Forty Six & 2
A riff in D Phrygian dominant that moves between bars of 4/4 and 7/8.
What is the Forty Six & 2 guitar tone?
The Forty Six & 2 guitar tone is a riff in D Phrygian dominant that moves between bars of 4/4 and 7/8, heard on Tool's 1990s prog metal recording. It is a distorted riff tone, and Tool reportedly tracked it with Andertons' Sound Like feature says Adam Jones first used a multi-amp rig on Ænima, adding a Mesa/Boogie Dual Rectifier and a Diezel VH4 to the modified mid-1970s Marshall Super Bass 100 he had used since the beginning, with the VH4 adding a richer low-end growl and the Dual Rectifier more gain and top-end fizz, and that his tone is noticeably heavier on this album; the same feature says Jones and bassist Justin Chancellor used more effects pedals on Ænima and names Forty Six & 2 and Pushit as the tracks that show the change; Jones told Guitar World he has always played with two or three amps, one for high end, one good with midrange and one that kicks in with the low, because he does not believe one amp has the perfect sound; Andertons calls his 1979 Les Paul Custom, a Norlin-era Silverburst, his number one guitar, unmodified apart from a Seymour Duncan JB at the bridge, though no source read here places a guitar on this song; Wikipedia says he used an epilator as a plectrum on Ænima and Lateralus; the song is mostly in 4/4 with sections of 7/8, Danny Carey playing four bars of 7/8 on the ride over the band's 4/4 in the intro until all meet on the fifth bar, and most of it is in D Phrygian dominant; Ænima, the first Tool album with Chancellor, was produced by the band and David Bottrill at Ocean Way Recording in Hollywood and The Hook in North Hollywood and released on vinyl on 17 September 1996 and on CD on 1 October, with Forty Six & 2 one of its promotional singles; Rolling Stone placed it at number 53 of its 100 greatest heavy metal songs in March 2023. Progressive metal riffs change meter constantly and sit tight against the bass, so a moderate, mid-forward gain that keeps every note distinct gets closer than a saturated, scooped sound.
You do not need that exact gear to land in the same place. What carries this sound is the gain structure, the EQ curve, the pickup choice and the order of the effects, and all four can be rebuilt on equipment that costs a fraction of the original. The numbers change from amp to amp, because a high-gain head and a small practice amp reach the same voicing from different knob positions. That translation is what Tonelify works out for the rig you actually own.
Forty Six & 2 amp settings: a starting point
On a generic five-knob amp, start at Gain 6, Bass 5, Middle 6, Treble 6, Presence 5, Reverb 2, with the bridge pickup.
- Gain 6
- Bass 5
- Middle 6
- Treble 6
- Presence 5
- Reverb 2
- Signal chain
- Two or three amps blended (Marshall bass head, Dual Rectifier, Diezel VH4 on the album, per Andertons) → More effects pedals than on Undertow
- The control that matters most
- The blend, not the gain knob. Jones splits his sound across amps, one for the high end, one for the midrange and one for the low, so on a single amp keep the middle up and the bass full, and set the gain where each note of the riff still reads when the band moves into 7/8.
These positions are free and they are a starting point. A Katana, a Spark and a valve head reach this voicing from different knob positions, so Tonelify rewrites every value above for the amp and guitar you own. A first plan starts with 7 days free, $0 today.
Adapt these to my amp- Pickup
- Bridge pickup
These are positions on a generic five-knob amp with gain, bass, middle, treble and presence, each running 0 to 10. They are a starting point, not the settings used on the record, and they will not transfer unchanged to an amp with a different gain structure or EQ voicing. If you tell Tonelify which amp you own, it rewrites every value above for the controls that amp actually has.
Does the Forty Six & 2 tone sound off on your amp?
Pick what you hear. You get the knobs to turn from the starting point above, and how far.
What gear did Tool use on Forty Six & 2?
Andertons' Sound Like feature says Adam Jones first used a multi-amp rig on Ænima, adding a Mesa/Boogie Dual Rectifier and a Diezel VH4 to the modified mid-1970s Marshall Super Bass 100 he had used since the beginning, with the VH4 adding a richer low-end growl and the Dual Rectifier more gain and top-end fizz, and that his tone is noticeably heavier on this album; the same feature says Jones and bassist Justin Chancellor used more effects pedals on Ænima and names Forty Six & 2 and Pushit as the tracks that show the change; Jones told Guitar World he has always played with two or three amps, one for high end, one good with midrange and one that kicks in with the low, because he does not believe one amp has the perfect sound; Andertons calls his 1979 Les Paul Custom, a Norlin-era Silverburst, his number one guitar, unmodified apart from a Seymour Duncan JB at the bridge, though no source read here places a guitar on this song; Wikipedia says he used an epilator as a plectrum on Ænima and Lateralus; the song is mostly in 4/4 with sections of 7/8, Danny Carey playing four bars of 7/8 on the ride over the band's 4/4 in the intro until all meet on the fifth bar, and most of it is in D Phrygian dominant; Ænima, the first Tool album with Chancellor, was produced by the band and David Bottrill at Ocean Way Recording in Hollywood and The Hook in North Hollywood and released on vinyl on 17 September 1996 and on CD on 1 October, with Forty Six & 2 one of its promotional singles; Rolling Stone placed it at number 53 of its 100 greatest heavy metal songs in March 2023.
Sources: Andertons: Sound Like Tool, Guitar World: Dear Guitar Hero, Adam Jones of Tool, Wikipedia: Forty Six & 2, Wikipedia: Ænima, Wikipedia: Adam Jones (musician)
Tonelify's tone matcher reads that chain and translates it to the amp and guitar you already own, returning gain, bass, mids, treble and presence values along with a pickup position.
How do you get the Forty Six & 2 tone on your own amp?
Tell us your guitar, amp, and pedals
AI researches the original tone of Forty Six & 2
Get exact knob settings adapted to your rig
Forty Six & 2 tone questions
What amp settings do you need for Forty Six & 2?
On a generic five-knob amp, start at Gain 6, Bass 5, Middle 6, Treble 6, Presence 5, Reverb 2, with the bridge pickup. These are positions on a generic five-knob amp with gain, bass, middle, treble and presence, each running 0 to 10. They are a starting point, not the settings used on the record, and they will not transfer unchanged to an amp with a different gain structure or EQ voicing. Tonelify rewrites the same values for the specific amp and guitar you own, because a high-gain head and a small solid-state combo reach the same riff in D Phrygian dominant that moves between bars of 4/4 and 7/8 from different positions.
What amp did Adam Jones use on Forty Six & 2?
Amp: Album era (a modified Marshall Super Bass, with a Mesa/Boogie Dual Rectifier and a Diezel VH4 added, by Andertons' account). Guitar: Not placed on the song (his number one guitar: a 1979 Gibson Les Paul Custom in Silverburst). Sources: Andertons, Guitar World and Wikipedia.
What were Adam Jones' amp settings on Forty Six & 2?
None of the sources cited on this page gives Adam Jones' full amp settings on Forty Six & 2. The numbers here are a starting point for that kind of part, not the settings from the session, and Tonelify rewrites them for the amp and guitar you own.
How do you get Adam Jones' tone on Forty Six & 2?
The blend, not the gain knob. Jones splits his sound across amps, one for the high end, one for the midrange and one for the low, so on a single amp keep the middle up and the bass full, and set the gain where each note of the riff still reads when the band moves into 7/8. Play it with the bridge pickup.
Can you get the Forty Six & 2 tone without the original gear?
Yes. The parts that define the sound are the gain structure, the EQ curve, the pickup position and the effects order, and those translate to other equipment. Tonelify's adaptation step works them out for the amp and guitar you own.
Does Tonelify cost anything to try?
A match for your own gear takes a plan, and a first plan starts with 7 days free with nothing charged that day: Stage is $6.99 a month for 20 matches, Headliner is $10.99 a month for unlimited matching within a fair use limit of 150 new matches a day, and yearly billing works out cheaper on both. Reading this page and the rest of the library costs nothing and needs no account.