Roland JC-40 Jazz Chorus settings
Built around its clean channel and stereo chorus. There is no presence control and no master volume.
⚡ Match a tone on this ampHow do you dial in a specific tone on a Roland JC-40 Jazz Chorus?
Solid-state amps hold their voicing steady across the volume range, which makes the Roland JC-40 Jazz Chorus far more predictable to dial in than a valve amp and is exactly why some of the most aggressive rhythm tones ever recorded came off solid-state heads. The trade is headroom before the EQ starts to sound brittle, so on this amp the treble and presence controls do more damage than the gain control does.
Name the song you are chasing and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.
What controls does the Roland JC-40 Jazz Chorus have?
Roland JC-40 Jazz Chorus specifications
- Power
- 40W, as 2x20W stereo
- Speaker
- 2x10"
- Front panel
- Bright switch, Volume, Treble, Middle, Bass, Distortion, Reverb, Vib/Chorus switch, Speed, Depth
What the Roland JC-40 Jazz Chorus panel means when you dial it in
40W, as 2x20W stereo through a 2x10". There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. Drive and volume have separate knobs, so the amp can sound driven at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. Reverb is onboard, so a tone that needs it does not need a pedal in the chain.
Tones to try on a Roland JC-40 Jazz Chorus
Roland JC-40 Jazz Chorus questions
What are good starting settings on a Roland JC-40 Jazz Chorus?
Start from the middle of the range on Volume, Treble, Middle, Bass and move one control at a time. There is no single correct set of numbers for this amp, because the target changes with the song. Tonelify writes the values for a named tone against this amp's actual panel: Bright switch, Volume, Treble, Middle, Bass, Distortion, Reverb, Vib/Chorus switch, Speed, Depth.
Can the Roland JC-40 Jazz Chorus get a metal tone?
Yes. Solid-state heads are behind some of the tightest recorded rhythm tones, because their gain stays consistent instead of softening as the amp is pushed. What they need is a firmer hand on the treble and presence controls than a valve amp does.
Does Tonelify support the Roland JC-40 Jazz Chorus?
Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Bright switch, Volume, Treble, Middle, Bass, Distortion, Reverb, Vib/Chorus switch, Speed, Depth. You will not be told to set a knob that is not there.