Tonelify
Language: English
Black Friday40% off yearly
Reviewed
DistortedRiffHeavy Metal1970s

Paranoid

Black Sabbath

Fast, driving riff with raw treble-boosted grit.

What is the Paranoid guitar tone?

The Paranoid guitar tone is fast, driving riff with raw treble-boosted grit, heard on Black Sabbath's 1970s heavy metal recording. It is a distorted riff tone, and Black Sabbath reportedly tracked it with Gibson SG through a Dallas Rangemaster treble booster into Laney amps, the same core rig as Iron Man. The bite in this kind of heavy metal comes from a boost or drive pedal pushing a loud amp, so the tone is thick but never smooth, with the mids left in.

You do not need that exact gear to land in the same place. What carries this sound is the gain structure, the EQ curve, the pickup choice and the order of the effects, and all four can be rebuilt on equipment that costs a fraction of the original. The numbers change from amp to amp, because a high-gain head and a small practice amp reach the same voicing from different knob positions. That translation is what Tonelify works out for the rig you actually own.

Paranoid amp settings: a starting point

On a generic five-knob amp, start at Gain 7, Bass 6, Middle 6, Treble 6, Presence 5, Reverb 1, with the neck (rhythm) pickup for the chords, per a 1974 interview.

  • Gain 7
  • Bass 6
  • Middle 6
  • Treble 6
  • Presence 5
  • Reverb 1
Signal chain
Treble booster (Rangemaster style) → Cranked amp
The control that matters most
The treble booster. Early heavy metal got its bite from a booster pushing a loud amp, so a boost in front of moderate gain gets closer than turning the gain knob up.

These positions are free and they are a starting point. A Katana, a Spark and a valve head reach this voicing from different knob positions, so Tonelify rewrites every value above for the amp and guitar you own. A first plan starts with 7 days free, $0 today.

Adapt these to my amp
Pickup
Neck (rhythm) pickup for the chords, per a 1974 interview

These are positions on a generic five-knob amp with gain, bass, middle, treble and presence, each running 0 to 10. They are a starting point, not the settings used on the record, and they will not transfer unchanged to an amp with a different gain structure or EQ voicing. If you tell Tonelify which amp you own, it rewrites every value above for the controls that amp actually has.

Does the Paranoid tone sound off on your amp?

Pick what you hear. You get the knobs to turn from the starting point above, and how far.

Published settings

What amp settings did Tony Iommi use?

Volume, presence, middle and treble on 10 and no bass at all, with the guitar's volume on full, the toggle in the rhythm position for chords and in the treble position for solos. That is how a 1974 Guitar Player interview describes his Laney, and it says he used the same settings in the studio through one 100-watt Laney stack. The article explains the wide-open amp as a way round the different grounding in American venues, which left his Laneys performing below par. The interview came four years after the Paranoid album, so read these as his settings of that era rather than a note from the session.

Source: Guitar Player: Tony Iommi's 1974 interview on the SG and Laney amps

What gear did Black Sabbath use on Paranoid?

Gibson SG through a Dallas Rangemaster treble booster into Laney amps, the same core rig as Iron Man.

Sources: Ground Guitar: Tony Iommi's guitars and gear, Equipboard: Black Sabbath, Paranoid, Guitar Player: Tony Iommi's 1974 interview on the SG and Laney amps

Tony Iommi's amps and guitars on every album →

Tonelify's tone matcher reads that chain and translates it to the amp and guitar you already own, returning gain, bass, mids, treble and presence values along with a pickup position.

How do you get the Paranoid tone on your own amp?

1

Tell us your guitar, amp, and pedals

2

AI researches the original tone of Paranoid

3

Get exact knob settings adapted to your rig

Paranoid tone questions

What amp settings do you need for Paranoid?

On a generic five-knob amp, start at Gain 7, Bass 6, Middle 6, Treble 6, Presence 5, Reverb 1, with the neck (rhythm) pickup for the chords, per a 1974 interview. These are positions on a generic five-knob amp with gain, bass, middle, treble and presence, each running 0 to 10. They are a starting point, not the settings used on the record, and they will not transfer unchanged to an amp with a different gain structure or EQ voicing. Tonelify rewrites the same values for the specific amp and guitar you own, because a high-gain head and a small solid-state combo reach the same fast, driving riff with raw treble-boosted grit from different positions.

What amp did Tony Iommi use on Paranoid?

Amp: Laney head, Rangemaster treble booster. Guitar: Gibson SG. Sources: Ground Guitar, Equipboard and Guitar Player.

How do you get Tony Iommi's tone on Paranoid?

The treble booster. Early heavy metal got its bite from a booster pushing a loud amp, so a boost in front of moderate gain gets closer than turning the gain knob up. Play it with the neck (rhythm) pickup for the chords, per a 1974 interview.

What tuning is Paranoid in?

Standard tuning: E A D G B E, low string to high, according to Ground Guitar.

Source: Ground Guitar: Tony Iommi's guitars and gear

Can you get the Paranoid tone without the original gear?

Yes. The parts that define the sound are the gain structure, the EQ curve, the pickup position and the effects order, and those translate to other equipment. Tonelify's adaptation step works them out for the amp and guitar you own.

Does Tonelify cost anything to try?

A match for your own gear takes a plan, and a first plan starts with 7 days free with nothing charged that day: Stage is $6.99 a month for 20 matches, Headliner is $10.99 a month for unlimited matching within a fair use limit of 150 new matches a day, and yearly billing works out cheaper on both. Reading this page and the rest of the library costs nothing and needs no account.

Related tones

All 5 Black Sabbath tones and their settings →