Tonelify
Black Friday40% off yearly
Electric guitar

Schecter Hellraiser C-1 tone settings

⚡ Match a tone on this guitar
Pickup layoutHH
  1. neckHumbucker
  2. middleNo pickup
  3. bridgeHumbucker
The pickups on the Schecter Hellraiser C-1, from the neck on the left to the bridge on the right. A diagram, so their angle, size and spacing are not the instrument's own.

How do you dial in a specific tone on a Schecter Hellraiser C-1?

Pickup output and position decide how hard the front of an amp gets driven, which means the Schecter Hellraiser C-1 needs different amp settings from a guitar with the opposite layout to land on the same sound. That difference is where most tone-chasing goes wrong: the settings were right, but they were written for someone else's pickups.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact electric guitar, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Schecter Hellraiser C-1 pickup switch positions

Schecter lists a 3-way switch and two push-pull volumes but not what each does. The positions are the usual layout for two pickups and one switch, the modes are from EMG, and the last column is Tonelify's suggestion for each. Neither maker says which knob position gives which mode; on most push-pull wiring, pulled up is the single coil.

Pickups from Schecter's Hellraiser C-1 specifications and modes from EMG's 81TW and 89R pages, read on 31 October 2026. The positions are the usual two-pickup layout and the last column is Tonelify's, not Schecter's.
SwitchModePickups onTonelify's pick for
Bridge endHumbuckerEMG 81TW, humbucker modeMetal rhythm, palm mutes, hard rock riffs
Bridge endSingle coilEMG 81TW, single coil modeBrighter crunch, funk and clean rhythm
MiddleHumbuckerBoth humbuckersClean chords and crunch with less bite
MiddleSingle coilBoth single coil modesGlassy clean and chorus parts
Neck endHumbuckerEMG 89R, humbucker modeLeads, legato, warm clean
Neck endSingle coilEMG 89R, single coil modeStrat-like clean and blues

Tonelify's Schecter Hellraiser C-1 starting points

Where to start the switch, the pickup mode and the tone for each style, on a 0 to 10 reading. These are Tonelify's, not Schecter's: start here and move one thing at a time.

Tonelify's starting points, not Schecter's.
StyleSwitchModeVolumeTone
Metal rhythmBridgeHumbucker108 to 10
Hard rockBridgeHumbucker107
Clean chordsMiddleSingle coil87
BluesNeckSingle coil7 to 86
LeadNeckHumbucker108

Schecter Hellraiser C-1 full spec sheet

The specifications Schecter lists for the Hellraiser C-1.

From the item data behind Schecter's Hellraiser C-1 page, read on 31 October 2026.
SpecSchecter Hellraiser C-1
BodyMahogany, arched quilted maple top
BindingAbalone with black, white and black multi-ply
NeckMahogany 3-piece, set neck with Ultra Access, Thin "C"
Neck depth.787" (20 mm) at the 1st fret, .866" (22 mm) at the 12th
Truss rod2-way adjustable, 5/32" (4 mm) Allen nut
Scale length25.5" (648 mm)
FretboardRosewood, 14" (355 mm) radius
Frets24 X-Jumbo
InlaysAbalone gothic crosses
NutGraph Tech XL Black Tusq, 1.653" (42 mm)
PickupsEMG 89R neck, EMG 81TW bridge
ControlsVolume (push-pull), volume (push-pull), tone, 3-way switch
Battery9-volt clip-in battery compartment
BridgeTonePros T3BT Tune-O-Matic with string thru body
HardwareBlack chrome, metal knurled knobs with set screw
StringsD'Addario NYXL 1046 (.010-.046)
CaseNot included, SGR-1C

Schecter Hellraiser C-1 specifications

Scale length
25.5"
Construction
Mahogany body with quilted maple top, set mahogany neck
Bridge
TonePros T3BT Tune-o-matic, strings through the body
Pickup layout
HH
Controls
3-way toggle, two push-pull volumes, one tone, active EMG 81TW and 89R

What the Schecter Hellraiser C-1 panel means when you dial it in

A 25.5" scale, mahogany body with quilted maple top, set mahogany neck. That is the longer of the two common scales, so the strings sit tighter at pitch and the low end stays defined under gain. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. Controls: 3-way toggle, two push-pull volumes, one tone, active EMG 81TW and 89R. TonePros T3BT Tune-o-matic, strings through the body, a fixed anchor, so pitch effects in the original have to come from a pedal or the picking hand. Every setting Tonelify writes for this instrument names the pickup position it was dialled in on, because moving the selector changes both the level hitting the amp and the frequency balance it arrives with.

What pickups does the Schecter Hellraiser C-1 have?

Two humbuckers, one at the neck and one at the bridge. In shorthand that is HH. Pickup output and position change how hard the front of an amp is driven, which is why the same song needs different gain settings on this guitar than on one with the opposite layout. Tonelify accounts for that when it writes the numbers.

Schecter Hellraiser C-1 questions

What pickups are in the Schecter Hellraiser C-1?

Active EMGs: an EMG 81TW in the bridge and an EMG 89R in the neck, per Schecter's specifications. Both are dual-mode pickups, a humbucker and a single coil in one housing.

What do the push-pull knobs on the Hellraiser C-1 do?

They switch the EMG pickups between their two modes. Schecter lists the controls as Volume (Push-Pull), Volume (Push-Pull), Tone and a 3-way switch, and EMG says each of these pickups has its humbucker and single coil modes accessed through a push/pull pot. Schecter does not say which volume belongs to which pickup, so pull one knob at a time while you play to hear which pickup changes. Neither Schecter nor EMG says which knob position is which mode here; on most push-pull wiring, pulled up is the single coil.

What does the EMG 81TW sound like?

EMG says the 81TW takes the EMG 81 and adds a separate single coil in the same housing, so it is not a traditional coil tap. The 81 side gives the crunch and attack the 81 is famous for, and EMG says its noise cancelling works in both modes.

What does the EMG 89R sound like?

EMG says the humbucker side of the 89R is rich, warm and powerful but still clear, similar to its 85, and the single coil mode gives the traditional Strat sound, bright, airy and chimey, very similar to its SA. On the 89R the coils are reversed so the single coil side sits closer to the neck.

What does the 3-way switch on the Hellraiser C-1 do?

It picks the pickups. Schecter lists a 3-way switch but does not describe each position. On a guitar with two pickups and one 3-way toggle, one end selects the neck pickup, the middle both and the other end the bridge pickup. Flip it while you play to hear which end is which.

What is the best Hellraiser C-1 setting for metal?

Tonelify's pick: bridge pickup in humbucker mode, volume at 10 and tone at 8 to 10, into a high gain amp. For leads, switch to the neck pickup. Schecter gives no settings per style: these are Tonelify's.

Does the Hellraiser C-1 need a battery?

Yes. The EMG pickups are active, and Schecter lists a 9-volt clip-in battery compartment. EMG's 81TW instructions give a current of 160 microamps at 9 V and about 1500 hours of battery life for that pickup. EMG wires its pickups to a stereo output jack, which on active guitars usually switches the battery on when a cable is plugged in, so unplug the cable when you stop playing.

What is the scale length of the Schecter Hellraiser C-1?

25.5" (648 mm), per Schecter, with 24 X-Jumbo frets on a 14" (355 mm) radius rosewood fretboard and abalone gothic cross inlays.

What neck does the Hellraiser C-1 have?

A 3-piece mahogany set neck with Schecter's Ultra Access heel, in the Thin "C" shape, .787" (20 mm) deep at the 1st fret and .866" (22 mm) at the 12th. The nut is a Graph Tech XL Black Tusq, 1.653" (42 mm) wide.

What is the Hellraiser C-1 body made of?

Mahogany with an arched quilted maple top, per Schecter, with abalone binding edged in black, white and black multi-ply.

What bridge does the Hellraiser C-1 have?

A TonePros T3BT Tune-O-Matic with string thru body, per Schecter, in black chrome hardware. This version has no tremolo; Schecter lists the Hellraiser C-1 FR as a separate model.

What strings come on the Hellraiser C-1?

D'Addario Regular Light NYXL 1046, a 10 to 46 set, per Schecter.

How do I adjust the truss rod on a Hellraiser C-1?

Schecter lists a 2-way adjustable rod with a 5/32" (4 mm) Allen nut. Turn it in small steps and let the neck settle between turns.

Does the Schecter Hellraiser C-1 come with a case?

No. Schecter lists the case as not included and names the SGR-1C hardcase for it.

What amp settings suit a Schecter Hellraiser C-1?

The HH layout on this instrument is what decides it. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. That changes the gain setting more than any other control, which is why the same song needs different numbers on this instrument than on one with the opposite layout.

Do I need to change my settings when I switch pickups on the Schecter Hellraiser C-1?

Yes. Moving from a neck position to a bridge position changes both the output level hitting the amp and the frequency balance, so a setting dialled in on one pickup rarely holds up on the other. Every set of settings Tonelify returns names the pickup position it was written for.

Does Tonelify support the Schecter Hellraiser C-1?

Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.

Sources

Panel, specifications and dates checked against these on .

Schecter's product page builds its spec list with JavaScript, so the specs were read from the item data the page loads from Schecter's own store. Schecter does not say what each switch position or push-pull knob does; the switch table gives the usual two-pickup layout and the pickup modes from EMG's pages. The picks and starting points are Tonelify's, not Schecter's: Schecter gives no settings per style.

More Schecter gear

Similar guitars from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Schecter Hellraiser C-1 in it. A first plan starts with 7 days free, $0 today.