Boss Katana 50 MkII settings
BOSS's 50-watt Katana from 2019, the generation before Gen 3: five amp types, each with a second voicing on the Variation button, five effects at once and four stored sounds. There is no Presence knob, so the top end is the Treble's job.
⚡ Match a tone on this amp- Amp Type
- Variation
- Gain
- Volume
- Bass
- Middle
- Treble
- Booster
- Mod
- FX
- Delay
- Tap
- Reverb
- Master
- Power Control
How do you dial in a specific tone on a Boss Katana 50 MkII?
The Boss Katana 50 MkII is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.
Starting settings on the Boss Katana 50 MkII
Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Boss's numbers: pick the amp type first, then move one control at a time from here.
Clean
Clean amp type, Gain 2 to 3, Bass 5, Middle 5, Treble 6, Reverb about 3. Keep Gain low and set the level with Volume, so the sound stays clear when you strum hard. BOSS notes that Clean can carry a solo or lead with the Booster switched in. As shipped, the Reverb's green colour in bank A is a Plate Reverb and its red a Spring Reverb, and the Mod's green is a Chorus.
- Gain 2 to 3
- Bass 5
- Middle 5
- Treble 6
- Reverb about 3
Edge of breakup and blues
Crunch amp type, Gain 3 to 4, Bass 5, Middle 6 to 7, Treble 5 to 6, Reverb about 3. BOSS describes Crunch as a fat crunch that faithfully responds to the nuances of your picking, so dig in for grit and play lighter to clean up. For more push, the Booster's green colour in bank A is a Blues Drive as shipped: keep its knob low so it thickens the sound rather than taking it over.
- Gain 3 to 4
- Bass 5
- Middle 6 to 7
- Treble 5 to 6
- Reverb about 3
Classic rock
Crunch amp type, Gain 5 to 6, Bass 5, Middle 6 to 7, Treble 6, Reverb about 2. Keep the mids up: classic rock sits in the midrange, and scooping it is the usual reason a rock tone sounds thin next to a band. For a solo, switch in the Booster rather than raising Gain, so the rhythm sound stays where it was: as shipped, its red colour in bank A is an Overdrive.
- Gain 5 to 6
- Bass 5
- Middle 6 to 7
- Treble 6
- Reverb about 2
Metal
Lead or Brown amp type, Gain 6 to 7, Bass 5 to 6, Middle 5, Treble 6 to 7, Reverb 1 or off. BOSS describes Lead as covering crunch to high gain depending on the Gain setting, and Brown as a lead sound with an edge inherited from the BOSS Waza brown sound. For tighter palm mutes, add a boost before adding Gain: in bank B the Booster holds Clean Boost, Mid Boost and Treble Boost on green, red and orange as shipped. Try Mid Boost with the amp's Gain a step lower. With no Presence knob on the 50, take fizz out with Gain first and Treble second.
- Gain 6 to 7
- Bass 5 to 6
- Middle 5
- Treble 6 to 7
- Reverb 1 or off
Add a boost from the Booster section before you raise the Gain.
Lead
Take the rhythm sound you already have, raise Middle by one step, add Delay and a little Reverb, and store it on CH2 so the solo is one button away. Press Tap two or more times in time with the song to set the delay time. Delay shares its knob with FX: Delay is the inner ring, FX the outer. As shipped, bank A's Delay is a Digital Delay on green, an Analog Delay on red and a Tape Echo on orange.
Acoustic guitar
Acoustic amp type, which BOSS describes as a dedicated acoustic guitar amp; its launch announcement adds that the voices are optimised for acoustic-electric guitar. Start with Gain low, Bass, Middle and Treble at 5 and Reverb about 3, with the Booster off, and take Bass down a step if the body of the guitar booms.
Chasing one song? Name it and the matcher writes that song's settings for the Boss Katana 50 MkII.
Songs set up on the Boss Katana 50 MkII
Each page gives the amp type to select for that song, the knob positions and the effects to use, and says what the Katana cannot do for it.
- Master of PuppetsMetallicaLead
- Hotel CaliforniaEaglesCrunch
- Enter SandmanMetallicaLead
- Comfortably NumbPink FloydCrunch
- Money for NothingDire StraitsCrunch
- Smells Like Teen SpiritNirvanaCrunch
- Sweet Child O' MineGuns N' RosesCrunch
- Sultans of SwingDire StraitsClean
- Nothing Else MattersMetallicaClean
- EverlongFoo FightersCrunch
- Welcome To The JungleGuns N' RosesCrunch
- November RainGuns N' RosesCrunch
- Cowboys from HellPanteraLead
- FloodsPanteraBrown
- Purple HazeJimi HendrixCrunch
- Cherub RockThe Smashing PumpkinsCrunch
- Come As You AreNirvanaClean
- The TrooperIron MaidenLead
Boss Katana 50 MkII effects as shipped
Each effect button cycles green, red and orange, and each colour holds its own effect, with a different set in bank A and bank B. These are the effects BOSS's manual lists on each colour from the factory. BOSS Tone Studio, over USB, can swap in any of more than 60 effect types and change the order of the effects. A factory reset puts these back, along with every other setting: hold Panel while you switch the amp on.
| Knob and bank | Green | Red | Orange |
|---|---|---|---|
| Booster, bank A | Blues Drive | Overdrive | Distortion |
| Booster, bank B | Clean Boost | Mid Boost | Treble Boost |
| Mod, bank A | Chorus | Phaser 90E | Flanger 117E |
| Mod, bank B | DC-30 | Comp | Limiter |
| FX, bank A | Tremolo | T.Wah | Heavy Octave |
| FX, bank B | Phaser 90E | Flanger 117E | Pitch Shifter |
| Delay, bank A | Digital Delay | Analog Delay | Tape Echo |
| Delay, bank B | SDE-3000 | Digital Delay | Modulate |
| Reverb, bank A | Plate Reverb | Spring Reverb | Hall Reverb |
| Reverb, bank B | Plate Reverb | Plate Reverb | Hall Reverb |
What controls does the Boss Katana 50 MkII have?
The Boss Katana 50 MkII has 15 controls on its front panel: Amp Type switch, Variation button, Gain, Volume, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Master and Power Control switch.
Boss Katana 50 MkII specifications
- Power
- 50W, with 25W and 0.5W settings
- Speaker
- 1x12" custom
- Voicings
- Acoustic, Clean, Crunch, Lead, Brown
- Front panel
- Amp Type switch, Variation button, Gain, Volume, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Master, Power Control switch
- Released
- 2019
What the Boss Katana 50 MkII panel means when you dial it in
50W, with 25W and 0.5W settings through a 1x12" custom. There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. Reverb is onboard, so a tone that needs it does not need a pedal in the chain. The selectable voicings are Acoustic, Clean, Crunch, Lead and Brown. Picking the voicing comes before the knob positions, because the same numbers land somewhere else on each one.
Boss Katana 50 MkII questions
Does the Katana 50 MkII have a presence knob?
No. BOSS's MkII manual says the Katana-50 MkII has no Presence knob, no Cab Resonance switch and no CH3 or CH4 buttons. Presence is on the 100-watt MkII models, so on the 50 the top end comes from the Treble control alone.
What is the difference between the Katana 50 MkII and the Katana 100 MkII?
Power and connections. Both have one custom 12-inch speaker, the same five amp types with Variation and the same five effects at once. The 100 adds a Presence knob, CH3 and CH4 for eight stored sounds instead of four, an effects loop, a Line Out, Stereo Expand for linking two amps and a jack for the GA-FC foot controller. Its Power Control reads 0.5 W, 50 W and 100 W, where the 50's reads 0.5 W, 25 W and 50 W.
How do you save a sound on the Katana 50 MkII?
Hold CH1 or CH2 for one second: it stores every knob and button except Master, which is why Volume is the control for balancing sounds and Master the one for the room. The 50 holds four sounds, CH1 and CH2 in bank A and in bank B. To change bank, hold Panel for about a second while a channel is selected. Panel on its own plays whatever the knobs are set to now.
Does the Katana 50 MkII have an effects loop?
No. BOSS's manual lists the Send and Return jacks on the 100-watt MkII models only. On the 50, pedals go into the Input. A preamp, or a multi-effects unit with its own amp models, can go into Power Amp In instead, which feeds the power amp directly.
How do you use Power Amp In on the Katana 50 MkII?
Plug the output of a preamp or a modeller into Power Amp In. The signal skips the Katana's preamp, so only Master and Power Control change it, and the Panel button lights green while it is in use. Input and Power Amp In do not work together: with cables in both, Input wins. BOSS Tone Studio can set a high-pass filter and the gain for this input.
What does the Power Control switch do on the Katana 50 MkII?
It sets the output of the power amp for where you are playing: 0.5 W, 25 W or 50 W. Standby mutes the amp with the power on and every setting left where it was, which BOSS suggests for the gap between sets. At home, use a lower Power Control setting rather than turning Master almost to zero.
Can you use headphones with the Katana 50 MkII?
Yes, from the Phones/Rec Out jack. BOSS says it gives the sound as if you were playing through the speaker, and the speaker goes quiet while a plug is in. Set the level with Volume and Master. The USB port records the amp into a computer once BOSS's driver is installed.
Which footswitch works with the Katana 50 MkII?
A latch-type BOSS footswitch in the jack marked SEL CH1 CH2/EXP PEDAL: its tip switches CH1 and CH2 and its ring switches bank A and B. The manual names the FS-5L, FS-6 and FS-7, with an FS-6 or FS-7 set to FS-5L latch mode. Momentary switches such as the FS-5U do not work. An expression pedal in the same jack sets the volume. The GA-FC foot controller is for the 100-watt models.
What are the best Katana 50 MkII settings for metal?
Start with the Lead or Brown amp type, Gain 6 to 7, Bass 5 to 6, Middle around 5, Treble 6 to 7 and Reverb 1 or off, with Mid Boost from the Booster in front rather than Gain at 10. These are starting points, not BOSS's numbers: move one control at a time from here. If it fizzes, lower Gain first and Treble second, since the 50 has no Presence knob.
When did the Boss Katana 50 MkII come out?
BOSS announced the Katana MkII range, the 50, the 100, the 100/212 and the Head, on 3 October 2019 as the next generation of the original Katana series. The Katana 50 Gen 3 followed in May 2024.
Does Tonelify support the Boss Katana 50 MkII?
Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Amp Type switch, Variation button, Gain, Volume, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Master, Power Control switch. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
More Boss gear
Similar amps from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for the controls the Boss Katana 50 MkII has. A first plan starts with 7 days free, $0 today.