Jackson Pro Series Soloist tone settings
⚡ Match a tone on this gearHow do you dial in a specific tone on a Jackson Pro Series Soloist?
Pickup output and position decide how hard the front of an amp gets driven, which means the Jackson Pro Series Soloist needs different amp settings from a guitar with the opposite layout to land on the same sound. That difference is where most tone-chasing goes wrong: the settings were right, but they were written for someone else's pickups.
Name the song you are chasing and Tonelify returns the settings for this exact electric guitar, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Jackson Pro Series Soloist specifications
- Scale length
- 25.5"
- Construction
- Neck-through three-piece maple neck
- Bridge
- Recessed Floyd Rose double-locking tremolo
- Pickup layout
- HH
What the Jackson Pro Series Soloist panel means when you dial it in
A 25.5" scale, neck-through three-piece maple neck. That is the longer of the two common scales, so the strings sit tighter at pitch and the low end stays defined under gain. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. Recessed Floyd Rose double-locking tremolo, so anything in the original that moves the pitch by hand can be played rather than approximated with an effect. Every setting Tonelify writes for this instrument names the pickup position it was dialled in on, because moving the selector changes both the level hitting the amp and the frequency balance it arrives with.
What pickups does the Jackson Pro Series Soloist have?
A HH layout. Pickup output and position change how hard the front of an amp is driven, which is why the same song needs different gain settings on this guitar than on one with the opposite layout. Tonelify accounts for that when it writes the numbers.
Tones to try on a Jackson Pro Series Soloist
Jackson Pro Series Soloist questions
What amp settings suit a Jackson Pro Series Soloist?
The HH layout on this instrument is what decides it. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. That changes the gain setting more than any other control, which is why the same song needs different numbers on this instrument than on one with the opposite layout.
Do I need to change my settings when I switch pickups on the Jackson Pro Series Soloist?
Yes. Moving from a neck position to a bridge position changes both the output level hitting the amp and the frequency balance, so a setting dialled in on one pickup rarely holds up on the other. Every set of settings Tonelify returns names the pickup position it was written for.
Does Tonelify support the Jackson Pro Series Soloist?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.