Neural DSP Quad Cortex mini presets and settings
The smaller Quad Cortex: the same CorOS devices, Neural Capture and 7in touchscreen, with four rotary footswitches and two Footswitch Pages. 3072 preset slots, eight scenes and a 12V 1.2A locking power input.
⚡ Match a tone on this unitHow do you dial in a specific tone on a Neural DSP Quad Cortex mini?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the Neural DSP Quad Cortex mini name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Quad Cortex mini footswitch shortcuts
Four footswitches, A and B on top, C and D at the bottom, do the work of the Quad Cortex's eleven through two-switch presses, holds and two Footswitch Pages.
| Press | What it does |
|---|---|
| A, B, C or D | Loads a Preset or a Scene, or turns a block on or off, by the active Mode |
| B + D | Cycles the Modes: PRESET, SCENE, STOMP and any HYBRID Mode you made |
| Hold B + D | Bank up in PRESET Mode; next Preset in SCENE or STOMP Mode |
| Hold A + C | Bank down in PRESET Mode; previous Preset in SCENE or STOMP Mode |
| A + C | Opens the Tuner |
| Hold D | Opens the Tempo and Metronome menu |
| B | Goes back to The Grid from the Tuner or the Tempo menu |
| Hold B | Swaps Footswitch Pages I and II for SCENE and STOMP assignments |
| Hold A | Opens Gig View, once turned on in Device Settings |
| Turn C | Moves the focus between the parameters on screen |
| Turn D | Changes the value of the focused parameter |
| Turn B | Cycles devices of the same category while a block's editor is open |
Quad Cortex mini vs Quad Cortex
Neural DSP's comparison on the Quad Cortex mini page. Both run the same CorOS with the same libraries, 200+ Virtual Devices, 2000+ Neural Captures and 1000+ IRs, and the same storage: 3072 presets, 2048 captures and 2048 IRs.
| Feature | Quad Cortex mini | Quad Cortex |
|---|---|---|
| Price | €1,299.00 | €1,749.00 |
| Footswitches | 4 stainless steel rotary footswitches | 11 stainless steel rotary footswitches |
| Size | 22.8 x 11.8 x 6.5 cm | 29 x 19.5 x 6.9 cm |
| Weight | 1.5 kg | 1.95 kg |
| Inputs | Input 1 on a 1/4in TS jack, Input 2 on a combo XLR and 1/4in TRS | Inputs 1 and 2 both on combo XLR and 1/4in TRS |
| Effects loops | Two, on one shared TRS Send and one shared TRS Return | Two, on separate TRS Sends and Returns |
| Outputs | 2 XLR, 2 1/4in TS, Capture Out | 2 XLR, 2 1/4in TRS, Capture Out |
| Headphones | 1/8in TRS | 1/4in TRS |
| MIDI | In and Out on 1/8in TRS Type-A, and over USB | In and Out on DIN, and over USB |
| Expression pedals | One on a 1/4in TRS jack, a second via MIDI | Two on 1/4in TRS jacks |
| USB audio | USB-C, 8 in and 8 out, 24 bit 48kHz | USB-A, 8 in and 8 out, 24 bit 48kHz |
| Master volume | + and - buttons | Knob |
| Power | 12V DC 1.2A, locking 2.1/5.5mm connector | 12V DC 3A, standard 2.1/5.5mm connector |
| Momentary footswitch assignments | No | Yes |
| Scenes and Stomp assignments | All 8, through Footswitch Pages | 8 per Preset |
Quad Cortex mini USB audio channels
16 USB channels, 8 in and 8 out, at 24 bit and a fixed 48kHz. The DRY/WET swap in I/O Settings can turn channels 1/2 and 3/4 around.
| Channel | To the computer (USB inputs) | From the computer (USB outputs) |
|---|---|---|
| 1 | Dry signal from INPUT 1 | Computer left to OUTPUT 1/L |
| 2 | Dry signal from INPUT 2 | Computer right to OUTPUT 2/R |
| 3 | Processed signal from OUTPUT 1/L | Computer left to OUTPUT 3/L |
| 4 | Processed signal from OUTPUT 2/R | Computer right to OUTPUT 4/R |
| 5 to 8 | The Grid's USB Output 5 to 8 blocks | Into The Grid as USB Input 5 to 8, for reamping |
Neural DSP Quad Cortex mini specifications
- Released
- 2026
Neural DSP Quad Cortex mini questions
What is the Neural DSP Quad Cortex mini?
A smaller Quad Cortex. Neural DSP calls it a fully fledged Quad Cortex in a smaller form factor, with the same processing power, the same 7in touchscreen and Neural Capture, but four footswitches instead of eleven. It measures 22.8 x 11.8 x 6.5 cm and weighs 1.5 kg. MusicRadar reported it from NAMM 2026 on 21 January 2026, out now at £1,129, $1,399 and €1,299.
What is the difference between the Quad Cortex mini and the Quad Cortex?
The sound and the software are the same: both run CorOS with the same 200+ Virtual Devices, 2000+ Neural Captures and 1000+ IRs, and store 3072 presets. The mini has 4 footswitches to the Quad Cortex's 11, no momentary footswitch assignments, one combo XLR input instead of two, both effects loops on one shared TRS Send and Return, MIDI on 1/8in TRS jacks instead of DIN, + and - buttons for the master volume instead of a knob, and a 12V 1.2A locking power supply instead of 12V 3A. Neural DSP's prices are €1,299.00 for the mini and €1,749.00 for the Quad Cortex. The full table is on this page.
Are Quad Cortex presets compatible with the Quad Cortex mini?
Yes. Neural DSP says presets and backups are cross-compatible between the two, and the mini gets the same CorOS updates at the same time. Page II of the mini's footswitches maps to the E, F, G and H footswitches of the Quad Cortex, so scene and stomp assignments carry over.
What amps and effects are in the Quad Cortex mini?
Neural DSP's FAQ for the mini lists 90+ amp models, 100+ effects, 1000+ cabinet IRs and 2000+ Neural Captures, preloaded with factory presets. They are the same Virtual Devices as on the Quad Cortex, so the amp, cab, drive, bass, capture and effects lists on Tonelify's Quad Cortex page, with the real amp behind each model name, apply to the mini as well.
How do the footswitches work on the Quad Cortex mini?
Through two-switch presses, holds and Footswitch Pages. Press B + D together to cycle the modes and A + C for the tuner. In PRESET Mode, hold B + D to bank up and A + C to bank down; presets come in banks of four. Hold B to swap between Page I and Page II, so each footswitch carries two scene or stomp assignments. The table of shortcuts is on this page.
Can the Quad Cortex mini use eight scenes?
Yes. Neural DSP says you still have access to eight Scenes, split across the two Footswitch Pages. To put a parameter in scenes, tap a block, then tap and hold the parameter: its value is then stored for each scene. A new preset starts on Scene A; save it while another scene is active to make that one the default.
Does the Quad Cortex mini have momentary footswitches?
No. Neural DSP says that because of its press-and-hold commands, Momentary Stomp assignments are not supported on the mini. The Quad Cortex has them. A Punch In set to Momentary inside the Looper X is a separate setting of that block.
How do you open the tuner and set the tempo on the Quad Cortex mini?
Press A + C for the tuner and hold D for the Tempo and Metronome menu; press B to go back to The Grid from either. In the tuner, FREQ sets the reference pitch, MUTE silences your signal and LIVE TUNER shows it at the top of Gig View. The Tempo menu sets the BPM, a GLOBAL or PRESET tempo mode and the metronome.
How do you change the volume on the Quad Cortex mini?
With the + and - buttons on the left edge. Each press moves the output volume by 5, holding either button moves it faster, and a quick double press of - mutes the output. The overlay that appears also lets you choose which outputs the master volume controls.
How do the effects loops work on the Quad Cortex mini?
There are two loops on one TRS Send 1/2 jack and one TRS Return 1/2 jack. A standard cable reaches Loop 1 only. For both loops use TRS insert cables, TRS to dual TS: the tip carries Send 1 or Return 1 and the ring Send 2 or Return 2. With an insert cable on Return 1/2, Neural DSP says the mini takes up to four instruments at once.
What power supply does the Quad Cortex mini need?
12V DC at 1.2A or more, centre negative, through a locking 2.1/5.5mm connector: turn the outer sleeve clockwise to lock it. The included non-locking adapter lets a standard pedalboard supply power it, such as the original Quad Cortex supply. USB-C carries data and audio only and does not power the unit.
Can you record and reamp with the Quad Cortex mini?
Yes. It is a USB 2.0, 24-bit, 48kHz (fixed) audio interface with 16 USB channels, 8 in and 8 out. USB Inputs 1 and 2 carry the dry signal of each input and 3 and 4 the processed signal, so a dry and a processed track record together. To reamp, send the dry track to Output 5 and pick USB Input 5 on The Grid's input block. A Mac needs no driver; Windows needs Neural DSP's driver. An iPhone 15 or later connects over USB-C.
How does Neural Capture work on the Quad Cortex mini?
Connect CAPTURE OUT to the pedal or amp, and bring the result back into INPUT 2/CAPTURE INPUT: straight from a pedal, from a mic on the cab, or from an amp head through a reactive load box. Version 1 trains on the unit in a few minutes, offline. Version 2 trains in Cortex Cloud: each session typically takes around 10 minutes, with up to 40 a day. Each capture gets a gain ranking from 1, clean, to 10.
How many presets does the Quad Cortex mini hold?
Up to 3072 user presets, in setlists of up to 256, with up to 10 user setlists. Use Save as… in The Grid's menu to keep the original preset. Since CorOS 4.1.0, most devices also keep up to 32 user Virtual Device Presets each, and Neural DSP lists 2,000+ Factory Device Presets, a quick way to load a block with Neural DSP's own settings.
Does the Quad Cortex mini have a looper?
Yes, the Looper X block. You place it on The Grid, where its position decides what it records, and its actions sit on both Footswitch Pages: record, overdub, play and stop, undo and redo, reverse, half speed, one shot and more. It can sync to the tempo or MIDI clock and set a fixed loop length from 1 to 32 bars.
Do Neural DSP plugins work on the Quad Cortex mini?
Yes. Log in to your Neural DSP account on the unit and the plugins you own unlock. A plugin license can be activated on up to three Quad Cortex and three Quad Cortex mini devices per Neural DSP account, needs internet once to verify, and 14-day trials are not valid perpetual licenses.
Can you use the Quad Cortex mini without a computer or internet?
Yes. Neural DSP says it works standalone, and that an internet connection is only needed for firmware updates, Cortex Cloud downloads and Neural Capture V2. Neural DSP also says a new unit may ship with an older CorOS, so update it when it arrives.
What did reviewers say about the Quad Cortex mini?
MusicRadar's review of 9 February 2026 called it everything the Quad Cortex is, just in a smaller box, and found the touchscreen not the most responsive. Guitar World's review rated its sounds five stars and called it an incredibly powerful, incredibly versatile pedal, while warning that the footswitch shortcuts take learning and that at $1,399 it is only about $400 below the full Quad Cortex.
How do you build a patch on the Neural DSP Quad Cortex mini?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the Neural DSP Quad Cortex mini?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
- Neural DSP: Quad Cortex mini User Manual, CorOS 4.1.1
- Neural DSP: Quad Cortex mini product page, with its FAQ
- MusicRadar: Neural DSP Quad Cortex mini, NAMM 2026, 21 January 2026
- MusicRadar: Neural DSP Quad Cortex mini review, 9 February 2026
- Guitar World: Neural DSP Quad Cortex mini review
The manual and the product page were read on 17 November 2026. Neural DSP gives no knob values per amp; its own starting points are the factory presets and Factory Device Presets on the unit.
More Neural DSP gear
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Neural DSP Quad Cortex mini in it. A first plan starts with 7 days free, $0 today.