M-VAVE Blackbox presets and settings
Battery compact modeller with six modules in a changeable order, 20 preamps, 20 IR cab slots, 80 presets, Bluetooth music, USB-C audio and an app editor. Third-party IRs load as 44.1 kHz, 24 bit mono WAV files.
⚡ Match a tone on this unitHow do you dial in a specific tone on a M-VAVE Blackbox?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the M-VAVE Blackbox name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Starting settings on the M-VAVE Blackbox
Values as the unit's screen shows them, on its own scale; each drawn knob shows that value's share of the range. They are where to begin, not M-VAVE's numbers: pick the amp model first, then move one control at a time from here.
Where to start on the M-VAVE Blackbox
Start from a factory preset with the right amp and cab, then adjust by ear. The Blackbox, which M-VAVE's site and manual call the ANNBLACK BOX, has 80 presets: P01 to P40 hold factory sounds, and M-VAVE's preset sheet gives the amp and the IR cab in each one. It has 20 preamp models, 1 to 15 for guitar and 16 to 20 for bass, and 20 IR cab slots split the same way, plus a noise gate, boost and compressor, 7 modulations, 5 delays and 6 reverbs. Each amp has Gain, Level, Bass, Mid and Treble. M-VAVE prints no values for them, so this page gives no numbers: the sections below name the presets whose amp and cab suit each style, from M-VAVE's sheet.
Clean
P09 uses JC120_CL, based on the Roland JC-120 Jazz Chorus, and P05 uses FD_CL, based on the Fender 65 Deluxe Reverb; the sheet gives no cab for either. P26 pairs FD_CL with HIFI_OK, a full-frequency 1x12, and P21 pairs it with JVM_1960_57, the Marshall 1960A 4x12. For a cleaner sound at the start, keep Gain low on the amp and add Spring or Room in the REV module. These are Tonelify's picks from M-VAVE's preset sheet.
Blues and edge of breakup
BLUE_OD, based on the BJFe Baby Blue OD Deluxe, a drive pedal, is in P06, P10, P25, P29 and P30; P25 runs it into AC-SeVin, an AC SEVIN 1x12 sampled with an SM57, and P30 into MeOSick-III, a MESA/Boogie 4x12. J900_CL, based on the Marshall JCM900, is in P01 with AC-SeVin and P17 with MESA_412. For a little more push, Boost in the FX module adds gain, set with its Gain parameter. These are Tonelify's picks from M-VAVE's preset sheet.
Classic rock
J900_DS, based on the Marshall JCM900, with JVM_1960_57, the Marshall 1960A 4x12 sampled with an SM57, is P04 and P22. JVM, based on the Marshall JVM410H, is P24 with the same cab. RAT_OD, based on the Pro Co RAT, with VOX_AC30 is P13 and P14. These are Tonelify's picks from M-VAVE's preset sheet.
Metal
EVH_5150, based on the EVH 5150III 100W, is in P28 with HIW412SWF, a Hiwatt 4x12, and P34 with SoldSC412, a Soldano 4x12. FRIMAN, based on the Friedman JJ-100, is in P19 and P23, and DARKS_DS, based on the TC Electronic Dark Matter, in P11. Turn on the FX module's noise gate: the Gate parameter sets its strength, and 0 turns it off. AI Gate MS adds a Bias control that lets the gate prepare for changes in the noise. These are Tonelify's picks from M-VAVE's preset sheet.
Lead
JVM with G12-EVH_CT, an EVH 4x12 sampled with a U87, is P20 and P35. Add Analog or dTape in the DLY module and tap the time: with the DLY menu on screen, tap the right footswitch. Hold the right footswitch with the delay on for the Freeze function, which holds the delay's wet sound for as long as you keep your foot down. Hall, Shimmer or Cloud in the REV module adds space. These are Tonelify's picks from M-VAVE's preset sheet and manual.
Bass
Amps 16 to 20 and IR cabs 16 to 20 are for bass, and the manual says presets P36 to P40 were designed for bass; on the sheet, P37 to P40 use the bass amps. P37 is AgDb750_BS, based on the Aguilar DB750, with Agula410, an Aguilar 4x10. P38 is ApSVT_BS, based on the Ampeg SVT-CL, with AgSVT410, an Ampeg SVT-410 HLF. P39 is DgXu_BS, based on the Darkglass XUltra, and P40 PjBuddy_BS, based on the Phil Jones Bass Buddy, with no cab given on the sheet. MarkLm_BS, based on the Markbass Little Mark 250, is in no factory preset.
How to edit and save on the Blackbox
Press a module button, FX, AMP, MOD, DLY, REV or CAB, to open its Edit Settings Menu, and press it again to turn the module on or off; hold it to switch the module on or off at any time. Turn the PARA knob to choose and change parameters and click it to confirm. To save, hold PARA for 1 second to reach Save to, choose a slot and confirm; hold it for 2 seconds for Swap to, which moves a preset to another slot. Press HOME twice to reach the Module Operation Screen, where PARA moves modules in the chain and the footswitches pick a module and turn it on or off.
Chasing one song? Name it and the matcher writes that song's settings for the M-VAVE Blackbox.
M-VAVE Blackbox amp list
20 preamp models in the AMP module: 1 to 15 for guitar, 16 to 20 for bass. Each has Gain, Level, Bass, Mid and Treble. The names and the amps they are based on are from M-VAVE's ANNBLACK BOX preset sheet.
| No. | Amp | Type | Based on |
|---|---|---|---|
| 1 | J900_CL | Clean | Marshall JCM900 |
| 2 | FD_CL | Clean | Fender 65 Deluxe Reverb |
| 3 | JC120_CL | Clean | Roland JC-120 Jazz Chorus |
| 4 | BLUE_OD | Overdrive | BJFe Baby Blue OD Deluxe |
| 5 | RAT_OD | Overdrive | Pro Co RAT |
| 6 | M-VAVE_OD | Overdrive | M-VAVE OD |
| 7 | SUPA_OD | Overdrive | Xotic EP |
| 8 | DARKS_DS | Distortion | TC Electronic Dark Matter |
| 9 | J900_DS | Distortion | Marshall JCM900 |
| 10 | JHS_DS | Distortion | JHS "Loud Is More Good" |
| 11 | EVH_5150 | Distortion | EVH 5150III 100W |
| 12 | FRIMAN | Distortion | Friedman JJ-100 |
| 13 | XC_DS | Distortion | Rocktron XDC |
| 14 | ROOM40 | Distortion | MPF Sounds Room |
| 15 | JVM | Distortion | Marshall JVM410H |
| 16 | AgDb750_BS | Bass | Aguilar DB750 |
| 17 | ApSVT_BS | Bass | Ampeg SVT-CL |
| 18 | PjBuddy_BS | Bass | Phil Jones Bass Buddy |
| 19 | DgXu_BS | Bass | Darkglass XUltra |
| 20 | MarkLm_BS | Bass | Markbass Little Mark 250 |
M-VAVE Blackbox IR cab list
20 IR cab slots in the CAB module, 1 to 15 for guitar and 16 to 20 for bass, each a sampled cab with the mic M-VAVE names. You can replace them with your own IRs: 44.1 kHz, 24 bit mono WAV files with 1024 sampling points, loaded with the app or the computer software.
| No. | Cab | Size | Sampled from, with mic |
|---|---|---|---|
| 1 | AC-SeVin | 1x12 | AC SEVIN with SM57 |
| 2 | JVM_1960_57 | 4x12 | Marshall 1960A 412 with SM57 |
| 3 | V30_MD421 | 4x12 | Orange PPC with MD421 |
| 4 | G12-EVH_CT | 4x12 | EVH 412 Straight with U87 |
| 5 | HIFI_OK | 1x12 | HIFI Full Frequency with MD421 |
| 6 | WANGS212_ECM | 2x12 | Wangs GS212 G12 with U87 |
| 7 | VOX_AC30 | 2x12 | VOX AC30 212 with U87 |
| 8 | FRMAN112 | 1x12 | Friedman Vintage 112 with MD421 |
| 9 | MeOSick-III | 4x12 | MESABoogie Standard Oversized with MD421 |
| 10 | SoldSC412 | 4x12 | Soldano Straight Classic with MD421 |
| 11 | FD_TW1980 | 2x12 | Fender 65 Deluxe Reverb with SM57 |
| 12 | MESA_412 | 4x12 | MesaBoogie Rectifier Traditional Straight with MD421 |
| 13 | HIW412SWF | 4x12 | Hiwatt SE 412 with U87 |
| 14 | Recto_112 | 1x12 | MesaBoogie Rectifier 112 with SM57 |
| 15 | JC120_BOX | 2x12 | Roland JC-120 Jazz Chorus 212 with SM57 |
| 16 | Agula410 | 4x10 | Aguilar DB 410 with SM57 |
| 17 | AgSVT410 | 4x10 | Ampeg Heritage SVT-410 HLF with MD421 |
| 18 | DgDG212N | 2x12 | Darkglass DG212N with MD421 |
| 19 | MbSway210 | 2x10 | Mesa Boogie Subway 210 with MD421 |
| 20 | Tace412 | 4x12 | Trace Elliot 412 with SM57 |
M-VAVE Blackbox effects list
The other four modules, from M-VAVE's user manual. The FX module runs one of its types at a time, with the noise gate addable to Boost and Compress, and the order of all six modules can be changed.
- FX (4)
- Noise Gate++, Boost (Gate, Gain), Compress (Gate, Sustain, Attack, Level), AI Gate MS (Gate, Bias)
- MOD (7)
- Chorus, Phaser, Tremolo, Flanger, Vibrato, Univibe, Autofilter
- DLY (5)
- Analog, Ducking Delay, dTape, Dual Delay, Lofi Delay
- REV (6)
- Room, Hall, Swell, Spring, Shimmer, Cloud
M-VAVE Blackbox preset list
The Blackbox has 80 presets. P01 to P40 hold M-VAVE's factory sounds, and the manual says P36 to P40 were designed for bass; P41 to P80 are for your own. This is the amp and cab M-VAVE gives for each factory preset.
| Preset | Amp | Cab |
|---|---|---|
| P01 | J900_CL | AC-SeVin |
| P02 | RAT_OD | JVM_1960_57 |
| P03 | M-VAVE_OD | JVM_1960_57 |
| P04 | J900_DS | JVM_1960_57 |
| P05 | FD_CL | none given |
| P06 | BLUE_OD | HIFI_OK |
| P07 | M-VAVE_OD | HIFI_OK |
| P08 | XC_DS | JVM_1960_57 |
| P09 | JC120_CL | none given |
| P10 | BLUE_OD | JC120_BOX |
| P11 | DARKS_DS | JC120_BOX |
| P12 | XC_DS | JC120_BOX |
| P13 | RAT_OD | VOX_AC30 |
| P14 | RAT_OD | VOX_AC30 |
| P15 | RAT_OD | FRMAN112 |
| P16 | JHS_DS | FRMAN112 |
| P17 | J900_CL | MESA_412 |
| P18 | J900_DS | MESA_412 |
| P19 | FRIMAN | WANGS212_ECM |
| P20 | JVM | G12-EVH_CT |
| P21 | FD_CL | JVM_1960_57 |
| P22 | J900_DS | JVM_1960_57 |
| P23 | FRIMAN | JVM_1960_57 |
| P24 | JVM | JVM_1960_57 |
| P25 | BLUE_OD | AC-SeVin |
| P26 | FD_CL | HIFI_OK |
| P27 | RAT_OD | V30_MD421 |
| P28 | EVH_5150 | HIW412SWF |
| P29 | BLUE_OD | HIFI_OK |
| P30 | BLUE_OD | MeOSick-III |
| P31 | RAT_OD | FD_TW1980 |
| P32 | M-VAVE_OD | JC120_BOX |
| P33 | ROOM40 | MESA_412 |
| P34 | EVH_5150 | SoldSC412 |
| P35 | JVM | G12-EVH_CT |
| P36 | XC_DS | MESA_412 |
| P37 | AgDb750_BS | Agula410 |
| P38 | ApSVT_BS | AgSVT410 |
| P39 | DgXu_BS | none given |
| P40 | PjBuddy_BS | none given |
M-VAVE Blackbox questions
What amps are in the M-VAVE Blackbox?
20 preamp models: 15 for guitar and 5 for bass. The guitar ones are three cleans, J900_CL, FD_CL and JC120_CL, based on the Marshall JCM900, Fender 65 Deluxe Reverb and Roland JC-120; four overdrives based on drive pedals, the BJFe Baby Blue, Pro Co RAT, M-VAVE's own OD and Xotic EP; and eight distortions, among them the Marshall JCM900 and JVM410H, the EVH 5150III and the Friedman JJ-100. The bass ones are based on the Aguilar DB750, Ampeg SVT-CL, Phil Jones Bass Buddy, Darkglass XUltra and Markbass Little Mark 250.
How many presets does the M-VAVE Blackbox have?
80. The first 40, P01 to P40, contain M-VAVE's factory sounds, with P36 to P40 designed for bass, and every one can be edited and saved over. Turn the PARA knob on the preset number to switch quickly, or use the footswitches: left goes down, right goes up on the Main Display Screen.
What effects does the M-VAVE Blackbox have?
Six modules: FX with Noise Gate++, Boost, Compress and AI Gate MS; AMP with 20 preamps; MOD with Chorus, Phaser, Tremolo, Flanger, Vibrato, Univibe and Autofilter; DLY with Analog, Ducking Delay, dTape, Dual Delay and Lofi Delay; REV with Room, Hall, Swell, Spring, Shimmer and Cloud; and CAB with 20 IR slots. M-VAVE gives 6+1 effects at once, the noise gate riding along with Boost or Compress, and the order of the six modules can be changed.
How do you save a preset on the M-VAVE Blackbox?
Press and hold the PARA knob for 1 second to open the Save to screen, choose the slot, and confirm. Holding it for 2 seconds opens Swap to instead. Click HOME on either screen to leave without saving.
Can you load IRs into the M-VAVE Blackbox?
Yes, with M-VAVE's app or computer software, into the 20 IR CAB slots. M-VAVE gives the format as 44.1 kHz, 24 bit mono WAV files with 1024 sampling points. The CAB module also has Level, a Low cut from 20 to 300 Hz and a High cut from 18000 down to 5000 Hz.
How long does the M-VAVE Blackbox battery last?
Up to 10 hours on a full charge, from a built-in 2000 mAh battery. It charges over USB-C from a 5V adapter or a power bank; with a 5V 2A adapter, a full charge takes 5 hours. The charging light stays red while charging and changes colour when full. M-VAVE says to charge it in time when the battery runs low.
How does the M-VAVE Blackbox tuner work?
Press the left and right footswitches together, and click either one to leave. The tuner screen sets the reference A from 430 to 450 Hz, 440 Hz by default, and the Mode to Bypass or Mute.
How does tap tempo work on the M-VAVE Blackbox?
Open the MOD or DLY module's menu and tap the right footswitch: on MOD it sets the Speed, on DLY the Time, and the module's button light blinks in time when the module is on. Holding the right footswitch in the DLY menu, with the delay on, freezes the delay sound until you let go.
What app works with the M-VAVE Blackbox?
M-EFCS, for Windows, Mac, iOS and Android, over Bluetooth on a phone. It edits, swaps, shares, imports and exports presets, imports IR files and amp model files in AM2, AM3 and AMx formats, restores factory settings and updates the firmware on a computer. To connect on a phone, turn on Bluetooth on both, open the app, tap the menu button, choose Current Device, select ANNBLACK BOX and scan.
How do you reset the M-VAVE Blackbox?
M-VAVE says to do it in the mobile app or the computer software. You can reset the 40 factory presets alone to their defaults, or all 80.
Can you record with the M-VAVE Blackbox?
Yes. Over USB-C it works as a computer sound card at 44.1 kHz and 24 bit, and with an OTG adapter, bought separately, it records into a phone's video or audio app. Loopback is on from the factory, so music from the computer or phone, USB or Bluetooth, is recorded on the same track as the guitar; turn it off in the software to record only the instrument.
Can you play music through the M-VAVE Blackbox?
Yes, over Bluetooth, and you hear it with your guitar on headphones from the 1/8in stereo output. Hold the HOME button to turn Bluetooth on or off. The MASTER knob does not change the Bluetooth or USB music level.
Can you add footswitches to the M-VAVE Blackbox?
Yes, with a MIDI pedal over cable or wireless, such as M-VAVE's Chocolate Plus. It can step through presets in banks of 4, switch the six modules on and off, and stand in for the HOME button and the PARA knob's press and turns.
Does the M-VAVE Blackbox work for bass?
Yes. Amps 16 to 20 and IR cabs 16 to 20 are for bass, based on Aguilar, Ampeg, Phil Jones, Darkglass and Markbass amps and on Aguilar, Ampeg, Darkglass, Mesa Boogie and Trace Elliot cabs, and presets P36 to P40 were designed for bass. The Autofilter, M-VAVE says, works on guitar and bass.
How do you build a patch on the M-VAVE Blackbox?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the M-VAVE Blackbox?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
More M-VAVE gear
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the M-VAVE Blackbox in it. A first plan starts with 7 days free, $0 today.