Tonelify
Reviewed

Artist

Avenged Sevenfold amp settings and guitar tones

3 songs, each with a starting point and the rig from its sources

What amp settings do you need for Avenged Sevenfold?

Tonelify's library has 3 Avenged Sevenfold songs, each with the rig reported in interviews and articles and a reference starting point on a generic five-knob amp. There is no single Avenged Sevenfold setting. Every one of them starts at Gain 7, so the differences are in the EQ, the pickup and the effects.

The numbers below are the same ones each song page gives. The rig for each song is on its own page with the sources it comes from.

Avenged Sevenfold songs and their starting points

Hail to the King by Avenged Sevenfold album artwork

Hail to the King

DistortedRiff2010s

Heavy, mid-paced crunch riffs set back in the mix under a pounding drum beat.

Start at Gain 7, Bass 5, Middle 4, Treble 7, Presence 6, Reverb 2, with the bridge pickup.

Guitar
Schecter signature guitars, Seymour Duncan Invaders
Amp
Schecter Hellwin USA 100 and Hellwin cabinet
Hail to the King: full settings, rig and sources →
Nightmare by Avenged Sevenfold album artwork

Nightmare

DistortedRiff2010s

A straightforward thrashing riff with harmonized twin leads and a widescreen chorus.

Start at Gain 7, Bass 5, Middle 4, Treble 7, Presence 6, Reverb 2, with the bridge pickup.

Guitar
Schecter Synyster Custom and Vengeance Custom
Amp
Bogner Uberschall, Diezel and two Marshalls (album rig)
Nightmare: full settings, rig and sources →

These are positions on a generic five-knob amp with gain, bass, middle, treble and presence, each running 0 to 10. They are a starting point, not the settings used on the record, and they will not transfer unchanged to an amp with a different gain structure or EQ voicing.

What gear did Avenged Sevenfold use?

SongGuitar and amp
Unholy ConfessionsTwo guitars, models not documentedHigh gain, model not documented
Hail to the KingSchecter signature guitars, Seymour Duncan InvadersSchecter Hellwin USA 100 and Hellwin cabinet
NightmareSchecter Synyster Custom and Vengeance CustomBogner Uberschall, Diezel and two Marshalls (album rig)

Tonelify reads each of these chains and translates it to the amp and guitar you already own. Adapt one to your gear →

Avenged Sevenfold tone questions

What amp settings do you need for Avenged Sevenfold?

It depends on the song. On a generic five-knob amp, Unholy Confessions starts at Gain 7, Bass 5, Middle 5, Treble 6, Presence 6, Reverb 1; Hail to the King starts at Gain 7, Bass 5, Middle 4, Treble 7, Presence 6, Reverb 2; Nightmare starts at Gain 7, Bass 5, Middle 4, Treble 7, Presence 6, Reverb 2. These are starting points, not the settings used on the records.

What gear did Avenged Sevenfold use on these songs?

Unholy Confessions: Two guitars, models not documented; High gain, model not documented. Hail to the King: Schecter signature guitars, Seymour Duncan Invaders; Schecter Hellwin USA 100 and Hellwin cabinet. Nightmare: Schecter Synyster Custom and Vengeance Custom; Bogner Uberschall, Diezel and two Marshalls (album rig). Each song page lists the sources behind its rig.

Can you get the Avenged Sevenfold tone without the original gear?

Yes. What carries these sounds is the gain structure, the EQ curve, the pickup position and the order of the effects, and all four can be rebuilt on other equipment. Tonelify rewrites each starting point for the amp and guitar you own.

More artists