Tonelify
Black Friday40% off yearly
Reviewed
Boss KatanaCleanRiffGrunge

Come As You Are on a Boss Katana

Nirvana

Written for the Katana 50 MkII and the Katana 50 Gen 3, which share these knobs. The Katana 100 adds a Presence knob, and its value is given under the panel.

Come As You Are Boss Katana settings: a starting point

On a Boss Katana, select the Clean amp type and start at Gain 2, Bass 6, Middle 4, Treble 6 and Reverb about 3, with the neck or middle position.

Clean amp typeCome As You Are on the Katana
  • Gain 2
  • Bass 6
  • Middle 4
  • Treble 6
  • Reverb about 3

The Katana 50 has no Presence knob. On a Katana 100, set Presence to 5.

Positions on a 0 to 10 scale, with 5 at twelve o'clock. These are Tonelify's starting points for the Katana, written from the documented rig and BOSS's manual. They are not BOSS's numbers and not the settings on the record.

Match Come As You Are to my rigYour guitar and pedals too. 7 days free.

Picked by gain range

Which Boss Katana amp type for Come As You Are?

Clean. The riff is a Fender offset guitar through an Electro-Harmonix Small Clone chorus, most likely into a Vox AC30 kept clean. BOSS names no real amp behind the Katana's types, so there is no AC30 to pick. Use Clean, which BOSS describes as a clean and natural sound, and let the Chorus in the Mod section make the watery wobble that is this riff.

Pick the amp type first: it changes the gain structure more than any knob does, so the same Gain position gives far more distortion on Lead or Brown than on Crunch. Gain sets the amount of distortion, Volume the level of that sound and Master the overall volume. Neither Katana 50 has a Presence knob, so on a 50 the top end is the Treble's job.

Boss Katana effects for Come As You Are

Booster
OffThe riff is clean: the Boss DS-1 on the record comes in only for the louder sections.Leave it out.
Mod
ChorusStands in for the Small Clone chorus, which makes the watery sound of the riff.Green in bank A on a MkII as shipped. Knob past the middle: BOSS's manual says the knob adjusts the depth of the effect, and depth is what this riff needs.
Reverb
Plate ReverbThe room in the starting point.Green on a MkII as shipped. Knob about 3.

The Katana runs five effects at once, one each on Booster, Mod, FX, Delay and Reverb. Each button cycles green, red and orange, and each colour holds its own effect. The colours below are the ones BOSS's MkII manual lists from the factory. On a Gen 3 the factory effects differ from channel to channel, so check what a colour holds before you rely on it; BOSS Tone Studio, over USB, can change any of them.

Does it sound off on your Katana?

Pick what you hear. You get the knobs to turn on the Katana from the settings above, and how far.

What the Katana cannot do for Come As You Are

The Katana's Chorus is BOSS's own, so the wobble is close to the Small Clone's rather than the same. The louder sections on the record add a Boss DS-1: store a second sound on CH2 with the Booster's Distortion, which is orange in bank A on a MkII as shipped, and the Gain raised to about 4. The record is also tuned a whole step down, to D standard, so the riff sounds higher in standard tuning whatever the amp does.

How to store it on the Katana

Hold CH1 or CH2 for one second. It stores every knob and button except Master, so use Volume to balance stored sounds and Master for the room.

What Nirvana used on Come As You Are

A Fender offset guitar through an Electro-Harmonix Small Clone chorus, most likely into a Vox AC30 for the clean parts, with a Boss DS-1 for the louder sections.

Rig sources: Wikipedia: Come as You Are, Guitar.com: the gear Kurt Cobain used on Nevermind

Boss Katana facts checked against BOSS's own documents on : BOSS: KATANA Mk II Owner's Manual (PDF), BOSS: KATANA Gen 3 Reference Manual (PDF)

Nirvana's rig and the generic five-knob settings for the Come As You Are tone →

A different guitar, or pedals in front?

This page sets the Katana on its own. Name your guitar and your pedals in the tone matcher and Tonelify rewrites the settings for that whole rig, pickup position included. A first plan starts with 7 days free, $0 that day.

Match Come As You Are to my rig

Come As You Are on the Katana: questions

What Boss Katana settings do you need for Come As You Are?

Select the Clean amp type and start at Gain 2, Bass 6, Middle 4, Treble 6 and Reverb about 3. On a Katana 100, set Presence to 5. These are Tonelify's starting points for the Katana, written from the documented rig and BOSS's manual. They are not BOSS's numbers and not the settings on the record.

Which Boss Katana amp type is closest to the amp on Come As You Are?

Clean. The riff is a Fender offset guitar through an Electro-Harmonix Small Clone chorus, most likely into a Vox AC30 kept clean. BOSS names no real amp behind the Katana's types, so there is no AC30 to pick. Use Clean, which BOSS describes as a clean and natural sound, and let the Chorus in the Mod section make the watery wobble that is this riff.

Which Boss Katana effects does Come As You Are use?

Mod: Chorus. Stands in for the Small Clone chorus, which makes the watery sound of the riff. Reverb: Plate Reverb. The room in the starting point.

What can the Katana not do for Come As You Are?

The Katana's Chorus is BOSS's own, so the wobble is close to the Small Clone's rather than the same. The louder sections on the record add a Boss DS-1: store a second sound on CH2 with the Booster's Distortion, which is orange in bank A on a MkII as shipped, and the Gain raised to about 4. The record is also tuned a whole step down, to D standard, so the riff sounds higher in standard tuning whatever the amp does.

Does it matter for Come As You Are that the Katana 50 has no Presence knob?

Not much. Neither the Katana 50 MkII nor the Katana 50 Gen 3 has a Presence knob, so the Treble at 6 sets the top end on its own. On a Katana 100, which has the knob, set Presence to 5.

Is there a Come As You Are patch for the Boss Katana?

Tonelify does not offer a patch file. The settings on this page are dialled in by hand, which takes a couple of minutes and needs no computer. Hold a channel button for one second to store them.

What if you have a different guitar or pedals in front of the Katana?

These settings assume the unit on its own. Tonelify's matcher rewrites them for the guitar, pedals and amp you name, pickup position included. A first plan starts with 7 days free, and nothing is charged that day.

More for the Katana