Fender Mustang LT50 settings
Six knobs: Gain, Volume, Treble, Middle, Bass and Master Volume. The amp model is picked with the encoder from twenty, the same twenty as on the LT25. Tap sets the delay time.
⚡ Match a tone on this amp- Gain
- Volume
- Treble
- Middle
- Bass
- Master Volume
- Tap
How do you dial in a specific tone on a Fender Mustang LT50?
The Fender Mustang LT50 is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.

Free download
Printable cheat sheet: PDF and PNG
The clean, blues, classic rock, metal and hard rock settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Fender Mustang LT50
Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Fender's numbers: pick the amp type first, then move one control at a time from here.
Clean
TWIN CLEAN, based on the 1965 Fender Twin Reverb, or DELUXE CLN, based on the 1965 Deluxe Reverb. Gain 2 to 3, Treble 6, Middle 5, Bass 5, with SPRING 65 in the REV slot at a low level. Each knob changes that setting in the preset you are on, and the screen shows the value as you turn. Keep Gain low and take the loudness from Volume, the preset's own level, and Master Volume, which sets the amp's overall volume. For a clean that stays clean however hard you pick, SUPER CLEAN is the studio preamp model Fender describes as clean and uncoloured.
- Gain 2 to 3
- Treble 6
- Middle 5
- Bass 5
SPRING 65 in the REV slot, kept low.
Edge of breakup and blues
DELUXE DIRT, based on a 1957 tweed Deluxe that Fender describes as known for thick, compressed overdrive, or BASSMAN, based on the '59 Bassman. Gain 3 to 4, Treble 5 to 6, Middle 6 to 7, Bass 5. Set Gain where hard picking just starts to break up, then use the guitar's volume: 7 or 8 for rhythm, 10 for a solo. For more push, put BLUES DRIVE, inspired by the Ibanez TS808 Tube Screamer, in the STOMP slot with its own GAIN low, so it thickens the sound rather than taking it over.
- Gain 3 to 4
- Treble 5 to 6
- Middle 6 to 7
- Bass 5
For more push, BLUES DRIVE in the STOMP slot with its GAIN low.
Classic rock
70S ROCK, inspired by a late-'60s or early-'70s Marshall Super Lead, which Fender calls the amp that powered the dawn of hard rock. Gain 5 to 6, Treble 6, Middle 6 to 7, Bass 5, reverb low. Keep Middle up: classic rock lives in the midrange, and on the LT50 Middle has a knob of its own, so when the sound feels thin, turn Middle up before you raise Gain.
- Gain 5 to 6
- Treble 6
- Middle 6 to 7
- Bass 5
Sounds thin? Middle up first, then Gain.
Metal
SUPER HEAVY or METAL 2000, both based on the EVH 5150III, or ALT METAL and 90S ROCK for the Mesa Dual Rectifier. Gain 6 to 7, Treble 6 to 7, Middle 5, Bass 4 to 5. SUPER HEAVY and ALT METAL have a gate with a very fast attenuation curve built in, which leaves the preset's one STOMP slot free: put BLUES DRIVE there with its GAIN near zero and its LEVEL high to tighten the low end, then take the amp's Gain a step lower. On METAL 2000 or 90S ROCK, use the slot for METAL GATE instead. Most rhythm parts need less gain than people expect: each step past 7 adds fizz and blurs palm mutes.
- Gain 6 to 7
- Treble 6 to 7
- Middle 5
- Bass 4 to 5
On METAL 2000, put METAL GATE in the STOMP slot. SUPER HEAVY has its gate built in.
Hard rock and lead
80S ROCK, inspired by the Marshall JCM800, which Fender credits with the quintessential '80s metal tone. Gain 6 to 7, Treble 6, Middle 6 to 7, Bass 5. For a solo, put DELAY, or ECHO, Fender's tape delay based on the Maestro Echoplex, in the DELAY slot, and press TAP two or more times at the song's tempo: the Tap light flashes in time with the delay. Fender's signal path puts DELAY after the amp model, so the repeats stay clear of the distortion. Save the solo as a preset of its own and put it on a footswitch button next to the rhythm sound.
- Gain 6 to 7
- Treble 6
- Middle 6 to 7
- Bass 5
Delay time: press TAP two or more times at the song's tempo.
Saving the five as presets and on the footswitch
Once you change anything, the preset number turns red and the screen reads UNSAVED. Press SAVE, then pick SAVE to keep the edit in the same slot, SAVE AS to put it in another slot under a name you spell with the encoder, or REPLACE to load one of the 30 factory presets into the slot. The LT50 has 60 slots, the 30 factory presets and 30 empty ones for your own, so the five sounds can go in empty slots and every factory preset stays. An edit you do not save is gone when you leave the preset or switch the amp off, and the amp always starts on preset 01. With the optional four-button footswitch, MENU, FOOTSWITCH sets up to eight quick-access presets in two banks of four. Stepping on A and B together moves to BANK 2, and to an EFFECTS mode where A to D turn the preset's STOMP, MOD, DELAY and REVERB effects on and off.
Chasing one song? Name it and the matcher writes that song's settings for the Fender Mustang LT50.
Mustang LT25 vs LT50
Fender's two manuals describe the same amp inside: the same 20 amp models, the same 26 effects, the same 30 factory presets from 01 FENDER CLEAN to 30 ACOUSTIC SIM, the same encoder and four buttons, an aux input, a headphone output and USB recording. What changes is the size, the speaker, a Middle knob, the footswitch and a line out on the back.
| Difference | Mustang LT25 | Mustang LT50 |
|---|---|---|
| Power | 25 watts | 50 watts |
| Speaker | One 8 inch | One 12 inch |
| Middle | Set with the encoder | Its own knob |
| Footswitch | 1 button, 2 presets | 4 buttons: 8 presets, effects, tap, tuner |
| Line out | None listed | 1/4 inch mono, rear panel |
| Recording level | USB GAIN, under MENU, SETTINGS | LEVEL, under MENU, LEVELS, for USB and the line out |
| Size | 14.5 x 13.1 x 8.3 in | 17 x 16.5 x 8.5 in |
| Weight | 12.8 lb (5.8 kg) | 19.8 lb (9 kg) |
Fender Mustang LT50 amp list
20 amp models, in the order Fender's owner's manual lists them, with the amp Fender names for each. Two pairs share an amp: 90S ROCK and ALT METAL are both the Mesa Dual Rectifier, and METAL 2000 and SUPER HEAVY both the EVH 5150III, the second of each with a gate built in. SUPER CLEAN is not modelled on a named amp, and Fender describes EXCELSIOR only as a modern Fender model. Each preset holds one amp model, picked with the encoder.
| LT50 model | Fender's description |
|---|---|
| SUPER CLEAN | A direct-to-desk studio preamp, clean and uncoloured |
| CHAMP | Based on the '57 Champ, the small late-'50s Fender recording amp |
| DELUXE DIRT | Based on a 1957 tweed Deluxe, known for thick, compressed overdrive |
| 50S TWIN | Based on a 1957 Twin, a 2x12 Fender tweed prized for clean-to-dirty versatility |
| BASSMAN | Based on the '59 Bassman, a tweed amp that began life as a bass amp |
| PRINCETON | Based on a 1965 Princeton, with the snappy tone of a single 10-inch speaker |
| DELUXE CLN | Based on the 1965 Fender Deluxe Reverb |
| TWIN CLEAN | Based on the 1965 Fender Twin Reverb, the Fender clean tone |
| EXCELSIOR | A modern Fender model with the thump of a 15-inch speaker |
| SMALLTONE | Inspired by the 1960s Sears Silvertone |
| 70S UK CLN | Inspired by the original 100-watt Hiwatt DR103, the classic cleaner-tone British stack |
| 60S UK CLN | Inspired by the Vox AC30, which powered the British Invasion |
| 70S ROCK | Inspired by a late-'60s or early-'70s Marshall Super Lead, the amp that powered the dawn of hard rock |
| 80S ROCK | Inspired by the Marshall JCM800, which produced quintessential '80s metal tone |
| DOOM METAL | Inspired by the Orange OR120 |
| BURN | Based on the burn channel of the Fender Super-Sonic, two cascading preamp gain stages |
| 90S ROCK | Based on the Mesa Dual Rectifier, whose distortion shaped the nu-metal sound |
| ALT METAL | Based on the Mesa Dual Rectifier, gated with a very fast attenuation curve |
| METAL 2000 | Based on the EVH 5150III |
| SUPER HEAVY | Based on the EVH 5150III, gated with a very fast attenuation curve |
Fender Mustang LT50 effects list
The owner's manual lists 26 effects in the four slots every preset has, STOMP, MOD, DELAY and REV, one effect per slot. The signal runs from the guitar through STOMP and MOD into the amp model, then DELAY and REV, so the drives and the modulation sit in front of the amp and the repeats and reverb after it. The Tap button and its light work with the DELAY slot only.
| Effect | Slot | Fender's description |
|---|---|---|
| OVERDRIVE | STOMP | Fender overdrive designed for the Mustang LT50 |
| BLUES DRIVE | STOMP | Overdrive inspired by the late-'70s Ibanez TS808 Tube Screamer |
| MYTH DRIVE | STOMP | Overdrive inspired by the '90s Klon Centaur |
| ROCK DIRT | STOMP | Distortion inspired by the Pro Co RAT |
| FUZZ | STOMP | Fender fuzz with variable low-end response |
| BIG FUZZ | STOMP | Distortion inspired by the Electro-Harmonix Big Muff |
| OCTOBOT | STOMP | Octave down plus octave-up fuzz, synth-like |
| COMPRESSOR | STOMP | Compressor inspired by the MXR Dyna Comp |
| SUSTAIN | STOMP | Inspired by the MXR M-163 Sustain, strong compression and a short attack |
| METAL GATE | STOMP | Noise gate with a very fast attenuation curve, for high-gain metal |
| 5-BAND EQ | STOMP | Five-band graphic equalizer |
| CHORUS | MOD | Chorus modulated by a triangle wave |
| FLANGER | MOD | Flanging modulated by a triangle wave |
| VIBRATONE | MOD | Late-'60s Fender effect with a rotating speaker baffle |
| TREMOLO | MOD | Tube bias tremolo, as in amps such as the Fender Princeton Reverb |
| PHASER | MOD | The jetliner whoosh heard on countless recordings |
| STEP FILTER | MOD | Dices notes into alternating steps |
| TOUCH WAH | MOD | Wah controlled by picking dynamics, not a pedal |
| DELAY | DELAY | Clean, simple repeats |
| REVERSE | DELAY | Reverses the repeats for the backwards guitar effect |
| ECHO | DELAY | Tape delay based on the Maestro Echoplex, with wow and flutter |
| LARGE HALL | REV | Strong, bright reverb of a large hall |
| SMALL ROOM | REV | Warmer reverb of smaller spaces and classic echo chambers |
| SPRING 65 | REV | The reverb built into mid-'60s Fender amps |
| PLATE | REV | The reverb of countless recordings, based on the EMT 140 |
| ARENA | REV | Long-trailing reverb of stadiums and arenas |
Fender Mustang LT50 factory presets
The 30 factory presets in Fender's owner's manual, the same names as on the LT25. The amp always starts on 01 FENDER CLEAN. The manual gives the LT50 60 preset slots: these 30, and 30 empty ones for your own presets and for presets downloaded with Fender Tone, the desktop app, which offers dozens more Fender presets to audition.
- 01 to 10
- 01 FENDER CLEAN, 02 SILKY SOLO, 03 CHICAGO BLUES, 04 CLASSIC ROCK, 05 DREAMY, 06 COUNTRY PICKING, 07 SKATE PUNK, 08 SOLO MIDBOOST, 09 JAZZ AMP, 10 BRIT 64 RHYTHM
- 11 to 20
- 11 METAL LEAD, 12 VINTAGE TREMOLO, 13 SUPER DRYCLEAN, 14 THRASH OVERKILL, 15 CLEAN DELAY, 16 OCTOBOT ONE NOTE, 17 LITTLE CHAMP, 18 PHASER SWIRL, 19 60S FUZZ, 20 MYTHIC CRUNCH
- 21 to 30
- 21 TOUCH WAH, 22 SUPER ROCK, 23 NICE FLANGER, 24 VIBRA DOOM, 25 SURF MUSIC, 26 BLUES LEAD, 27 ROCK A BILLY, 28 GARAGE FUZZ, 29 SPACE TRAVEL, 30 ACOUSTIC SIM
What controls does the Fender Mustang LT50 have?
The Fender Mustang LT50 has 7 controls on its front panel: Gain, Volume, Treble, Middle, Bass, Master Volume and Tap.
Fender Mustang LT50 specifications
- Power
- 50W
- Speaker
- 1x12" Fender Special Design
- Voicings
- SUPER CLEAN, CHAMP, DELUXE DIRT, 50S TWIN, BASSMAN, PRINCETON, DELUXE CLN, TWIN CLEAN, EXCELSIOR, SMALLTONE, 70S UK CLN, 60S UK CLN, 70S ROCK, 80S ROCK, DOOM METAL, BURN, 90S ROCK, ALT METAL, METAL 2000, SUPER HEAVY
- Front panel
- Gain, Volume, Treble, Middle, Bass, Master Volume, Tap
What the Fender Mustang LT50 panel means when you dial it in
50W through a 1x12" Fender Special Design. There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. The selectable voicings are SUPER CLEAN, CHAMP, DELUXE DIRT, 50S TWIN, BASSMAN, PRINCETON, DELUXE CLN, TWIN CLEAN, EXCELSIOR, SMALLTONE, 70S UK CLN, 60S UK CLN, 70S ROCK, 80S ROCK, DOOM METAL, BURN, 90S ROCK, ALT METAL, METAL 2000 and SUPER HEAVY. Picking the voicing comes before the knob positions, because the same numbers land somewhere else on each one.
Fender Mustang LT50 questions
What is the difference between the Mustang LT25 and LT50?
Mostly size and the panel. Fender's manuals give the LT50 50 watts and one 12 inch speaker against the LT25's 25 watts and 8 inch speaker, a Middle knob of its own where the LT25 sets Middle with the encoder, a four-button footswitch where the LT25 takes one button, and a 1/4 inch mono line out the LT25 does not list. Inside they match: the same 20 amp models, 26 effects and 30 factory presets. The LT50 weighs 19.8 lb, the LT25 12.8 lb. The comparison table above has the rest.
Do Mustang LT25 settings work on the LT50?
Yes. Fender's manuals list the same 20 amp models and 26 effects on both, so an amp model, its knob values and its effects carry across, and the numbers on this page are the ones the LT25 page gives. On the LT50, set Middle with its own knob instead of the encoder. The LT50 is louder and has a bigger speaker, so set Bass and Master Volume by ear in the room.
Does the Mustang LT50 have a mid knob?
Yes. Its six knobs are Gain, Volume, Treble, Middle, Bass and Master Volume, and Fender's manual says Middle affects the midrange tone setting in the active preset. That is one of the differences from the LT25, which has no Middle knob and sets it with the encoder. Turning a knob changes the preset you are on and the screen shows the new value; press SAVE to keep it.
What amp models are on the Fender Mustang LT50?
20, the same as on the LT25, and Fender's owner's manual names the amp behind each. Nine are Fender's own, from CHAMP, the '57 Champ, to TWIN CLEAN, the 1965 Twin Reverb. The rest are a Vox AC30 (60S UK CLN), a Marshall Super Lead (70S ROCK), a Hiwatt DR103 (70S UK CLN), a Marshall JCM800 (80S ROCK), a Mesa Dual Rectifier (90S ROCK and ALT METAL), an Orange OR120 (DOOM METAL), an EVH 5150III (METAL 2000 and SUPER HEAVY), a 1960s Sears Silvertone (SMALLTONE) and a clean studio preamp (SUPER CLEAN). The full table is above.
What effects does the Mustang LT50 have?
Fender's owner's manual lists 26 in four slots: 11 in STOMP, among them BLUES DRIVE, inspired by the Ibanez TS808, MYTH DRIVE, inspired by the Klon Centaur, METAL GATE and a 5-BAND EQ; 7 in MOD; 3 in DELAY, which are DELAY, REVERSE and ECHO; and 5 in REV. A preset holds one effect per slot, so a drive and METAL GATE, both STOMP effects, cannot be on at the same time.
How many presets does the Mustang LT50 have?
60 slots, Fender's owner's manual says: 30 factory presets, from 01 FENDER CLEAN to 30 ACOUSTIC SIM, and 30 empty slots for presets you make and presets downloaded with Fender Tone. All 60 can be changed, and REPLACE can always load any of the 30 factory presets back into a slot. The amp always starts on preset 01.
How do you save a preset on the Mustang LT50?
Press SAVE and pick SAVE to keep the edit in the same slot, SAVE AS to put it in another slot, where you spell a name with the encoder, or REPLACE to load one of the 30 factory presets into the slot. A red preset number and UNSAVED on the screen mean the preset has changes that are not saved yet, and an edit you do not save is lost when you leave the preset or switch the amp off.
What footswitch works with the Mustang LT50?
Fender's four-button MGT-4, part number 0994071000, sold separately, and the manual says the older Fender MS-4 and ULT-4 work too. A magnetic overlay that labels the buttons comes with the amp. The footswitch picks from up to eight quick-access presets in two banks of four, set under MENU, FOOTSWITCH, and stepping on A and B together moves to BANK 2 and to an EFFECTS mode that turns the preset's effects on and off. Stepping twice or more on the current preset's button sets the delay time, and C and D together open the tuner.
Does the Mustang LT50 have a line out?
Yes, a 1/4 inch mono line out on the rear panel, for a mixer or recording gear. Its level is set under MENU, LEVELS, and Fender's manual says Master Volume does not affect it, so the speaker can be turned down without changing what the desk gets. The manual adds that a TRS (stereo) cable can reduce or remove hum. The aux input is not sent to the line out.
Can you record with the Mustang LT50 over USB?
Yes. Connect a computer with a micro USB cable, which is not included. A Mac needs no driver; for Windows, Fender's manual points to Fender's ASIO driver. The USB output is in stereo and its level is set under MENU, LEVELS, with a meter. Master Volume does not change it, though the preset's gain, volume and tone settings do. The USB port cannot record what comes in through the aux input.
How do you factory reset a Mustang LT50?
Press MENU, turn the encoder to RESTORE and choose YES RESTORE; NO CANCEL or BACK leaves it. Fender's manual says it restores all the original factory presets and amplifier settings, and the amp returns to the first preset when it is done. Its progress screen counts through all 60 slots, so back up your own presets first: Fender Tone desktop includes preset backup and restore.
Where is the tuner on the Mustang LT50?
Press and hold TAP until the tuner screen appears, press MENU and choose TUNER, or step on C and D together on the footswitch. The note name shows at the bottom, red bars to the right mean sharp and to the left flat, and the centre bars turn green when the string is in tune. The speaker is muted while you tune, and the guitar's volume has to be up far enough for the tuner to read it.
How do you update the Mustang LT50's firmware?
With Fender Tone, Fender's free desktop app for Mac and PC, from fender.com/ToneDesktop, connected to the amp's USB port. Firmware updates are the first feature Fender's manual lists for it, ahead of dozens of extra presets, preset editing, and backup and restore. MENU, ABOUT shows the firmware version the amp is running.
Does the Mustang LT50 have Bluetooth?
Fender's owner's manual does not mention Bluetooth. Its connections are the instrument input, a 1/8 inch aux input and headphone output, a USB port for recording and Fender Tone, the footswitch jack and a 1/4 inch mono line out. To play along with music, plug a phone or player into the aux input and set the level on it: the amp's volume controls change the overall level, not the aux level on its own.
Can you use headphones with the Mustang LT50?
Yes, on the 1/8 inch headphone output on the top panel, and plugging in mutes the speaker. The 1/8 inch aux input beside it takes a phone for playing along.
What are the best Fender Mustang LT50 settings for metal?
Start with SUPER HEAVY, based on the EVH 5150III with a gate built in, at Gain 6 to 7, Treble 6 to 7, Middle 5 and Bass 4 to 5. These are starting points rather than Fender's numbers. With the gate built in, the STOMP slot is free for BLUES DRIVE with its GAIN low and LEVEL high to tighten palm mutes.
Is there a printable Fender Mustang LT50 settings cheat sheet?
Yes. The cheat sheet on this page puts all five starting settings on one page, from clean to hard rock and lead, each with its amp model, and short tips under them. Download the PDF to print it on white, or save the PNG to your phone.
Does Tonelify support the Fender Mustang LT50?
Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Gain, Volume, Treble, Middle, Bass, Master Volume, Tap. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
- Fender: Mustang LT50 expanded owner's manual (PDF, a retailer's copy)
- Fender: Mustang LT25 expanded owner's manual (PDF), for the comparison
Fender's own site could not be opened when this page was checked, so the LT50 manual above is Fender's PDF as a retailer hosts it, with the retailer's address stamped on the cover. Where Fender's current manual differs, it takes precedence.
More Fender gear
Similar amps from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for the controls the Fender Mustang LT50 has. A first plan starts with 7 days free, $0 today.