Ibanez SR300E tone settings
⚡ Match a tone on this gearHow do you dial in a specific tone on a Ibanez SR300E?
Bass tone matching works from the same four things as guitar, the gain structure, the EQ curve, the pickup position and the effects order, but the frequencies that carry the character sit an octave down. Settings for the Ibanez SR300E are written for bass rigs rather than adapted from a guitar answer.
Name the song you are chasing and Tonelify returns the settings for this exact bass guitar, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Ibanez SR300E specifications
- Scale length
- 34"
- Construction
- Okoume body, bolt-on five-piece maple and walnut neck
- Bridge
- Accu-cast B120
- Pickup layout
- HH
- Controls
- Volume, pickup balancer, three-band EQ and a three-way power tap switch
What the Ibanez SR300E panel means when you dial it in
A 34" scale, okoume body, bolt-on five-piece maple and walnut neck. That is the longer of the two common scales, so the strings sit tighter at pitch and the low end stays defined under gain. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. Controls: volume, pickup balancer, three-band EQ and a three-way power tap switch. Accu-cast B120, a fixed anchor, so pitch effects in the original have to come from a pedal or the picking hand. Every setting Tonelify writes for this instrument names the pickup position it was dialled in on, because moving the selector changes both the level hitting the amp and the frequency balance it arrives with.
What pickups does the Ibanez SR300E have?
A HH layout. Pickup output and position change how hard the front of an amp is driven, which is why the same song needs different gain settings on this guitar than on one with the opposite layout. Tonelify accounts for that when it writes the numbers.
Tones to try on a Ibanez SR300E
Ibanez SR300E questions
What amp settings suit a Ibanez SR300E?
The HH layout on this instrument is what decides it. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. That changes the gain setting more than any other control, which is why the same song needs different numbers on this instrument than on one with the opposite layout.
Do I need to change my settings when I switch pickups on the Ibanez SR300E?
Yes. Moving from a neck position to a bridge position changes both the output level hitting the amp and the frequency balance, so a setting dialled in on one pickup rarely holds up on the other. Every set of settings Tonelify returns names the pickup position it was written for.
Does Tonelify support the Ibanez SR300E?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.