Sonicake Pocket Master presets and settings
Battery desktop modeller with nine modules, 20 amps, 15 cab IRs and five User IR slots, NAM loading in Clone mode, 100 presets, a looper, drums and USB-C audio, edited in the SONICLINK app.
⚡ Match a tone on this unitHow do you dial in a specific tone on a Sonicake Pocket Master?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the Sonicake Pocket Master name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Starting settings on the Sonicake Pocket Master
Values as the unit's screen shows them, on its own scale; each drawn knob shows that value's share of the range. They are where to begin, not Sonicake's numbers: pick the amp model first, then move one control at a time from here.
Where to start on the Sonicake Pocket Master
Pick the amp and cab first, then set the knobs by ear. The Pocket Master runs nine modules in a chain, NR, FX1, DRV, AMP, IR, EQ, FX2, DLY and RVB, and holds 100 presets, 50 of them factory presets. Its AMP module has 20 models, its IR module 15 cab IRs and five User IR slots, and many amps have Gain, PRES, VOL and a 3-band EQ. Sonicake prints no values for them and no list of the factory presets, so this page gives no numbers: the sections below name the amps, cabs and effects from Sonicake's manual that suit each style.
Clean
Jazz 120, based on the Jazz Chorus solid state combo, with the Jazz 2x12 cab, or Dark Twin, based on the Fender '65 Twin Reverb, with Double 2x12, the Twin's own 2x12. Both have a Bright switch. For chorus, A-Chorus is based on the Arion SCH-1; for space, Spring or Plate 2 in the RVB module. These are Tonelify's picks from Sonicake's manual.
Blues and edge of breakup
TWD Deluxe, based on the Fender Tweed Deluxe, has only Gain, Tone and VOL; try it with TWD-P 1x10 or Viblux 1x12. B-Man N and B-Man B are the Normal and Bright channels of a Fender '59 Bassman. Voks 30N and Voks 30TB are the Normal and TB channels of a VOX AC30HW, and Voks 1x12 is a VOX AC15 cab. To push any of them, put Scream, based on the Ibanez TS-808, or Boost, based on the Xotic EP Booster, in front. These are Tonelify's picks from Sonicake's manual.
Classic rock
Brit 800, based on the Marshall JCM800, or Brit50 JP, a Marshall JTM50 with the Jump connection, with BritGN 4x12, a vintage Marshall 4x12 with Celestion Greenback speakers. Brit 45 is based on a Marshall JTM45, Normal channel. For more drive in front, Dark Mouse is based on the ProCo Rat and Shark on the MI Audio Crunch Box. These are Tonelify's picks from Sonicake's manual.
Metal
Halen51, based on the Peavey 5150 LEAD channel, with Halen 4x12, a Peavey 6505 cab. CalifDualM is a Mesa/Boogie Dual Rectifier in Modern mode, with Dual 4x12, a Rectifier cab. EngPower, Eng120, DizzyVH, Sol100LD and BogXT are based on ENGL, Diezel, Soldano and Bogner heads. Turn on Gate in the NR module, based on the ISP Decimator; its THRE control sets the gate trigger level. These are Tonelify's picks from Sonicake's manual.
Lead
Sol100LD, based on the Soldano SLO100 Overdrive channel, or FlymanB1+, based on a Brown Eye UK-style boutique head, with Sol 4x12. In the DLY module, Analog reproduces a 1980s rack delay and Ping Pong bounces repeats between left and right; Hall or Dream in RVB adds space. These are Tonelify's picks from Sonicake's manual.
Bass and acoustic
For bass, Sonicake gives B-Chorus, tuned for bass players, Bass EQ with bands from 50Hz to 4.5kHz, a Guitar or Bass mode on Touch Wah, and an Auto Wah for guitars and basses. Firmware V1.1.0 added A BassVT and Voks Bass to the AMP module and Bass Drive to DRV. For an acoustic sound from an electric, AC Sim in the FX list has Standard, Jumbo, Enhanced and Piezo modes, with Body and Top controls.
How to edit and save on the Pocket Master
Press the VALUE/VOL knob to open the menu and choose Effects. The two buttons move between modules, and turning or pressing the knob picks and changes parameters; press both buttons together to go back to the main menu. To save a changed preset, press both buttons, choose OK, set the options with the knob, and choose Save. Settings has the Input Level, from -20dB to 20dB, and the USB recording levels.
Chasing one song? Name it and the matcher writes that song's settings for the Sonicake Pocket Master.
Sonicake Pocket Master amp list
20 amp models in the AMP module, as Sonicake's V1.3.0 user manual lists them. Firmware V1.1.0 added two bass amps, A BassVT and Voks Bass, and a Clone mode that loads NAM files instead of a built-in model.
| Amp | Based on | Controls printed |
|---|---|---|
| TWD Deluxe | Fender Tweed Deluxe | Gain, Tone, VOL |
| B-Man N | Fender '59 Bassman, Normal channel | Gain, PRES, VOL, Bass, Middle, Treble |
| Dark Twin | Fender '65 Twin Reverb | Gain, VOL, Bass, Middle, Treble, Bright |
| Voks 30N | VOX AC30HW, Normal channel | Gain, VOL, Tone, Bright |
| Jazz 120 | The Jazz Chorus solid state combo | VOL, Bass, Middle, Treble, Bright |
| Brit 45 | Marshall JTM45, Normal channel | Gain, PRES, VOL, Bass, Middle, Treble |
| Brit50 JP | Marshall JTM50 with Jump connection | Gain 1/2, PRES, VOL, Bass, Middle, Treble |
| Brit 800 | Marshall JCM800 | Gain, PRES, VOL, Bass, Middle, Treble |
| B-Man B | Fender '59 Bassman, Bright channel | Not printed for this model |
| Voks 30TB | VOX AC30HW, TB channel | Gain, Tone, VOL, Bass, Treble, Char (Cool or Hot) |
| Sol100OD | Soldano SLO100, crunch channel | Gain, PRES, VOL, Bass, Middle, Treble |
| DizzyVH | Diezel VH4, 3rd channel | Not printed for this model |
| Eng120 | ENGL Savage 120 E610 | Not printed for this model |
| Halen51 | Peavey 5150, LEAD channel | Not printed for this model |
| Sol100LD | Soldano SLO100, Overdrive channel | Not printed for this model |
| CalifDualV | Mesa/Boogie Dual Rectifier, Vintage mode | Not printed for this model |
| CalifDualM | Mesa/Boogie Dual Rectifier, Modern mode | Not printed for this model |
| EngPower | ENGL Powerball II E645/2, lead channel (Channel 4) | Not printed for this model |
| FlymanB1+ | A Brown Eye UK-style boutique head, HBE channel | Gain, PRES, VOL, Bass, Middle, Treble |
| BogXT | Bogner XTC, red channel | Not printed for this model |
Sonicake Pocket Master IR cab list
15 cab IRs in the IR module, each with a VOL control, plus five User IR slots for your own IRs, loaded with Sonicake's software.
| Cab | Sonicake's description |
|---|---|
| TWD 1x8 | Vintage Fender Champ 1x8in cabinet |
| TWD-P 1x10 | Vintage Fender Princeton 1x10in cabinet |
| Viblux 1x12 | Vintage Fender Vibrolux 1x12in cabinet |
| Voks 1x12 | Vintage VOX AC15 1x12in cabinet |
| TWD 2x12 | A custom Fender Tweed 2x10in cabinet |
| Double 2x12 | Vintage Fender '65 Twin Reverb 2x12in cabinet |
| Star 2x12 | Mesa/Boogie Lonestar 1x12in cabinet |
| Jazz 2x12 | The Jazz Chorus 2x12in cabinet |
| BritGN 2x12 | Marshall 2550 2x12in cabinet |
| BritGN 4x12 | Vintage Marshall 4x12in cabinet with Celestion Greenback speakers |
| Bog 4x12 | Bogner 4x12in cabinet |
| Dizzy 4x12 | Diezel 4x12in cabinet |
| Halen 4x12 | Peavey 6505 4x12in cabinet |
| Sol 4x12 | Soldano 4x12in cabinet |
| Dual 4x12 | Mesa/Boogie Rectifier 4x12in cabinet |
| User IR 1 to 5 | Your own IRs |
Sonicake Pocket Master effects list
The other modules in the chain, from Sonicake's V1.3.0 manual: NR, FX1, DRV, EQ, FX2, DLY and RVB, with AMP and IR, nine in all. FX1 and FX2 share one list. Firmware V1.1.0 added Bass Drive to DRV.
- NR (1)
- Gate (based on the ISP Decimator)
- FX1 and FX2 (18)
- COMP 1 (Ross Compressor), COMP 2 (Keeley C4), Touch Wah, Auto Wah, Boost (Xotic EP Booster), A-Chorus (Arion SCH-1), B-Chorus (for bass), Flanger, Phaser (MXR M101 Phase 90), Vibe (Voodoo Lab Micro Vibe), Vibrato, Tremolo (Demeter TRM-1), Sine Trem, Bias Trem, Octave, Pitch, Detune, AC Sim (acoustic simulator)
- DRV (7)
- Scream (Ibanez TS-808), Butter OD, JP Dist, Shark (MI Audio Crunch Box), Dark Mouse (ProCo Rat), Grey Fuzz (Sola Sound Tone Bender Mk II), Red Fuzz (Dallas-Arbiter Fuzz Face)
- EQ (3)
- GT EQ 1 (125Hz, 400Hz, 800Hz, 1.6kHz, 4kHz), GT EQ 2 (100Hz, 500Hz, 1kHz, 3kHz, 6kHz), Bass EQ (50Hz, 120Hz, 400Hz, 800Hz, 4.5kHz)
- DLY (9)
- Pure, Slap, Warm, Mag, Tube, Reverse, Analog, Sweep, Ping Pong
- RVB (10)
- Air, Room, Hall, Church, Plate 1, Plate 2, Spring, Light, Ocean, Dream
Sonicake Pocket Master questions
What amps are in the Sonicake Pocket Master?
20 in the V1.3.0 manual: Fender-based TWD Deluxe, B-Man N, B-Man B and Dark Twin; VOX-based Voks 30N and Voks 30TB; Jazz 120; Marshall-based Brit 45, Brit50 JP and Brit 800; and high gain models based on Soldano, Diezel, ENGL, Peavey, Mesa/Boogie and Bogner heads, plus FlymanB1+. Firmware V1.1.0 added two bass amps, A BassVT and Voks Bass.
How many presets does the Sonicake Pocket Master have?
100 preset slots, with 50 factory presets. Sonicake's manual does not list the factory presets by name. The MIDI list numbers the presets P01 to P50 and F01 to F50.
What effects does the Sonicake Pocket Master have?
Up to nine at once, one per module: a Gate in NR; 18 effects shared by FX1 and FX2, among them two compressors, Touch Wah, Auto Wah, Boost, chorus, flanger, phaser, Vibe, tremolos, Octave, Pitch, Detune and AC Sim; seven drives and fuzzes in DRV; three 5-band EQs; nine delays; and ten reverbs.
Can the Sonicake Pocket Master load NAM files?
Yes, from firmware V1.1.0, which added the Clone function. In the AMP module, change Mode from Basic to Clone and choose the NAM file, loaded with the Sonicake Manager computer software or the SONICLINK mobile app. Sonicake's download page says its latest software supports NAM A2.
Can you load IRs into the Sonicake Pocket Master?
Yes, into five User IR slots in the IR module, with Sonicake's software, alongside the 15 built-in cab IRs.
What app works with the Sonicake Pocket Master?
Two. SONICLINK on a phone connects over Bluetooth to edit tones and parameters and manage presets, IRs and tone learning files, but cannot update firmware. Sonicake Manager on Windows or Mac manages presets, IRs and tone learning files and updates the firmware, but does not edit tones.
How does the looper work on the Sonicake Pocket Master?
Hold both buttons together on the main menu to open it. The buttons start recording, playback and overdubs and stop the loop, and holding the stop button clears all recorded phrases. Firmware V1.3.3 raised the looper to 20 seconds, and V1.2.2 added a Pre or Post switch: Pre records without effects, Post with them.
How does the tuner work on the Sonicake Pocket Master?
Press both buttons together on the main menu to turn it on.
Can you record with the Sonicake Pocket Master?
Yes. Over USB-C it works as a 2-in, 2-out audio interface, recording at 44.1kHz and 16 bit. In Settings, USB sets the effect recording level, the Bluetooth audio recording level and the monitor level, each from -20dB to 20dB.
Does the Sonicake Pocket Master have a battery?
Yes, a built-in 1000mAh lithium battery, charged and powered over USB-C at 5V. The screen shows the battery level on the main menu. Sonicake's manual gives no battery life.
Does the Sonicake Pocket Master work with MIDI?
Yes, over Bluetooth MIDI and USB MIDI from firmware V1.3.3. The V1.3.0 manual's MIDI list covers preset and bank changes, master and preset volume, switching each module on and off, the tuner, the looper and the drums.
How do you reset the Sonicake Pocket Master?
Go to Settings, then Reset, and choose Continue. It restores the factory settings and removes every preset you have edited and your own settings.
Does the Sonicake Pocket Master have drums?
Yes. Press the VALUE/VOL knob and select Drum to open the Drum menu; the two buttons and the VALUE/VOL knob pick and change its options.
What can you plug into the Sonicake Pocket Master output?
Its 1/4in TRS stereo output takes headphones, amps or pedals, and the input is a 1/4in TS mono jack for your guitar. It has two USB-C ports: one for a phone or computer, one for power and charging.
How do you build a patch on the Sonicake Pocket Master?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the Sonicake Pocket Master?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Sonicake Pocket Master in it. A first plan starts with 7 days free, $0 today.