PRS Custom 24 tone settings
⚡ Match a tone on this guitar- neckHumbucker
- middleNo pickup
- bridgeHumbucker
How do you dial in a specific tone on a PRS Custom 24?
Pickup output and position decide how hard the front of an amp gets driven, which means the PRS Custom 24 needs different amp settings from a guitar with the opposite layout to land on the same sound. That difference is where most tone-chasing goes wrong: the settings were right, but they were written for someone else's pickups.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact electric guitar, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
PRS Custom 24 pickup switch positions
What each position of the 5-way blade switch turns on, from PRS's operating instructions. The last column is Tonelify's suggestion for each.
| Switch | Pickups on | Tonelify's pick for |
|---|---|---|
| Position 1 (down) | Treble (bridge) pickup | Metal and hard rock rhythm, high gain riffs |
| Position 2 | Treble humbucking pickup and bass single coil | Clean and crunch chords with body |
| Position 3 | Treble and bass humbucking pickups | Full clean, blues rhythm, warm crunch |
| Position 4 | Treble single coil and bass single coil | Funk, bright clean chords, country |
| Position 5 (up) | Bass (neck) pickup | Smooth leads, blues solos, jazz clean |
Tonelify's PRS Custom 24 starting points
Where to start the switch and the two knobs for each style, on a 0 to 10 reading. These are Tonelify's, not PRS's: start here and move one thing at a time.
| Style | Switch | Volume | Tone |
|---|---|---|---|
| Funk clean | Position 4 | 10 | 8 |
| Clean arpeggios | Position 5 | 8 | 7 |
| Blues crunch | Position 3 | 8 | 7 |
| Hard rock rhythm | Position 1 | 10 | 10 |
| Lead | Position 5 | 10 | 8 |
PRS Custom 24 full spec sheet
The specifications PRS lists for the current Custom 24 on its product page.
| Spec | PRS Custom 24 |
|---|---|
| Body | Solidbody, figured maple top, violin carve |
| Back | Mahogany |
| Neck | Mahogany, one-piece, Pattern Thin shape, set into the body |
| Truss rod | PRS Double-Acting |
| Frets | 24, PRS standard fret wire, .104" wide and .047" high |
| Scale length | 25" |
| Fretboard | Rosewood, 10" radius, bird inlays |
| Neck width | 1 11/16" at the nut, 2 1/4" at the body |
| Pickups | PRS DMO treble and bass |
| Controls | Volume and tone, 5-way blade pickup switch |
| Bridge | PRS Patented Tremolo, Gen III |
| Tuners | PRS Phase III locking tuners with wing buttons |
| Finish | High-gloss nitro |
| Strings | PRS Signature 10-46, standard tuning |
| Case | Hardshell case |
PRS Custom 24 vs SE Custom 24
The two share the 25" scale, 24 frets and the bird inlays; PRS lists different woods, pickups, switching and hardware.
| Difference | Custom 24 | SE Custom 24 |
|---|---|---|
| Neck | One-piece mahogany, Pattern Thin | Multi-ply maple, Wide Thin |
| Pickups | DMO | 85/15 "S" |
| Pickup switch | 5-way blade | 3-way blade |
| Single coil sounds | Positions 2 and 4 on the switch | Pull the tone knob up |
| Bridge | PRS Patented Tremolo, Gen III | PRS Patented Tremolo |
| Tuners | Phase III locking | PRS designed, wing buttons |
| Finish | High-gloss nitro | Not listed |
| Case | Hardshell case | Gig bag |
PRS Custom 24 specifications
- Scale length
- 25"
- Construction
- Mahogany back with figured maple top, set mahogany neck
- Bridge
- PRS Gen III tremolo
- Pickup layout
- HH
- Controls
- 5-way blade, master volume, master tone
What the PRS Custom 24 panel means when you dial it in
A 25" scale, mahogany back with figured maple top, set mahogany neck. That sits between the two common scales, 24.75" and 25.5", so the strings hold a little more tension at pitch than on a short scale and a little less than on a long one. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. Controls: 5-way blade, master volume, master tone. PRS Gen III tremolo, so anything in the original that moves the pitch by hand can be played rather than approximated with an effect. Every setting Tonelify writes for this instrument names the pickup position it was dialled in on, because moving the selector changes both the level hitting the amp and the frequency balance it arrives with.
What pickups does the PRS Custom 24 have?
Two humbuckers, one at the neck and one at the bridge. In shorthand that is HH. Pickup output and position change how hard the front of an amp is driven, which is why the same song needs different gain settings on this guitar than on one with the opposite layout. Tonelify accounts for that when it writes the numbers.
PRS Custom 24 questions
What does each position of the PRS Custom 24 5-way switch do?
PRS lists them as: position 1 (down), the treble pickup; position 2, the treble humbucking pickup and the bass single coil; position 3, the treble and bass humbucking pickups; position 4, the treble single coil and the bass single coil; position 5 (up), the bass pickup. The table on this page adds what Tonelify would use each one for.
Which is the bridge pickup on a PRS Custom 24?
PRS calls the bridge pickup the treble pickup and the neck pickup the bass pickup. Its wiring diagram labels them Treble (Bridge) Pickup and Bass (Neck) Pickup, so position 1, down, is the bridge pickup and position 5, up, the neck pickup.
Does the PRS Custom 24 have a coil split?
Yes, on the blade switch rather than a push/pull knob. PRS lists position 2 as the treble humbucking pickup with the bass single coil, and position 4 as the treble single coil with the bass single coil. The knobs are a plain volume and tone.
What is the best Custom 24 switch position for clean?
Tonelify's pick is position 4, the two single coils together, for bright clean chords and funk, or position 2 for a clean with a little more body. Position 5, the bass pickup, suits soft clean arpeggios. PRS gives no settings per style: these picks are Tonelify's.
What is the best Custom 24 switch position for metal and hard rock?
Tonelify's pick is position 1, the treble pickup alone, for high gain rhythm and riffs, and position 5, the bass pickup, for smooth leads. Turn the guitar's volume back a little to clean up a driven amp. These are Tonelify's picks, not PRS's.
What pickups are in the PRS Custom 24?
PRS DMO treble and bass pickups. PRS says DMO stands for Dynamic, Musical, Open, that Paul Reed Smith and PRS's New Products Engineering team designed them, and that they have a wide open sound with vocal character, clear across a wide range of frequencies in each pickup.
What controls does the PRS Custom 24 have?
A volume, a tone and a 5-way blade pickup switch, per PRS's product page. There is no push/pull knob: the single coil sounds are on the switch.
What is the scale length of the PRS Custom 24?
25", with 24 frets, per PRS. The neck is one-piece mahogany in PRS's Pattern Thin shape, set into the body, with a rosewood fretboard of 10" radius and bird inlays. It is 1 11/16" wide at the nut and 2 1/4" at the body.
What strings come on a PRS Custom 24?
PRS lists PRS Signature 10-46 strings in standard tuning, E, A, D, G, B, E, and says the guitar ships in a hardshell case.
What is the difference between the PRS Custom 24 and the SE Custom 24?
PRS's product pages list a mahogany neck, DMO pickups, a 5-way blade switch, the Gen III tremolo, Phase III locking tuners and a nitro finish on the Custom 24, and a maple neck, 85/15 "S" pickups, a 3-way blade switch with a push/pull tone knob, the PRS Patented Tremolo and PRS designed tuners on the SE Custom 24. The comparison table on this page lists them side by side.
When did the PRS Custom 24 come out?
PRS says the Custom 24 was the first model Paul Reed Smith brought to the public, at PRS Guitars' first Winter NAMM show in 1985, and that it has been a top seller ever since.
What tremolo and tuners does the PRS Custom 24 have?
PRS lists the PRS Patented Tremolo, Gen III, and PRS Phase III locking tuners with wing buttons, in nickel hardware. PRS says the Custom 24 is known for its playability, versatility and tuning stability.
What amp settings suit a PRS Custom 24?
The HH layout on this instrument is what decides it. Humbuckers push a hotter, thicker signal into the input, so they reach a given amount of saturation at a lower gain setting. That changes the gain setting more than any other control, which is why the same song needs different numbers on this instrument than on one with the opposite layout.
Do I need to change my settings when I switch pickups on the PRS Custom 24?
Yes. Moving from a neck position to a bridge position changes both the output level hitting the amp and the frequency balance, so a setting dialled in on one pickup rarely holds up on the other. Every set of settings Tonelify returns names the pickup position it was written for.
Does Tonelify support the PRS Custom 24?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
PRS's product pages refused requests from here, so they were read in the Internet Archive's copy of 9 July 2026; the wiring diagram and its operating instructions were read on PRS's support site. The pickup picks and starting points are Tonelify's, not PRS's: PRS gives no settings per style.
More PRS gear
Similar guitars from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the PRS Custom 24 in it. A first plan starts with 7 days free, $0 today.