Tonelify
Black Friday40% off yearly
Electric guitar

Harley Benton Fusion-T tone settings

⚡ Match a tone on this guitar
Pickup layoutHH
  1. neckHumbucker
  2. middleNo pickup
  3. bridgeHumbucker
The pickups on the Harley Benton Fusion-T, from the neck on the left to the bridge on the right. A diagram, so their angle, size and spacing are not the instrument's own.

How do you dial in a specific tone on a Harley Benton Fusion-T?

Pickup output and position decide how hard the front of an amp gets driven, which means the Harley Benton Fusion-T needs different amp settings from a guitar with the opposite layout to land on the same sound. That difference is where most tone-chasing goes wrong: the settings were right, but they were written for someone else's pickups.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact electric guitar, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Harley Benton Fusion-T switch positions and coil split

Harley Benton lists a 3-way switch and a push/pull tone for single-coil/humbuckers, but does not name the positions. The position names are the usual two humbucker layout, not Harley Benton's words. The last column is Tonelify's suggestion for each.

Controls as Harley Benton lists them for the Fusion-T HH Roasted FNT, read on 3 November 2026. Position names are general; the last column is Tonelify's, not Harley Benton's.
SwitchPickupsTone knobTonelify's pick for
BridgeBridge humbuckerPushed in, humbuckerMetal, hard rock rhythm, leads
BridgeBridge humbuckerPulled, single coilCountry, tighter crunch
MiddleBothPushed in, humbuckerFull clean chords, blues
MiddleBothPulled, single coilFunk, glassy clean
NeckNeck humbuckerPushed in, humbuckerSmooth leads, jazz
NeckNeck humbuckerPulled, single coilBright clean arpeggios

Tonelify's Harley Benton Fusion-T starting points

Where to start the switch, the coil split and the two knobs for each style, on a 0 to 10 reading. These are Tonelify's, not Harley Benton's: start here and move one thing at a time.

Tonelify's starting points, not Harley Benton's.
StyleSwitchTone knobVolumeTone
MetalBridgeHumbucker108
Hard rock leadBridgeHumbucker107
BluesNeckHumbucker86
FunkMiddleSingle coil109
Clean arpeggiosNeckSingle coil108

Harley Benton Fusion-T HH Roasted FNT full spec sheet

The specifications Harley Benton lists for the Fusion-T HH Roasted FNT.

From Harley Benton's Fusion-T HH Roasted FNT page, read on 3 November 2026.
SpecHarley Benton Fusion-T HH Roasted FNT
BodyNyatoh (Palaquium spp), ergonomically shaped
TopFlamed maple veneer
BindingNatural wood
NeckBolt-on, roasted Canadian flamed maple, Modern-C
FretboardRoasted maple, 305 mm radius, dot inlays
Scale length648 mm
NutGraphtech TUSQ XL, 42 mm
Frets22, medium jumbo Blacksmith stainless steel
PickupsRoswell LAF-B-CR Alnico-5 (bridge), LAF-N-CR Alnico-5 (neck)
ControlsMaster volume, master tone with push/pull for single-coil/humbuckers
Switching3-way switch
BridgeWilkinson 50IIK 2-point tremolo
TunersWSC staggered locking die-cast
HardwareChrome
Strings.010 to .046
FinishGloss Flame Natural

Harley Benton Fusion-T specifications

Scale length
25.5"
Construction
Nyatoh body, bolt-on roasted flamed maple neck
Bridge
Wilkinson 50IIK two-point tremolo
Pickup layout
HH
Controls
3-way toggle, master volume, master tone with push/pull coil split

What the Harley Benton Fusion-T panel means when you dial it in

A 25.5" scale, nyatoh body, bolt-on roasted flamed maple neck. That is the longer of the two common scales, so the strings sit tighter at pitch and the low end stays defined under gain. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. Controls: 3-way toggle, master volume, master tone with push/pull coil split. Wilkinson 50IIK two-point tremolo, so anything in the original that moves the pitch by hand can be played rather than approximated with an effect. Every setting Tonelify writes for this instrument names the pickup position it was dialled in on, because moving the selector changes both the level hitting the amp and the frequency balance it arrives with.

What pickups does the Harley Benton Fusion-T have?

Two humbuckers, one at the neck and one at the bridge. In shorthand that is HH. Pickup output and position change how hard the front of an amp is driven, which is why the same song needs different gain settings on this guitar than on one with the opposite layout. Tonelify accounts for that when it writes the numbers.

Harley Benton Fusion-T questions

What pickups are in the Harley Benton Fusion-T?

Two Roswell Alnico-5 humbuckers, per Harley Benton's specifications for the Fusion-T HH Roasted FNT: the LAF-B-CR at the bridge and the LAF-N-CR at the neck. Harley Benton says they take you from mellow, rounded tones to the full-throated roar of a classic humbucker.

What does the push/pull tone knob on the Fusion-T do?

Harley Benton lists a master tone control with a push/pull function for single-coil/humbuckers: one position gives the full humbucker sound, the other a single coil sound. Harley Benton does not say which coil of each pickup stays on. As a general rule a split humbucker is thinner, brighter and quieter, so raise the amp volume a little after you pull it.

What does each position of the Fusion-T's 3-way switch select?

Harley Benton lists a 3-way switch without naming the positions. On a two humbucker guitar the usual layout is bridge pickup, both pickups and neck pickup; that is general, not Harley Benton's words, so check yours by tapping each pickup with the amp low.

What are the knobs on the Harley Benton Fusion-T?

Two, per Harley Benton: a master volume knob and a master tone control with the push/pull coil split. Both work on whichever pickups the 3-way switch selects.

What is the best Fusion-T setting for metal and hard rock?

Tonelify's pick: the bridge humbucker with the tone knob pushed in for the full humbucker, volume at 10 and tone at 8, into a high-gain amp. Harley Benton gives no settings per style: these are Tonelify's.

What is the best Fusion-T setting for clean and funk?

Tonelify's pick: both pickups with the tone knob pulled for single coils, volume at 10 and tone at 9, into a clean amp. For a rounder clean, move to the neck pickup. Harley Benton gives no settings per style: these are Tonelify's.

What is the scale length of the Fusion-T?

648 mm, about 25.5 inches, per Harley Benton's specifications, with 22 medium jumbo Blacksmith frets made of stainless steel.

What neck does the Harley Benton Fusion-T have?

A bolt-on neck of roasted Canadian flamed maple with a roasted maple fretboard, per Harley Benton. It lists a Modern-C profile, a 305 mm fretboard radius, a 42 mm nut width and a Graphtech TUSQ XL nut. Harley Benton says the roasted neck and fingerboard give you plenty of snap and precision.

What is the Fusion-T body made of?

Nyatoh (Palaquium spp) with a flamed maple veneer top and natural wood binding, per Harley Benton, in an ergonomically shaped body. The Roasted FNT finish is Gloss Flame Natural.

What bridge does the Fusion-T have, and can you dive bomb with it?

A Wilkinson 50IIK 2-point tremolo, per Harley Benton, with WSC staggered locking die-cast machine heads. Harley Benton's page says the smooth-acting floating tremolo lets you add subtle vibrato or dive bomb to your heart's content.

What strings come on the Harley Benton Fusion-T?

.010 to .046 from the factory, per Harley Benton's specifications. A heavier set pulls the floating tremolo forward, so the springs in the back need adjusting after a gauge change.

Is the Harley Benton Fusion-T still made?

Harley Benton's page for the Fusion-T HH Roasted FNT showed it as sold out on 3 November 2026. Harley Benton now sells the Fusion-T II, which it describes as 18 T-shape guitars with Tesla twin humbuckers, including one EMG model, and a Babicz tremolo or hardtail bridge.

Is there a left-handed Fusion-T?

Yes. Harley Benton's page for the right-handed model links to a Fusion-T HH LH Roasted FNT under its related models.

What do owners say about the Fusion-T?

Harley Benton's page shows a rating of 4.8 out of 5 from 100 reviews, collected on thomann.de, with sound rated 4.5 and quality 4.6 when Tonelify read it on 3 November 2026.

What amp settings suit a Harley Benton Fusion-T?

The HH layout on this instrument is what decides it. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. That changes the gain setting more than any other control, which is why the same song needs different numbers on this instrument than on one with the opposite layout.

Do I need to change my settings when I switch pickups on the Harley Benton Fusion-T?

Yes. Moving from a neck position to a bridge position changes both the output level hitting the amp and the frequency balance, so a setting dialled in on one pickup rarely holds up on the other. Every set of settings Tonelify returns names the pickup position it was written for.

Does Tonelify support the Harley Benton Fusion-T?

Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.

Sources

Panel, specifications and dates checked against these on .

The controls and specs are Harley Benton's own, from its Fusion-T HH Roasted FNT page. Harley Benton does not name the switch positions or say which coils the push/pull drops, so those are described in general terms. The picks and starting points are Tonelify's, not Harley Benton's: Harley Benton gives no settings per style.

Similar guitars from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Harley Benton Fusion-T in it. A first plan starts with 7 days free, $0 today.