Xotic EP Booster settings
One knob sets the boost, up to +20dB. Inside the pedal, one DIP switch adds 3dB of gain and the other is a bright switch.
⚡ Match a tone on this pedal- Gain
- Internal +3dB DIP
- Internal bright DIP
How do you dial in a specific tone on a Xotic EP Booster?
A drive pedal is not an amount of gain, it is a shape. The Xotic EP Booster changes what reaches the amp's input, so where it sits in the chain and how the amp is set behind it matter as much as the pedal's own controls. Settings here cover both ends: the pedal, and the amp underneath it.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Free download
Printable cheat sheet: PDF and PNG
The default, unity gain, vintage, crunch amp and before drive settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Xotic EP Booster
Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Xotic's numbers: move one control at a time from here.
Xotic's default setting
+3dB DIP on, Bright DIP on, Gain 7:00. This is the way the pedal ships, from Xotic's manual: DIP switch 1, the +3dB gain, on, and DIP switch 2, the bright switch, on, which Xotic marks as flat EQ. The manual says that in this default setting the Gain knob at minimum gives +3 dB, so even fully down the pedal is a little louder than bypass. Raise Gain from here for more boost.
- +3dB DIP on
- Bright DIP on
- Gain 7:00
DIP settings from Xotic's manual; Gain at minimum gives +3 dB in this setting.
Xotic's unity gain setting
+3dB DIP off, Bright DIP on, Gain 7:00. Xotic's manual calls these DIP positions the unity gain settings: the +3dB step is off and the EQ stays flat. Gain at minimum is Tonelify's start for this setting, not a position Xotic draws, so the pedal starts close to the bypass level. Use it as an always-on tone shaper, then raise Gain if you want it to boost.
- +3dB DIP off
- Bright DIP on
- Gain 7:00
DIP settings from Xotic's manual; the Gain position is Tonelify's.
Xotic's vintage setting
+3dB DIP off, Bright DIP off, Gain 12:00. Xotic's manual calls this pair the vintage settings. With the bright switch off, the EQ is no longer the flat one Xotic marks for the bright switch on, so the boost sounds less bright. Gain at noon is Tonelify's start for this setting, not Xotic's: enough boost to hear the voicing, which you then set by ear.
- +3dB DIP off
- Bright DIP off
- Gain 12:00
DIP settings from Xotic's manual; the Gain position is Tonelify's.
Push a crunch amp
Gain 2:00, +3dB DIP on, Bright DIP on, which are Xotic's default DIP positions. This one is Tonelify's, not Xotic's. Xotic's manual says the pedal gives up to +20dB of boost, so Gain past noon pushes the front of an amp that is already breaking up into more drive and sustain, for a solo or a heavier chorus. This is not a setting from any player's rig. If the amp gets too loud before it gets dirty enough, lower Gain and raise the amp's gain instead.
- Gain 2:00
- +3dB DIP on
- Bright DIP on
Tonelify's starting point, not Xotic's.
Before a drive pedal
Gain 10:00, +3dB DIP on, Bright DIP on, which are Xotic's default DIP positions. This one is Tonelify's, not Xotic's. Placed before an overdrive, a little boost tightens the drive and adds output without changing the drive pedal's settings. Start low, because the drive pedal multiplies whatever the EP Booster adds.
- Gain 10:00
- +3dB DIP on
- Bright DIP on
Tonelify's starting point, not Xotic's.
Chasing one song? Name it and the matcher writes that song's settings for the Xotic EP Booster.
What controls does the Xotic EP Booster have?
The Xotic EP Booster has 3 controls on its front panel: Gain, Internal +3dB DIP switch and Internal bright DIP switch.
Xotic EP Booster specifications
- Front panel
- Gain, Internal +3dB DIP switch, Internal bright DIP switch
What the Xotic EP Booster panel means when you dial it in
Its controls are Gain, Internal +3dB DIP switch and Internal bright DIP switch, and settings for this pedal are written against those names rather than a generic level, tone and gain.
Xotic EP Booster questions
What is the Xotic EP Booster?
A one-knob boost pedal. Xotic's manual says it is a discrete FET preamp with low impedance output providing up to +20db of boost, and its product page says it captures the EP-3 echo machine pre-amp that players such as Jimmy Page, EVH and Eric Johnson used.
What do the EP Booster's DIP switches do?
There are two, inside the pedal. Xotic's manual says DIP switch 1 is a +3db gain and DIP switch 2 is a bright switch. With both on, the default, the EQ is flat and the knob at minimum gives +3 dB. Xotic draws three settings: default (both on), unity gain (+3dB off, bright on) and vintage (both off).
What is the best starting point for the EP Booster?
Xotic's default: both DIP switches on and Gain at minimum, which Xotic's manual says gives +3 dB. From there, raise Gain until the boost does what you want. For a pedal that stays at the bypass level, use Xotic's unity gain DIP setting instead.
Can the EP Booster run at 18 volts?
Yes. Xotic's manual says the EP Booster can be powered by 9-volt up to 18-volts for desired headroom, from an adapter with a negative center 2.1mm x 5.5mm plug. Xotic's product page says higher voltage gives more headroom, and offers its Voltage Doubler for 15 or 18 VDC.
How much boost does the EP Booster give?
Up to +20dB, per Xotic's manual and product page. In the default DIP setting the knob at minimum already adds +3 dB.
Where does the EP Booster go in the pedal chain?
Tonelify's advice, not Xotic's: before a drive pedal to push it harder, or first in the chain as an always-on tone shaper. After drive pedals it works as a volume boost for solos instead.
What power does the EP Booster need?
9 V DC at 5 mA, per Xotic's manual, from one 9-volt battery or an adapter of 9 to 18 VDC with a negative center plug. Xotic's manual says that when an external power supply is used, the battery is disconnected from the circuit.
Is the EP Booster true bypass?
Yes. Xotic's manual and product page both list true bypass switching.
What are the EP Booster's specs?
Input impedance 1M ohm, output impedance 1K ohm minimum and variable, 89 x 38 x 38 mm and 260 g, per Xotic's manual. The manual gives the nominal input as -20db.
Where does the Xotic EP Booster go in the signal chain?
In front of the amp input, before any time-based effects. Drive pedals interact with what the amp is already doing, so the amp's own gain setting is part of the answer and cannot be ignored when the pedal is dialled in.
Does Tonelify support the Xotic EP Booster?
Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Gain, Internal +3dB DIP switch, Internal bright DIP switch. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
The three DIP switch settings, the +3 dB minimum, power and specs are from Xotic's manual; the EP-3 history and the Voltage Doubler are from Xotic's product page. Every Gain position except the default minimum is Tonelify's, not Xotic's.
Similar pedals from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Xotic EP Booster in it. A first plan starts with 7 days free, $0 today.