Hotone Ampero Mini presets and settings
Compact unit with a 4 inch touch screen, two footswitches and an EXP/CTRL jack. 52 amps, 50 cabinets, 10 User IR slots and 199 effects in all, 198 patches, a 100 second looper, 100 drum styles and USB recording.
⚡ Match a tone on this unitHow do you dial in a specific tone on a Hotone Ampero Mini?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the Hotone Ampero Mini name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Free download
Printable cheat sheet: PDF and PNG
The clean, edge, classic rock, metal and lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Hotone Ampero Mini
Values as the unit's screen shows them, on its own scale; each drawn knob shows that value's share of the range. They are where to begin, not Hotone's numbers: pick the amp model first, then move one control at a time from here.
Clean
Black Twin, which Hotone says is based on a Fender '65 Twin Reverb. Gain 30, Bass 50, Middle 50, Treble 60, with Bright on and Master set to match your other patches. Hotone's manual gives every amp knob a range of 0 to 100 and lists no preset values, so every setting on this page is Tonelify's starting point on that scale. For width, put Aozora Chorus, based on the Arion SCH-1, in FX3 after the amp, pick Black Twin 2x12 in the CAB module and add Spring in the RVB module.
- Gain 30
- Bass 50
- Middle 50
- Treble 60
Bright on. Aozora Chorus in FX3, Black Twin 2x12 cab.
Edge of breakup
Voxy 30HW TB, Hotone's model of the Top Boost channel of a VOX AC30HW. Volume 55, Tone Cut 40, Bass 45, Treble 60, with Char on Cool, the lower of its two gain ranges. Tone Cut works the other way round from a treble knob: Hotone's manual says turning it counterclockwise brightens the tone. Dig in for grit and play lighter to clean up. For more push, put Green Drive, based on the Ibanez TS-808 Tube Screamer, in FX1 with its Gain low and its Volume up. Voxy 2x12 in the CAB module suits it.
- Volume 55
- Tone Cut 40
- Bass 45
- Treble 60
Char on Cool. Green Drive in FX1, Gain low, Volume up.
Classic rock
Marshell 800, which Hotone bases on a Marshall JCM800. Gain 60, Bass 50, Middle 65, Treble 60, with Master to taste. Keep the mids up: rock guitar sits in the midrange, and scooping it is the usual reason a patch sounds thin next to a band. Marshell 45 Jump, Hotone's JTM45 with its channels jumped, and Marshell 50 Jump, its JMP50, are the next amps to try. A UK 4x12 in the CAB module, such as UK Green 4x12, is the cabinet to start with.
- Gain 60
- Bass 50
- Middle 65
- Treble 60
Metal
Rector Dual M, based on the third channel of a Mesa/Boogie Dual Rectifier in modern mode. Gain 60, Presence 50, Bass 55, Middle 40, Treble 60, with Rector 4x12 in the CAB module. Turn on Smart Gate in the NR module, which Hotone bases on the ISP Decimator, and raise its Threshold just enough to quiet the hiss between chords. For tighter palm mutes, put Green Drive in FX1 with its Gain low and take the amp's Gain down a step. Eddie 51, Hotone's Peavey 5150, and Engle Saga 1 are the next amps to try.
- Gain 60
- Presence 50
- Bass 55
- Middle 40
- Treble 60
Smart Gate in NR; Green Drive in FX1 before more Gain.
Lead
Soloist 100 Lead, based on the overdrive channel of a Soldano SLO100. Gain 65, Bass 50, Middle 60, Treble 55, with Soloist 4x12 in the CAB module. Put Analog Eko in the DLY module with a low Mix and its Sync on, then hold footswitch 2 to switch it to Tap Tempo, so the delay time follows your tapping. Hall in the RVB module adds room. For a rhythm and a lead sound in one patch, hold footswitch 1 for the CTRL function and pick which modules it turns on in CTRL Settings.
- Gain 65
- Bass 50
- Middle 60
- Treble 55
Analog Eko in DLY, Mix low, Sync on; Hall in RVB.
Chasing one song? Name it and the matcher writes that song's settings for the Hotone Ampero Mini.
Hotone Ampero Mini amp list
The V1.0 manual lists 52 models in the AMP module: 45 guitar amps, 5 bass amps and 2 acoustic preamps. Hotone names the amp behind each one, given here in its own words; the names are trademarks of their owners and are used only to identify the sound. Every amp knob runs from 0 to 100.
| Model | Based on, per Hotone | Type |
|---|---|---|
| Tweed Lux | Fender Tweed Deluxe (bright channel, 5E3 version) | Guitar |
| Baseman Norm | Fender '59 Bassman (normal channel) | Guitar |
| Baseman Bright | Fender '59 Bassman (bright channel) | Guitar |
| Black Twin | Fender '65 Twin Reverb | Guitar |
| Glacian Clean | Bogner Shiva (20th Anniversary version, Ch1) | Guitar |
| Glacian Drive | Bogner Shiva (20th Anniversary version, Ch2) | Guitar |
| Emperor Clean | Matchless Chieftain 212 combo (clean tone) | Guitar |
| Emperor Drive | Matchless Chieftain 212 combo (dirty tone) | Guitar |
| Superstar Clean | Mesa/Boogie Lone Star (CH1) | Guitar |
| Superstar Drive | Mesa/Boogie Lone Star (CH2) | Guitar |
| Jazz Clean | The "Jazz Chorus" solid state combo | Guitar |
| Voxy 30HW Norm | VOX AC30HW (normal channel) | Guitar |
| Voxy 30HW TB | VOX AC30HW (Top Boost channel) | Guitar |
| Marshell 45 | Marshall JTM45 (normal channel) | Guitar |
| Marshell 45+ | Marshall JTM45 (High Treble channel) | Guitar |
| Marshell 45 Jump | Marshall JTM45 ("Jump" connection) | Guitar |
| Marshell 50 | Marshall JMP50 (normal channel) | Guitar |
| Marshell 50+ | Marshall JMP50 (High Treble channel) | Guitar |
| Marshell 50 Jump | Marshall JMP50 ("Jump" connection) | Guitar |
| Marshell 800 | Marshall JCM800 | Guitar |
| Marshell 900 | Marshall JCM900 (Model 4100, channel B) | Guitar |
| Hot Kitty Drive | Bad Cat Hot Cat 30 (drive channel) | Guitar |
| Messe IIC+ 1, 2 and 3 | Mesa/Boogie Mark II C+ (Lead channel), 3 switch settings | Guitar |
| Messe IV Lead 1, 2 and 3 | Mesa/Boogie Mark IV (Lead channel), 3 switch settings | Guitar |
| Soloist 100 Crunch | Soldano SLO100 (normal channel, dirty sound) | Guitar |
| Soloist 100 Lead | Soldano SLO100 (overdrive channel) | Guitar |
| Fryman B1 and B2 | The "Brown Eye" UK-style boutique head (BE channel), 2 switch settings | Guitar |
| Fryman HB and HB+ | The "Brown Eye" UK-style boutique head (HBE channel), 2 switch settings | Guitar |
| Rector Dual V | Mesa/Boogie Dual Rectifier (CH3, vintage mode) | Guitar |
| Rector Dual M | Mesa/Boogie Dual Rectifier (CH3, modern mode) | Guitar |
| Dizzle VH B | Diezel VH4 (CH3, blue version) | Guitar |
| Dizzle VH S | Diezel VH4 (CH3, silver version) | Guitar |
| Dizzle VH+B | Diezel VH4 (CH4, blue version) | Guitar |
| Dizzle VH+S | Diezel VH4 (CH4, silver version) | Guitar |
| Boger XT Red M | Bogner Ecstasy ("Red" channel, Modern mode) | Guitar |
| Engle Saga 1 | ENGL Savage 120 E610 (CH4, contour off) | Guitar |
| Engle Saga 2 | ENGL Savage 120 E610 (CH4, contour on) | Guitar |
| Eddie 51 | Peavey 5150 (LEAD channel) | Guitar |
| Tangerine R100 | Orange Rockerverb 100 (Dirty channel) | Guitar |
| Alchemy Pre | Alembic F-2B preamp | Bass |
| Ampage Classic | Ampeg SVT bass amp | Bass |
| Ampage Flip | Ampeg B-15 "Flip Top" bass amp | Bass |
| Voxy Bass | Vintage VOX AC-100 bass amp | Bass |
| Messe Bass 400 | Mesa/Boogie Bass 400 amp | Bass |
| Acoustic Preamp 1 and 2 | AER Colourizer 2 acoustic preamp, 2 switch settings | Acoustic |
Ampero Mini microphone models
Every cabinet in the CAB module, User IRs included, has the same controls: Mic Type, Low Cut and High Cut, and X, Y and Z for the mic position. Set X and Y to 0 for a mic on axis; Z is the distance from the speaker.
| Mic Type | Based on, per Hotone | Kind |
|---|---|---|
| OFF | No mic simulation | |
| Dyn 57 | Shure SM57 | Dynamic |
| Dyn 58 | Shure SM58 | Dynamic |
| Dyn 421 | Sennheiser MD421 | Dynamic |
| Dyn 16 | Electro-Voice RE16 | Dynamic |
| Dyn 112 | AKG D112 | Dynamic |
| Dyn 609 | Sennheiser e609 | Dynamic |
| Con U67 | Neumann U67 | Condenser |
| Con 87A | Shure Beta 87A | Condenser |
| Con U87 | Neumann U87 | Condenser |
| Rib 121 | Royer R121 | Ribbon |
Ampero Mini footswitch functions
The Mini has two footswitches. Tapping them changes patches; holding them reaches the tools. An external footswitch on the EXP/CTRL jack, set to Single FS or Dual FS in the global EXP/FS menu, adds FS3 and FS4.
| Action | What it does |
|---|---|
| Tap footswitch 1 | Previous patch |
| Tap footswitch 2 | Next patch |
| Hold footswitches 1 and 2 | Tuner |
| Hold footswitches 1 and 2 for more than 2 seconds | Looper; then footswitch 1 is Rec/Play and footswitch 2 is Stop/Clear |
| Hold footswitch 1 | CTRL 1: turns the modules set in CTRL Settings on and off, green on, red off |
| Hold footswitch 2 | Tap Tempo: the LED turns blue and flashes with the tempo |
| FS3 TAP and FS4 TAP | CTRL 1/2/3, looper, drum, tuner, Bank+/Bank-, Tap Tempo, Patch+/Patch- or any module on/off |
Hotone Ampero Mini specifications
- Released
- 2023
Hotone Ampero Mini questions
What is the Hotone Ampero Mini?
The smallest amp modeller and multi-effects unit in Hotone's Ampero range, also called the MP-50. Guitar World reported it on 20 June 2023 at $255, and Gearnews the same day at 229 euros, with the Vanilla finish first and six colours in all. It has a 4 inch 800 by 480 touch screen, two footswitches and a volume knob. Hotone's manual gives its size as 134 by 120 by 49 mm and its weight as 529 g.
What amps are in the Hotone Ampero Mini?
52 models in the AMP module, by our count of Hotone's V1.0 manual: 45 guitar amps, 5 bass amps and 2 acoustic preamps, which matches the 52 amps Gearnews reported at launch. Hotone names the amp behind each one: Black Twin is based on a Fender '65 Twin Reverb, Marshell 800 on a Marshall JCM800, Eddie 51 on a Peavey 5150 and Rector Dual M on a Mesa/Boogie Dual Rectifier. The full list is below.
How many effects does the Ampero Mini have?
Hotone's specification says 199, and that count takes in the amps and cabinets. Up to 9 modules run at once: FX1, FX2, AMP, NR, CAB, EQ, FX3, DLY and RVB, in that order by default. The CAB module holds 40 guitar cabinets, 10 bass cabinets, 10 acoustic body IRs and 10 User IR slots, each with a choice of 10 microphone models. Every effect in the NR module is also available in FX1 and FX2.
How many presets does the Ampero Mini hold?
198 patches: 99 user patches and 99 factory patches, in 66 banks of 3. The 33 user banks can be saved to; the 33 factory banks, F01 to F33, can be adjusted but not saved. Tap footswitch 1 to move back through the patches and footswitch 2 to move forward. Press SAVE at the top right of the screen to keep your changes; the manual warns that switching patches or turning the unit off first loses them.
Can you load IRs into the Ampero Mini?
Yes, into 10 User IR slots in the CAB module, through Hotone's free software. The manual asks for 24-bit, 44.1 kHz mono WAV files and gives the IR processing as 1024 points. It also warns that the output is muted when you switch to an empty User IR slot. User IRs share the same microphone, low cut, high cut and mic position controls as the factory cabinets.
What is the difference between the Ampero and the Ampero Mini?
The Mini is the compact one: two footswitches instead of four, no built-in expression pedal and a weight of 529 g. Both have a 4 inch 800 by 480 touch screen, the same nine-module chain and the same Hotone amp names, such as Black Twin and Rector Dual M. The Mini's V1.0 manual lists 52 amps and 10 User IR slots, where the full-size Ampero's V4.1 manual lists 76 amps and 20. Our Ampero page covers the bigger unit.
How do you use the tuner on the Ampero Mini?
Press and hold footswitches 1 and 2 together. The scale turns from red when out of tune to yellow when close and green when in tune. REF PITCH sets the calibration from 432 to 447 Hz, with 440 Hz as standard, and MODE picks Thru, which passes the signal, Bypass or Mute for silent tuning. Press any footswitch or the Back button on the screen to leave the tuner.
How long is the Ampero Mini looper?
100 seconds in Pre mode or 50 seconds in Post mode. Hold footswitches 1 and 2 together for more than 2 seconds to open the looper. In Pre mode it records mono audio without the effects; in Post mode it records stereo audio with the effects, and changing patches does not change the loop already recorded. Footswitch 1 is Rec/Play and footswitch 2 is Stop/Clear, with half speed and reverse on the screen.
Does the Ampero Mini have a drum machine?
Yes, with 100 drum styles. Press DRUM on the main screen and scroll the style list. TEMPO runs from 40 to 250 BPM and VOLUME from 0 to 100. Turn on BPM SYNC to set the drum tempo with tap tempo, so the drums and the patch share one tempo. Leaving the drum menu does not stop the drums, and the looper has a drum sync switch for recording over a rhythm.
How do tap tempo and the CTRL switch work on the Ampero Mini?
Both sit on the two footswitches. Hold footswitch 2 to switch it to Tap Tempo; its LED turns blue and flashes with the tempo, and effects with Sync on follow it. Hold footswitch 1 to switch it to the CTRL function; pressing it then turns the modules chosen in CTRL Settings on or off, green for on and red for off. There are 3 CTRLs, and CTRL 2 and 3 need an external footswitch.
Can you connect an expression pedal to the Ampero Mini?
Yes. The 1/4 inch TRS EXP/CTRL jack takes an expression pedal or a footswitch, and Hotone names its Ampero Press and Ampero Switch. The global EXP/FS menu sets the jack to EXP, Single FS or Dual FS. A pedal can control 4 effect parameters and the volume at once, each with its own range and Line, Exp or Log curve. Calibrate it from the EXP Settings menu if the sweep feels wrong.
How do you use the Ampero Mini with a guitar amp?
Run the output into the amp's input or, better, its FX loop return, and for best results turn off the AMP and CAB modules, as Hotone advises for both. The global No Cab Mode bypasses the CAB module on the left and right outputs without changing your saved patches. For headphones, turn the AMP and CAB modules on. Turn the volume knob down before you connect anything.
Is the Ampero Mini stereo?
Yes, through one jack. The 1/4 inch TRS output is unbalanced stereo, so a Y cable splits it, tip for left and ring for right. The 1/8 inch headphone output is stereo too, and the 1/8 inch AUX IN takes a phone or music player; the manual says that line is unaffected by the effects and USB audio. The single instrument input is mono, at 4.7 MΩ, for electric and acoustic instruments.
Can the Ampero Mini record to a computer?
Yes. Its USB 2.0 Type-C port supports USB Audio 2.0, at 24-bit and 44.1 kHz. Windows needs Hotone's driver, and the manual says it is plug and play on macOS. Rec Mode sets the left and right recording channels to the dry or the effected signal, Rec Level runs from -20 to +20 dB and Monitor Level from -20 to +6 dB.
What software and power does the Ampero Mini use?
Hotone's free Ampero Mini software for Windows and macOS, downloaded from hotoneaudio.com/support. The manual says it manages the device, adjusts tones, transfers files, updates the firmware, restores settings and loads third-party IR files. Power is 9V DC centre negative from the supplied adapter, with a current draw of 500 mA at most. This page follows the manual for firmware V1.0.
How do you build a patch on the Hotone Ampero Mini?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the Hotone Ampero Mini?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
More Hotone gear
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Hotone Ampero Mini in it. A first plan starts with 7 days free, $0 today.