HeadRush Flex Prime presets and settings
Compact floor modeller with a 4-inch touchscreen, three footswitches and an expression pedal. The same DSP and models as the Core, 14 slots per rig in five signal paths, native NAM loading and a 5-minute looper.
⚡ Match a tone on this unitHow do you dial in a specific tone on a HeadRush Flex Prime?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the HeadRush Flex Prime name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
HeadRush Flex Prime vs HeadRush Core
HeadRush says the Flex Prime has the same DSP power as the Prime and Core, so the sounds and rigs carry over. The differences are in the hardware.
| Feature | Flex Prime | Core |
|---|---|---|
| Footswitches | 3, with a second bank of 3 per rig if you set footswitch 3's hold to Bank A/B | 5 |
| Display | 4in touchscreen | 7in touchscreen |
| Blocks per rig | 14 | Same DSP power, per HeadRush |
| Vocal effects and mic input | No | Yes, XLR and 1/4in mic input |
| Main outputs | 1/4in stereo pair | 1/4in and XLR stereo pairs |
| MIDI | In and Out on 1/8in jacks | In and Out on 5-pin DIN |
| USB | Type-B | Type-A and Type-B |
| External amp switching output | No | Yes |
| Effects loop | 1/4in TRS send and return, stereo or mono | 1/4in TRS send and return |
| Power | 12V DC, 3A, centre positive | 12V DC, 3A, centre positive |
| Size | 295 x 150 x 70 mm | 408 x 235 x 67 mm |
| Weight | 1.57 kg | 3.80 kg |
HeadRush Flex Prime footswitch shortcuts
Three footswitches. By default an action happens when you let go, so a hold can do something else; set Footswitch Function to On Press and some holds stop working.
| Press | What it does |
|---|---|
| Hold 1, then press 1 | Stomp mode: the three switches turn blocks on and off |
| Hold 1, then press 2 | Rig mode: the three switches load rigs |
| Hold 1, then hold 2 | Setlist mode |
| Hold 1, press 3, then press 1 | Hybrid mode: switch 1 for a block or scene, 2 and 3 for previous and next rig |
| Hold 1, then hold 1 again | Hands-Free mode: edit any setting with the footswitches and expression pedal |
| Hold 1, press 3, then press 2 | Drum machine |
| Hold 1, press 3, then hold 2 | Practice Tool |
| Hold 1, then hold 3 | Lock Screen on or off |
| 1 + 2 together | Previous rig in Stomp mode, previous bank of three in Rig mode |
| 2 + 3 together | Next rig in Stomp mode, next bank of three in Rig mode |
| Hold 2 | Looper |
| Hold 3 | Tuner, or Bank A/B if you reassign it |
| Hold 2 + 3 while powering on | Factory reset, which deletes rigs, loops, clones and settings |
HeadRush Flex Prime signal paths
Each rig has 14 slots for amps, cabs, IRs, clones, NAM captures and effects, in one of five layouts. Split paths are mixed back together in the Mix block.
| Path | Layout |
|---|---|
| Straight Path | All 14 slots in a row; the default |
| Middle Split 3-4-3 | 3 slots, a split of 4 slots on each side, then 3 slots |
| Middle Split 5-3-3 | 5 slots, a split of 3 slots on each side, then 3 slots |
| Middle Split 7-2-3 | 7 slots, a split of 2 slots, one on each side, then 3 slots |
| Immediate Split | A split straight from the input with 5 slots on each side, then 4 slots |
HeadRush Flex Prime USB audio channels
A 24-bit USB audio interface at 44.1, 48 or 96 kHz, with 4 channels each way. Windows needs HeadRush's driver.
| Channel | To the computer | From the computer |
|---|---|---|
| 1 | Left output, with all effects | Left, to the main and headphone outputs |
| 2 | Right output, with all effects | Right, to the main and headphone outputs |
| 3 | Dry guitar input, mono | Mono, back through Flex Prime for reamping |
| 4 | Same as channel 3 | Not used |
HeadRush Flex Prime specifications
- Released
- 2024
HeadRush Flex Prime questions
What is the HeadRush Flex Prime?
A compact floor amp modeller and multi-effects unit for guitar and bass, with a 4in touchscreen, three footswitches and a built-in expression pedal. HeadRush lists more than 600 amps, cabs, mics and effects, loads NAM captures natively and connects to TONE3000 over Wi-Fi. Sound On Sound reported its launch on 15 November 2024 at $499. It weighs 1.57 kg.
What is the difference between the HeadRush Flex Prime and the Core?
HeadRush says the Flex Prime has the same DSP power as the Prime and Core, and rigs, setlists and clones from those load on it. The Flex Prime is smaller, with a 4in screen and 3 footswitches against the Core's 7in screen and 5 footswitches, and it has no vocal effects, mic input, XLR outputs, external amp switching output or USB-A port. Its MIDI uses 1/8in jacks instead of 5-pin DIN. It weighs 1.57 kg to the Core's 3.80 kg. The full table is on this page.
What amps and effects are in the HeadRush Flex Prime?
The same models as the Core and Prime. HeadRush's page lists 100+ effects, 100+ amps, 80+ cabs, 360+ cab IRs and 50+ convolution reverbs. Tonelify's HeadRush Core page has the full amp list, with the real amp behind each HeadRush and ReValver model name, and it applies to the Flex Prime.
How many presets does the HeadRush Flex Prime have?
HeadRush's FAQ says it comes with 40 factory rigs across a range of styles, and more are on HeadRush Cloud over Wi-Fi. Each rig can hold its own scenes, footswitch assignments, tempo and MIDI program number. Rigs from the Core and Prime load too; from the Pedalboard, Gigboard and MX5 they are converted to the Flex Prime's 14 blocks, and vocal blocks are left out.
Can the HeadRush Flex Prime load NAM captures?
Yes, natively, without conversion. HeadRush Cloud connects to TONE3000, which HeadRush says holds 500,000+ NAM captures: log in by QR code and download them on the unit. NAM A2 captures run in Full or Lite quality, and switch to Lite when a rig has more than two of them. HeadRush's own Clones and SuperClones load too, made with the ReValver Amp Cloner that comes with the unit.
How do the footswitch modes work on the HeadRush Flex Prime?
Hold footswitch 1 to choose a mode: press 1 for Stomp, where the switches turn blocks on and off; 2 for Rig, where they load rigs; hold 2 for Setlist; or press 3 then 1 for Hybrid, where switch 1 controls a block or scene and 2 and 3 step through rigs. In Stomp and Rig mode, 1 + 2 goes back and 2 + 3 goes forward. The shortcuts table is on this page.
Can you get more than three footswitches on the HeadRush Flex Prime?
Yes, six per rig. Reassign the hold of footswitch 3 from Tuner to Bank A/B, and holding it swaps to a second bank of three assignments. This works only while Footswitch Function in Global Settings is set to On Release, the default.
How do scenes work on the HeadRush Flex Prime?
A scene is a footswitch that turns several blocks on or off, or loads block presets, in one press. In Hardware Assign, set a footswitch to Scene and tap Edit, then set each block to On, Off or No Change. A footswitch can hold two scene states and toggle between them, and a scene can send up to 5 MIDI messages.
What signal paths does the HeadRush Flex Prime have?
Five, each with 14 slots: Straight Path, three Middle Splits (3-4-3, 5-3-3 and 7-2-3) and an Immediate Split from the input. Amps, cabs and IRs can also be doubled in one slot, side by side in stereo or switched from a footswitch.
How do you set up the HeadRush Flex Prime with a guitar amp?
In Global Settings, Audio, set Main Out Level to Amp, +6 dBu, for a traditional guitar amp, or leave it on Line, +18 dBu, for an FRFR speaker, PA, mixer or interface. For pedals in the effects loop set FX-Loop Level to Stomp, and for rack units to Rack; the FX Loop block goes anywhere in the chain.
How long is the looper on the HeadRush Flex Prime?
Up to 5 minutes per loop and 20 minutes of overdubbed audio in total, across up to 50 layers. Hold footswitch 2 for over a second to open it.
How do you use the tuner on the HeadRush Flex Prime?
Hold footswitch 3 for over a second, or set the volume pedal to open it at toe up. The reference is 440 Hz by default and can be changed, with a Guitar or Bass range. Footswitch 1 mutes or unmutes the signal and footswitch 3 exits.
Does the HeadRush Flex Prime have a drum machine?
Yes, with one kit preloaded and room for 16 in total; more kits come through Activations in Global Settings. Open it from the menu, or hold footswitch 1, press 3 and then 2. A Practice Tool also plays songs from storage, Dropbox or Tidal with loop points and speed and pitch control.
Can you record with the HeadRush Flex Prime?
Yes, over USB-B as a 24-bit audio interface at 44.1, 48 or 96 kHz. It sends 4 channels: the left and right processed outputs and the dry guitar on 3 and 4, so you can record dry and processed together. To reamp, send the dry track to channel 3 with USB Mode set to ReAmp. Windows needs HeadRush's driver.
Can you edit the HeadRush Flex Prime from a computer?
Yes, over Wi-Fi, with no software to install: open a browser on a Mac, PC or tablet and enter the IP address shown in Global Settings. The Remote Editor edits rigs, setlists, the tuner, Global EQ and settings. Rigs and files also move over USB, Dropbox and HeadRush Cloud.
What power supply does the HeadRush Flex Prime need?
12V DC at 3A, centre positive, from the included adapter.
What did reviewers say about the HeadRush Flex Prime?
Mixdown's review of 5 December 2024 called it sturdy, with heavy-duty switches, and found the menus easy to navigate, with tones from ambient cleans to high gain. It singled out the 5-minute looper and the bundled ReValver Amp Cloner, which can clone amps and plugins.
How do you build a patch on the HeadRush Flex Prime?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the HeadRush Flex Prime?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
- HeadRush: Flex Prime User Guide v5.2.0 (PDF)
- HeadRush: Flex Prime product page
- HeadRush: Flex Prime Frequently Asked Questions
- HeadRush: Core User Guide v5.2.0, for the comparison
- Sound On Sound: HeadRush Flex Prime, FRFR-GO & ReValver Amp Cloner, 15 November 2024
- Mixdown: Reviewed: Headrush Flex Prime, 5 December 2024
The guide, product page and FAQ were read on 17 November 2026. HeadRush gives no knob values for its models; its own starting points are the 40 factory rigs and the rigs on HeadRush Cloud.
More HeadRush gear
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the HeadRush Flex Prime in it. A first plan starts with 7 days free, $0 today.