Tonelify
Black Friday40% off yearly
Electric guitar

Sterling by Music Man Cutlass tone settings

⚡ Match a tone on this guitar
Pickup layoutSSS
  1. neckSingle coil
  2. middleSingle coil
  3. bridgeSingle coil
The pickups on the Sterling by Music Man Cutlass, from the neck on the left to the bridge on the right. A diagram, so their angle, size and spacing are not the instrument's own.

How do you dial in a specific tone on a Sterling by Music Man Cutlass?

Pickup output and position decide how hard the front of an amp gets driven, which means the Sterling by Music Man Cutlass needs different amp settings from a guitar with the opposite layout to land on the same sound. That difference is where most tone-chasing goes wrong: the settings were right, but they were written for someone else's pickups.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact electric guitar, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Sterling Cutlass 5-way switch positions

Sterling lists a 5-way pickup selector on both models but does not publish what each position picks. The first two columns are the standard 5-way layout for a guitar with three pickups, not Sterling's own chart; the last column is Tonelify's suggestion for each.

The standard 5-way layout, not a chart from Sterling. Sterling does not say whether the in-between bridge position on the HSS model uses the whole humbucker or one coil. The last column is Tonelify's.
Lever positionSSS modelSUB Series HSS modelTonelify's pick for
Toward the bridgeBridgeBridge humbuckerRock riffs, leads that cut
SecondBridge and middleHumbucker and middle (wiring not published)Funk rhythm, bright clean
MiddleMiddleMiddleClean rhythm, brighter blues
FourthMiddle and neckMiddle and neckGlassy clean, chorus parts
Toward the neckNeckNeckWarm clean, blues leads

Tonelify's Sterling Cutlass starting points

Where to start the switch and the two knobs for each style, on a 0 to 10 reading. These are Tonelify's, not Sterling's: start here and move one thing at a time.

Tonelify's starting points, not Sterling's.
StyleLever positionVolumeTone
Hard rock (HSS)Toward the bridge108 to 10
Classic rock riffs (SSS)Toward the bridge107
Funk cleanSecond87
Clean chordsFourth87
Blues leadToward the neck106

Sterling Cutlass full spec sheet

The specifications Sterling lists for the Cutlass CT30 SSS and the SUB Series Cutlass HSS, side by side.

From Sterling's Cutlass CT30 SSS and SUB Series Cutlass pages, archived copies read on 31 October 2026.
SpecCutlass CT30 SSSSUB Series Cutlass
ModelCT30SSSCT30CHSS
BodyJabon (Pueblo Pink, Black), poplar (Daphne Blue)Poplar
NeckHard maple, 5 bolt patternHard maple, 5 bolt pattern
Truss rodSingle actionDual action
Scale length25.5" (64.8 cm)25.5" (64.8 cm)
Radius12" (30.5 cm)12" (30.5 cm)
Frets22, narrow22
Neck width1.65" (42 mm) at the nut, 2.24" (57 mm) at the last fret1.65" (42 mm) at the nut, 2.23" (56.6 mm) at the last fret
FingerboardLaurel (Pueblo Pink), hard maple (Black, Daphne Blue)Hard maple (Daphne Blue), laurel (Olympic White, Sherwood Green)
Pickups3 ceramic single coils1 Alnico humbucker, 2 Alnico single coils
Controls1 volume, 1 tone, 5-way selector1 volume, 1 tone, 5-way selector
BridgeFulcrum tremoloFulcrum tremolo
TunersDiecastDiecast
PickguardWhiteParchment (Daphne Blue, Sherwood Green), tortoise shell (Olympic White)
Strings.009 to .042.009 to .042
Gig bagNot includedNot included
Listed price$349.99 USD$379.99 USD

Sterling by Music Man Cutlass specifications

Scale length
25.5"
Construction
Jabon or poplar body, bolt-on hard maple neck
Bridge
Fulcrum tremolo
Pickup layout
SSS
Controls
5-way selector, master volume, master tone

What the Sterling by Music Man Cutlass panel means when you dial it in

A 25.5" scale, jabon or poplar body, bolt-on hard maple neck. That is the longer of the two common scales, so the strings sit tighter at pitch and the low end stays defined under gain. Single coils send a lower-output, brighter signal into the input, so they need more gain to reach the same saturation and less treble to stay comfortable. Controls: 5-way selector, master volume, master tone. Fulcrum tremolo, so anything in the original that moves the pitch by hand can be played rather than approximated with an effect. Every setting Tonelify writes for this instrument names the pickup position it was dialled in on, because moving the selector changes both the level hitting the amp and the frequency balance it arrives with.

What pickups does the Sterling by Music Man Cutlass have?

Three single coils: one at the neck, one in the middle position and one at the bridge. In shorthand that is SSS. Pickup output and position change how hard the front of an amp is driven, which is why the same song needs different gain settings on this guitar than on one with the opposite layout. Tonelify accounts for that when it writes the numbers.

Sterling by Music Man Cutlass questions

What pickups are in the Sterling Cutlass?

It depends on the model. Sterling lists the Cutlass CT30 SSS with three ceramic single coils, which it describes as three vintage-inspired Sterling by Music Man designed single coil pickups. The SUB Series Cutlass is an HSS model: Sterling lists one Alnico humbucker and two Alnico single coils.

What does each position of the 5-way switch on the Cutlass select?

Sterling's pages list a 5-way pickup selector but do not say what each position picks. On the standard 5-way layout for three single coils, the lever toward the bridge gives the bridge pickup, then bridge and middle, the middle alone, middle and neck, and the neck pickup with the lever toward the neck. Check by tapping each pickup with a screwdriver at low volume.

What is the difference between the Cutlass CT30 SSS and the SUB Series Cutlass?

The pickups first: three ceramic single coils on the CT30 SSS, an Alnico humbucker at the bridge and two Alnico single coils on the SUB Series model, per Sterling. Sterling also lists a dual action truss rod on the SUB Series Cutlass against a single action rod on the CT30 SSS, and a parchment or tortoise shell pickguard against a white one. Both have a Fulcrum tremolo and a 25.5" scale.

What is the best Sterling Cutlass setting for clean funk?

Tonelify's pick: one of the two in-between positions, bridge and middle or middle and neck, with volume at 8 and tone at 7. Two single coils together give the hollow, quacky sound that funk rhythm parts use. Sterling gives no settings per style: these are Tonelify's.

What is the best Sterling Cutlass setting for rock?

Tonelify's pick: the bridge position with volume at 10 and tone at 8 to 10. On the SUB Series HSS model that is the Alnico humbucker, which suits crunch and hard rock best; on the SSS model it is a bright single coil for classic rock riffs. Sterling gives no settings per style: these are Tonelify's.

What is the scale length of the Sterling Cutlass?

25.5" (64.8 cm), per Sterling, on both the CT30 SSS and the SUB Series Cutlass, with 22 frets and a 12" (30.5 cm) radius. Sterling lists the CT30 SSS frets as narrow.

What neck does the Sterling Cutlass have?

A hard maple neck with a 5 bolt pattern, per Sterling. The neck is 1.65" (42 mm) wide at the nut on both models; at the last fret Sterling gives 2.24" (57 mm) for the CT30 SSS and 2.23" (56.6 mm) for the SUB Series Cutlass. The fingerboard is laurel or hard maple, depending on the finish.

What body wood is the Sterling Cutlass?

On the CT30 SSS, Sterling lists jabon for the Pueblo Pink and Black finishes and poplar for Daphne Blue. The SUB Series Cutlass is poplar in every finish.

What bridge does the Sterling Cutlass have?

A Fulcrum tremolo on both models, per Sterling, with diecast tuners and an oversized 4+2 headstock. Sterling says the bridge is designed to provide smooth and stable tremolo action, while also offering superior tuning stability and precise intonation.

What strings come on the Sterling Cutlass?

.009 to .042, per Sterling, on both models. A change to heavier strings pulls harder on the neck and the tremolo springs, so check the neck relief and the bridge after a gauge change.

Does the Sterling Cutlass come with a gig bag?

No. Sterling lists the gig bag as N/A for both the CT30 SSS and the SUB Series Cutlass.

What colors does the Sterling Cutlass come in?

Sterling lists the CT30 SSS in Pueblo Pink, Black and Daphne Blue, and the SUB Series Cutlass in Daphne Blue, Olympic White and Sherwood Green.

How much does the Sterling Cutlass cost?

Sterling listed the Cutlass CT30 SSS at $349.99 USD and the SUB Series Cutlass at $379.99 USD on its own pages. Street prices change, so check a dealer.

What amp settings suit a Sterling by Music Man Cutlass?

The SSS layout on this instrument is what decides it. Single coils send a lower-output, brighter signal into the input, so they need more gain to reach the same saturation and less treble to stay comfortable. That changes the gain setting more than any other control, which is why the same song needs different numbers on this instrument than on one with the opposite layout.

Do I need to change my settings when I switch pickups on the Sterling by Music Man Cutlass?

Yes. Moving from a neck position to a bridge position changes both the output level hitting the amp and the frequency balance, so a setting dialled in on one pickup rarely holds up on the other. Every set of settings Tonelify returns names the pickup position it was written for.

Does Tonelify support the Sterling by Music Man Cutlass?

Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.

Sources

Panel, specifications and dates checked against these on .

The specs are Sterling's, read from archived copies of its two Cutlass pages because the live site turned the request away. Sterling does not publish what each switch position picks, so the switch table is the standard 5-way layout, not Sterling's chart. The picks and starting points are Tonelify's, not Sterling's.

Similar guitars from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Sterling by Music Man Cutlass in it. A first plan starts with 7 days free, $0 today.