Tonelify
Black Friday40% off yearly
Guitar ampModelling combo

Boss Katana 100 MkII settings

The 100-watt Katana MkII combo: the 50's panel plus a Presence knob, eight stored sounds instead of four, an effects loop, a Line Out and Stereo Expand for running two amps.

⚡ Match a tone on this amp
Front panel16 controls
  • Amp Type knob
  • Variation
  • Gain
  • Volume
  • Bass
  • Middle
  • Treble
  • Booster
  • Mod
  • FX
  • Delay
  • Tap
  • Reverb
  • Presence
  • Master
  • Power Control
VoicingsAcousticCleanCrunchLeadBrown
The controls on the Boss Katana 100 MkII, drawn in a row rather than in the real panel layout. The list comes from Boss's own documentation.

How do you dial in a specific tone on a Boss Katana 100 MkII?

The Boss Katana 100 MkII is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.

Starting settings on the Boss Katana 100 MkII

Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Boss's numbers: pick the amp type first, then move one control at a time from here.

Clean

Clean amp type, Gain 2 to 3, Bass 5, Middle 5, Treble 6, Presence 4 to 5, Reverb about 3. Keep Gain low and set the level with Volume, so the sound stays clear when you strum hard. BOSS notes that Clean can carry a solo or lead with the Booster switched in. As shipped, the Reverb's green colour in bank A is a Plate Reverb and its red a Spring Reverb, and the Mod's green is a Chorus.

Clean amp typeKatana 100 MkII clean
  • Gain 2 to 3
  • Bass 5
  • Middle 5
  • Treble 6
  • Presence 4 to 5
  • Reverb about 3

Edge of breakup and blues

Crunch amp type, Gain 3 to 4, Bass 5, Middle 6 to 7, Treble 5 to 6, Presence 5, Reverb about 3. BOSS describes Crunch as a fat crunch that faithfully responds to the nuances of your picking, so dig in for grit and play lighter to clean up. For more push, the Booster's green colour in bank A is a Blues Drive as shipped: keep its knob low so it thickens the sound rather than taking it over.

Crunch amp typeKatana 100 MkII blues
  • Gain 3 to 4
  • Bass 5
  • Middle 6 to 7
  • Treble 5 to 6
  • Presence 5
  • Reverb about 3

Classic rock

Crunch amp type, Gain 5 to 6, Bass 5, Middle 6 to 7, Treble 6, Presence 5, Reverb about 2. Keep the mids up: classic rock sits in the midrange, and scooping it is the usual reason a rock tone sounds thin next to a band. For a solo, switch in the Booster rather than raising Gain, so the rhythm sound stays where it was: as shipped, its red colour in bank A is an Overdrive.

Crunch amp typeKatana 100 MkII classic rock
  • Gain 5 to 6
  • Bass 5
  • Middle 6 to 7
  • Treble 6
  • Presence 5
  • Reverb about 2

Metal

Lead or Brown amp type, Gain 6 to 7, Bass 5 to 6, Middle 5, Treble 6 to 7, Presence 5 to 6, Reverb 1 or off. BOSS describes Lead as covering crunch to high gain depending on the Gain setting, and Brown as a lead sound with an edge inherited from the BOSS Waza brown sound. For tighter palm mutes, add a boost before adding Gain: in bank B the Booster holds Clean Boost, Mid Boost and Treble Boost on green, red and orange as shipped. Try Mid Boost with the amp's Gain a step lower. If it fizzes, lower Gain first, then Presence, then Treble.

Lead or Brown amp typeKatana 100 MkII metal
  • Gain 6 to 7
  • Bass 5 to 6
  • Middle 5
  • Treble 6 to 7
  • Presence 5 to 6
  • Reverb 1 or off

Add a boost from the Booster section before you raise the Gain.

Lead

Take the rhythm sound you already have, raise Middle by one step, add Delay and a little Reverb, and store it on a channel of its own so the solo is one button away. Press Tap two or more times in time with the song to set the delay time. Delay shares its knob with FX: Delay is the inner ring, FX the outer. As shipped, bank A's Delay is a Digital Delay on green, an Analog Delay on red and a Tape Echo on orange.

Acoustic guitar

Acoustic amp type, which BOSS describes as a dedicated acoustic guitar amp; its launch announcement adds that the voices are optimised for acoustic-electric guitar. Start with Gain low, Bass, Middle and Treble at 5 and Reverb about 3, with the Booster off, and take Bass down a step if the body of the guitar booms.

Chasing one song? Name it and the matcher writes that song's settings for the Boss Katana 100 MkII.

Match a song to this amp7 days free, $0 today

Songs set up on the Boss Katana 100 MkII

Each page gives the amp type to select for that song, the knob positions and the effects to use, and says what the Katana cannot do for it.

Boss Katana 100 MkII effects as shipped

Each effect button cycles green, red and orange, and each colour holds its own effect, with a different set in bank A and bank B. These are the effects BOSS's manual lists on each colour from the factory. BOSS Tone Studio, over USB, can swap in any of more than 60 effect types and change the order of the effects. A factory reset puts these back, along with every other setting: hold Panel while you switch the amp on.

From BOSS's KATANA Mk II Owner's Manual, page 10. The knob sets the depth of whichever colour is lit.
Knob and bankGreenRedOrange
Booster, bank ABlues DriveOverdriveDistortion
Booster, bank BClean BoostMid BoostTreble Boost
Mod, bank AChorusPhaser 90EFlanger 117E
Mod, bank BDC-30CompLimiter
FX, bank ATremoloT.WahHeavy Octave
FX, bank BPhaser 90EFlanger 117EPitch Shifter
Delay, bank ADigital DelayAnalog DelayTape Echo
Delay, bank BSDE-3000Digital DelayModulate
Reverb, bank APlate ReverbSpring ReverbHall Reverb
Reverb, bank BPlate ReverbPlate ReverbHall Reverb

What controls does the Boss Katana 100 MkII have?

The Boss Katana 100 MkII has 16 controls on its front panel: Amp Type knob, Variation button, Gain, Volume, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Presence, Master and Power Control switch.

Boss Katana 100 MkII specifications

Power
100W, with 50W and 0.5W settings
Speaker
1x12" custom
Voicings
Acoustic, Clean, Crunch, Lead, Brown
Front panel
Amp Type knob, Variation button, Gain, Volume, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Presence, Master, Power Control switch
Released
2019

What the Boss Katana 100 MkII panel means when you dial it in

100W, with 50W and 0.5W settings through a 1x12" custom. There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. It has a presence control, so the top end above the treble band is set separately from the tone stack. That is the control to reach for when a setting sounds close but harsh. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. Reverb is onboard, so a tone that needs it does not need a pedal in the chain. The selectable voicings are Acoustic, Clean, Crunch, Lead and Brown. Picking the voicing comes before the knob positions, because the same numbers land somewhere else on each one.

Boss Katana 100 MkII questions

What does the Presence knob do on the Katana 100 MkII?

BOSS's manual says it adds a lustrous outline to the mid and high range, which helps when the sound needs more definition. On a high-gain sound that fizzes, lower Gain first, then Presence, then Treble. The Katana 50 MkII has no Presence knob, so on a 50 the top end is the Treble's job alone.

What is the difference between the Katana 100 MkII and the Katana 50 MkII?

Power and connections. Both have one custom 12-inch speaker, the same five amp types with Variation and the same five effects at once. The 100 adds the Presence knob, CH3 and CH4 for eight stored sounds instead of four, an effects loop, a Line Out, Stereo Expand and a jack for the GA-FC foot controller. Its Power Control reads 0.5 W, 50 W and 100 W, where the 50's reads 0.5 W, 25 W and 50 W.

How do you save a sound on the Katana 100 MkII?

Hold CH1, CH2, CH3 or CH4 for one second: it stores every knob and button except Master, which is why Volume is the control for balancing sounds and Master the one for the room. The 100 holds eight sounds, four channels in bank A and four in bank B. To change bank, hold Panel for about a second while a channel is selected; with bank B selected, the Panel button blinks slowly.

Does the Katana 100 MkII have an effects loop?

Yes, a mono one on the back. Connect Send to the input of your effect and the effect's output to Return. BOSS lists the loop on the 100, 100/212, Head and Artist MkII; the Katana 50 MkII has none.

How do you use the Line Out on the Katana 100 MkII?

Connect it to a PA or a recorder: BOSS says it gives the amp's sound as if you were playing through the speaker. Set its level with Volume, because Master does not affect the Line Out. That also means you can turn Master down and feed the PA with the amp itself silent.

Can you link two Katana 100 MkII amps in stereo?

Yes, with Stereo Expand. Run a cable from the Line Out of the amp your guitar is plugged into to the Power Amp In of the second amp, and switch Stereo Expand on at both. Only the second amp's Master and Power Control still work. BOSS's launch announcement says stereo effects such as chorus, delay and reverb then spread across both amps.

What does the Power Control switch do on the Katana 100 MkII?

It sets the output of the power amp for where you are playing: 0.5 W, 50 W or 100 W. Standby mutes the amp with the power on and every setting left where it was, which BOSS suggests for the gap between sets. At home, use a lower Power Control setting rather than turning Master almost to zero.

Which footswitch works with the Katana 100 MkII?

The BOSS GA-FC, in its own jack, switches CH1 to CH4 and Panel and turns the five effects on and off. A latch-type FS-5L, FS-6 or FS-7 in the jack marked SEL CH1 CH2/EXP PEDAL switches CH1 and CH2 and the banks instead, with an FS-6 or FS-7 set to FS-5L latch mode, and an expression pedal there sets the volume. Momentary switches such as the FS-5U do not work.

What are the best Katana 100 MkII settings for metal?

Start with the Lead or Brown amp type, Gain 6 to 7, Bass 5 to 6, Middle around 5, Treble 6 to 7, Presence 5 to 6 and Reverb 1 or off, with Mid Boost from the Booster in front rather than Gain at 10. These are starting points, not BOSS's numbers: move one control at a time from here. If it fizzes, lower Gain first, then Presence, then Treble.

When did the Boss Katana 100 MkII come out?

BOSS announced the Katana MkII range, the 50, the 100, the 100/212 and the Head, on 3 October 2019 as the next generation of the original Katana series, with the 100-watt models adding Stereo Expand.

Does Tonelify support the Boss Katana 100 MkII?

Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Amp Type knob, Variation button, Gain, Volume, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Presence, Master, Power Control switch. You will not be told to set a knob that is not there.

Sources

Panel, specifications and dates checked against these on .

More Boss gear

Similar amps from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for the controls the Boss Katana 100 MkII has. A first plan starts with 7 days free, $0 today.