Let It Happen
Tame Impala
An eight-minute synth-led groove with fuzzy guitar riffs under the keyboards.
What is the Let It Happen guitar tone?
The Let It Happen guitar tone is an eight-minute synth-led groove with fuzzy guitar riffs under the keyboards, heard on Tame Impala's 2010s psychedelic rock recording. It is a distorted riff tone, and Tame Impala reportedly tracked it with No guitar or amp that any source read here places on this song; Kevin Parker wrote, played, produced and mixed it himself, as he did all of Currents, which Wikipedia says he recorded mostly at his home studio in Fremantle, Western Australia, a two-room setup described as a ramshackle drum kit, a guitar covered in duct tape and some battered vintage synths, using the Roland Juno-106 and Sequential Circuits Pro-One from Lonerism plus a Roland JV-1080 module and a Sequential Circuits Drumtraks, recorded in Ableton Live; Wikipedia says guitars are on every song on the album but accompany and answer the other instruments, partly because his guitars and pedals were often shipped ahead on tour while his synths stayed at home; Mixdown says a Vox AC30 has long been his amp, that many of Currents' synth sounds came from a Squier J Mascis Jazzmaster fitted with a Roland synth pickup, and that an Electro-Harmonix Holy Grail reverb can be heard on almost every track on the album; Parker told Grantland that he does not see the difference between a guitar and a synth, that it is usually whatever was closest when he thought of the song, and that after the top end of Lonerism, with its sizzling guitar and synths, he wanted an album you could turn up loud with a throbbing rhythm; he said the song came together on tour, the start walking to a hotel room in Oklahoma, the chorus at a festival in Hungary or Turkey and the jam section on a laptop on a train in France, with a section that skips like a scratched CD and closing vocals sung through a keyboard sampler; Time heard robot voices give way to fuzzy guitar riffs, and when Tame Impala played it at Coachella, months before the album was out, Parker put his guitar down for the whole song, Relix says; it was the lead single from Currents, released on 10 March 2015, and runs nearly eight minutes. The snarl comes from a fuzz circuit interacting with a cranked amp, which is why fuzz into a clean channel rarely gets there on its own.
You do not need that exact gear to land in the same place. What carries this sound is the gain structure, the EQ curve, the pickup choice and the order of the effects, and all four can be rebuilt on equipment that costs a fraction of the original. The numbers change from amp to amp, because a high-gain head and a small practice amp reach the same voicing from different knob positions. That translation is what Tonelify works out for the rig you actually own.
Let It Happen amp settings: a starting point
On a generic five-knob amp, start at Gain 6, Bass 6, Middle 6, Treble 5, Presence 5, Reverb 3, with the bridge pickup.
- Gain 6
- Bass 6
- Middle 6
- Treble 5
- Presence 5
- Reverb 3
- Signal chain
- Fuzz on the guitar riffs → Electro-Harmonix Holy Grail reverb (album era, per Mixdown)
- The control that matters most
- Keep the guitar under the keyboards. Parker built Currents around a loud, throbbing low end rather than the sizzling guitars of Lonerism, and Time heard fuzzy guitar riffs coming out of the synths, so use a fuzz with a wide reverb, roll some bass off the guitar and leave the bottom to the bass and drums. Much of the song is synths, so a single amp setting will only cover the guitar parts.
These positions are free and they are a starting point. A Katana, a Spark and a valve head reach this voicing from different knob positions, so Tonelify rewrites every value above for the amp and guitar you own. A first plan starts with 7 days free, $0 today.
Adapt these to my amp- Pickup
- Bridge pickup
These are positions on a generic five-knob amp with gain, bass, middle, treble and presence, each running 0 to 10. They are a starting point, not the settings used on the record, and they will not transfer unchanged to an amp with a different gain structure or EQ voicing. If you tell Tonelify which amp you own, it rewrites every value above for the controls that amp actually has.
Does the Let It Happen tone sound off on your amp?
Pick what you hear. You get the knobs to turn from the starting point above, and how far.
What gear did Tame Impala use on Let It Happen?
No guitar or amp that any source read here places on this song; Kevin Parker wrote, played, produced and mixed it himself, as he did all of Currents, which Wikipedia says he recorded mostly at his home studio in Fremantle, Western Australia, a two-room setup described as a ramshackle drum kit, a guitar covered in duct tape and some battered vintage synths, using the Roland Juno-106 and Sequential Circuits Pro-One from Lonerism plus a Roland JV-1080 module and a Sequential Circuits Drumtraks, recorded in Ableton Live; Wikipedia says guitars are on every song on the album but accompany and answer the other instruments, partly because his guitars and pedals were often shipped ahead on tour while his synths stayed at home; Mixdown says a Vox AC30 has long been his amp, that many of Currents' synth sounds came from a Squier J Mascis Jazzmaster fitted with a Roland synth pickup, and that an Electro-Harmonix Holy Grail reverb can be heard on almost every track on the album; Parker told Grantland that he does not see the difference between a guitar and a synth, that it is usually whatever was closest when he thought of the song, and that after the top end of Lonerism, with its sizzling guitar and synths, he wanted an album you could turn up loud with a throbbing rhythm; he said the song came together on tour, the start walking to a hotel room in Oklahoma, the chorus at a festival in Hungary or Turkey and the jam section on a laptop on a train in France, with a section that skips like a scratched CD and closing vocals sung through a keyboard sampler; Time heard robot voices give way to fuzzy guitar riffs, and when Tame Impala played it at Coachella, months before the album was out, Parker put his guitar down for the whole song, Relix says; it was the lead single from Currents, released on 10 March 2015, and runs nearly eight minutes.
Sources: Grantland: Tame Impala's Currents and Let It Happen, Relix: Tame Impala's eclectic Currents, Mixdown: Gear Rundown, Kevin Parker, Wikipedia: Let It Happen (song), Wikipedia: Currents (Tame Impala album)
Tonelify's tone matcher reads that chain and translates it to the amp and guitar you already own, returning gain, bass, mids, treble and presence values along with a pickup position.
How do you get the Let It Happen tone on your own amp?
Tell us your guitar, amp, and pedals
AI researches the original tone of Let It Happen
Get exact knob settings adapted to your rig
Let It Happen tone questions
What amp settings do you need for Let It Happen?
On a generic five-knob amp, start at Gain 6, Bass 6, Middle 6, Treble 5, Presence 5, Reverb 3, with the bridge pickup. These are positions on a generic five-knob amp with gain, bass, middle, treble and presence, each running 0 to 10. They are a starting point, not the settings used on the record, and they will not transfer unchanged to an amp with a different gain structure or EQ voicing. Tonelify rewrites the same values for the specific amp and guitar you own, because a high-gain head and a small solid-state combo reach the same eight-minute synth-led groove with fuzzy guitar riffs under the keyboards from different positions.
What amp did Kevin Parker use on Let It Happen?
Amp: Not documented for this song (a Vox AC30 is his long-time amp). Guitar: Not documented for this song. Sources: Grantland, Relix, Mixdown and Wikipedia.
What were Kevin Parker's amp settings on Let It Happen?
None of the sources cited on this page gives Kevin Parker's full amp settings on Let It Happen. The numbers here are a starting point for that kind of part, not the settings from the session, and Tonelify rewrites them for the amp and guitar you own.
How do you get Kevin Parker's tone on Let It Happen?
Keep the guitar under the keyboards. Parker built Currents around a loud, throbbing low end rather than the sizzling guitars of Lonerism, and Time heard fuzzy guitar riffs coming out of the synths, so use a fuzz with a wide reverb, roll some bass off the guitar and leave the bottom to the bass and drums. Much of the song is synths, so a single amp setting will only cover the guitar parts. Play it with the bridge pickup.
Can you get the Let It Happen tone without the original gear?
Yes. The parts that define the sound are the gain structure, the EQ curve, the pickup position and the effects order, and those translate to other equipment. Tonelify's adaptation step works them out for the amp and guitar you own.
Does Tonelify cost anything to try?
A match for your own gear takes a plan, and a first plan starts with 7 days free with nothing charged that day: Stage is $6.99 a month for 20 matches, Headliner is $10.99 a month for unlimited matching within a fair use limit of 150 new matches a day, and yearly billing works out cheaper on both. Reading this page and the rest of the library costs nothing and needs no account.