Tonelify
Black Friday40% off yearly
Electric guitar

Jackson Dinky tone settings

⚡ Match a tone on this guitar
Pickup layoutHH
  1. neckHumbucker
  2. middleNo pickup
  3. bridgeHumbucker
The pickups on the Jackson Dinky, from the neck on the left to the bridge on the right. A diagram, so their angle, size and spacing are not the instrument's own.

How do you dial in a specific tone on a Jackson Dinky?

Pickup output and position decide how hard the front of an amp gets driven, which means the Jackson Dinky needs different amp settings from a guitar with the opposite layout to land on the same sound. That difference is where most tone-chasing goes wrong: the settings were right, but they were written for someone else's pickups.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact electric guitar, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Jackson Dinky specifications

Scale length
25.5"
Construction
Bolt-on maple neck, superstrat body
Pickup layout
HH

What the Jackson Dinky panel means when you dial it in

A 25.5" scale, bolt-on maple neck, superstrat body. That is the longer of the two common scales, so the strings sit tighter at pitch and the low end stays defined under gain. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. Every setting Tonelify writes for this instrument names the pickup position it was dialled in on, because moving the selector changes both the level hitting the amp and the frequency balance it arrives with.

What pickups does the Jackson Dinky have?

Two humbuckers, one at the neck and one at the bridge. In shorthand that is HH. Pickup output and position change how hard the front of an amp is driven, which is why the same song needs different gain settings on this guitar than on one with the opposite layout. Tonelify accounts for that when it writes the numbers.

Jackson Dinky questions

What amp settings suit a Jackson Dinky?

The HH layout on this instrument is what decides it. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. That changes the gain setting more than any other control, which is why the same song needs different numbers on this instrument than on one with the opposite layout.

Do I need to change my settings when I switch pickups on the Jackson Dinky?

Yes. Moving from a neck position to a bridge position changes both the output level hitting the amp and the frequency balance, so a setting dialled in on one pickup rarely holds up on the other. Every set of settings Tonelify returns names the pickup position it was written for.

Does Tonelify support the Jackson Dinky?

Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.

More Jackson gear

Similar guitars from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Jackson Dinky in it. A first plan starts with 7 days free, $0 today.