Tonelify
Black Friday40% off yearly
Guitar ampModelling combo

Boss Katana 100 Gen 3 settings

The 100-watt Katana Gen 3 combo: one 12-inch speaker, the six Gen 3 amp types, a Presence knob, a three-way Contour button, a Cab Resonance switch, a Solo button, eight tone settings, an effects loop, a line out and Stereo Expand.

⚡ Match a tone on this amp
Front panel19 controls
  • Amp Type knob
  • Variation
  • Gain
  • Volume
  • Contour
  • Bass
  • Middle
  • Treble
  • Booster
  • Mod
  • FX
  • Delay
  • Tap
  • Reverb
  • Presence
  • Master
  • Solo
  • Power Control
  • Cab Resonance
VoicingsAcousticCleanPushedCrunchLeadBrown
The controls on the Boss Katana 100 Gen 3, drawn in a row rather than in the real panel layout. The list comes from Boss's own documentation.

How do you dial in a specific tone on a Boss Katana 100 Gen 3?

The Boss Katana 100 Gen 3 is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.

Boss Katana 100 Gen 3 Settings Cheat Sheet: knob positions for clean, blues, classic rock and metal on one page

Free download

Printable cheat sheet: PDF and PNG

The clean, blues, classic rock and metal settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.

Starting settings on the Boss Katana 100 Gen 3

Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Boss's numbers: pick the amp type first, then move one control at a time from here.

Clean

CLEAN amp type, Gain 2 to 3, Bass 5, Middle 5, Treble 6, Presence 4 to 5, Reverb about 3. Keep Gain low and set the level with Volume, so the sound stays clear when you strum hard. BOSS notes that Clean can also be used for solo or lead in conjunction with the Booster. Start with CAB RESONANCE on VINTAGE, which BOSS describes as the warm and sweet sound of a vintage cabinet. These are starting points, not BOSS's numbers: read each knob as 0 to 10 with 5 at twelve o'clock, and move one control at a time from here.

CLEAN amp typeKatana 100 Gen 3 clean
  • Gain 2 to 3
  • Bass 5
  • Middle 5
  • Treble 6
  • Presence 4 to 5
  • Reverb about 3

Edge of breakup and blues

PUSHED amp type, Gain 3 to 4, Bass 5, Middle 6 to 7, Treble 5 to 6, Presence 5, Reverb about 3. BOSS's launch release describes Pushed as the touch-responsive gain of a clean combo driven into harmonic saturation, so play lighter for a cleaner sound and dig in for grit. CRUNCH at the same settings gives what BOSS calls a fat crunch sound. The BLOOM button, which BOSS says gives a springy low end, is not on the 100: BOSS keeps it for the Katana Head and the two Artists.

PUSHED amp typeKatana 100 Gen 3 edge of breakup
  • Gain 3 to 4
  • Bass 5
  • Middle 6 to 7
  • Treble 5 to 6
  • Presence 5
  • Reverb about 3

Classic rock

CRUNCH amp type, Gain 5 to 6, Bass 5, Middle 6 to 7, Treble 6, Presence 5, Reverb about 2. Keep the mids up: classic rock sits in the midrange, and scooping it is the usual reason a rock tone sounds thin next to a band. The CONTOUR button switches between three types of midrange band characteristics, green, red and orange, then off, so try each before you move the EQ knobs. For a solo, press SOLO rather than raising Gain, so the rhythm sound stays where it was. As shipped, tone setting A CH1 has OVERDRIVE on the Booster's red colour.

CRUNCH amp typeKatana 100 Gen 3 classic rock
  • Gain 5 to 6
  • Bass 5
  • Middle 6 to 7
  • Treble 6
  • Presence 5
  • Reverb about 2

Metal

LEAD or BROWN amp type, Gain 6 to 7, Bass 5 to 6, Middle 5, Treble 6 to 7, Presence 5 to 6, Reverb 1 or off. BOSS describes Lead as covering a wide range from crunch to high gain depending on the gain setting, and Brown as a lead sound with an edge inherited from the BOSS WAZA brown sound. Set CAB RESONANCE to MODERN, which BOSS calls a modern cabinet sound notable for a tight low-end, or DEEP for a powerful low end with a distinctive edge. For tighter palm mutes, add a boost before you add Gain: on tone settings A CH2 and B CH2 to B CH4 as shipped, the BOOSTER button's red colour is MID BST, and in BOSS Tone Studio T-SCREAM, which BOSS models on an Ibanez TS-808, can take its place. If it fizzes, lower Gain first, then Presence. The noise suppressor is set in BOSS Tone Studio, not on the panel.

LEAD or BROWN amp typeKatana 100 Gen 3 metal
  • Gain 6 to 7
  • Bass 5 to 6
  • Middle 5
  • Treble 6 to 7
  • Presence 5 to 6
  • Reverb 1 or off

Add a boost from the Booster before you raise the Gain.

Lead and the Solo button

Press SOLO to switch the solo function on. The 100 has no Solo Level knob: in BOSS Tone Studio, SOLO LEVEL, from 0 to 100, sets the volume while Solo is on, and a three-band SOLO EQ can sit before or after the preamp. If the solo needs to cut more, raise Middle a step on the rhythm sound before you save it, and add Delay, pressing TAP two or more times in time with the song to set the delay time. A latch-type footswitch on the GA-FC jack, an FS-5L, or an FS-6 or FS-7 set to FS-5L (LATCH), switches CH1 and CH2 with its tip and Solo with its ring. The Solo Delay knob and its own TAP button are on the Artist and the Artist Head only.

Recording, the line out and headphones

LINE OUT is a 1/4-inch jack on the rear panel, for a PA or a recorder. Its level follows the VOLUME knob, not MASTER, so you can turn MASTER down and still feed the desk. In BOSS Tone Studio, LINE OUT AIR FEEL sets the sound of the line out, the PHONES/REC OUT and the USB output: REC, a distantly-miked sound for recording; LIVE, a close-miked sound for live; BLEND, a blend of the two; or CUSTOM, with two mic setups of your own. Headphones in STEREO PHONES silence the speaker. Over USB-C, BOSS's KATANA3 driver records at up to 32-bit/96 kHz and carries MIDI for BOSS Tone Studio; the operating system's own driver, from system program 1.07, gives 16-bit/48 kHz audio and no MIDI. POWER AMP IN takes a modeller or preamp straight into the power amp, and only MASTER and POWER CONTROL affect it.

Quiet practice and Power Control

POWER CONTROL has four positions: STANDBY, 0.5 W, HALF and MAX. STANDBY mutes the sound while leaving the amp on and every knob where it was, which BOSS suggests for the gap between sets. At home, use 0.5 W rather than turning MASTER almost off: BOSS's product page says the integrated Power Control lets you dial in cranked-amp inspiration with no adverse effect on the sound.

Chasing one song? Name it and the matcher writes that song's settings for the Boss Katana 100 Gen 3.

Match a song to this amp7 days free, $0 today

Boss Katana 100 Gen 3 amp types

Six amp types on the AMP TYPE knob, each with a second voicing on the VARIATION button, so twelve in all. BOSS's manual says all of them are original: it names no real amp behind any type, and the only lineage it gives is Brown's, from its own Waza amp.

From BOSS's KATANA Gen 3 Reference Manual, page 2.
Amp typeWhat BOSS says it is
ACOUSTICA dedicated acoustic guitar amp that supports connection of an acoustic guitar
CLEANA clean and natural sound; with the Booster it can be used for solo or lead
PUSHEDA big, penetrating sound with a tonal color that responds to your picking nuances
CRUNCHA fat crunch sound that faithfully responds to the nuances of your picking
LEADCovers a wide range from crunch to high gain, depending on the gain setting
BROWNA lead sound with an edge inherited from the BOSS WAZA brown sound

Boss Katana 100 Gen 3 factory tone settings

The eight tone settings as shipped, four channels in each bank, with BOSS's names. BOSS's Gen 3 manual prints one set and marks none of it by model, so these are the same eight as on the Artist; the 100 has no BLOOM button, whatever A CH4 is called. The last column is the effect each section has switched on when you recall the channel. Hold PANEL while switching on to bring all eight back.

From BOSS's KATANA Gen 3 Reference Manual, pages 12 to 14. The effects BOSS prints in bold are the ones that turn on when the tone setting is recalled.
Tone settingBOSS's nameOn when recalled: Booster, Mod, FX, Delay, Reverb
A CH1Chunky BrownTREBLE BST, PHASER 90E, FLNGR 117E, SDE-3000, HALL
A CH2Picking PushedCLEAN BST, T.WAH, TREMOLO, TAPE ECHO, SPRING
A CH3Riff ShredDISTORTION, PHASER 90E, HEAVY OCT, DIGITAL, HALL
A CH4Bloom CrunchBLUES DRIVE, FLNGR 117E, HEAVY OCT, ANALOG, PLATE
B CH1Sparkle CleanBLUES DRIVE, CHORUS, TREMOLO, TAPE ECHO, PLATE
B CH2Church BrownCLEAN BST, COMP, PITCH SHIFT, MODULATE, HALL
B CH3Spongy CrunchCLEAN BST, DC-30, PITCH SHIFT, MODULATE, PLATE
B CH4Bite LeadTREBLE BST, COMP, FLNGR 117E, SDE-3000, PLATE

Boss Katana 100 Gen 3 booster list

23 types for the Booster, picked in BOSS Tone Studio, from clean boosts to fuzz, with the pedals BOSS says it models. On the amp, each of the BOOSTER button's three colours holds one of them and the outer ring of the BOOSTER/MOD knob sets how much you hear.

From BOSS's Using BOSS TONE STUDIO for KATANA Gen3, pages 17 and 18, shortened. BOSS uses the other makers' names only to explain the sounds it models.
Booster typeWhat BOSS says it is
CLEAN BOOSTA booster that also gives a clean tone with punch on its own
TREBLE BOOSTA booster with bright characteristics
MID BOOSTA booster with unique characteristics in the midrange, suited to solos before the preamp
CRUNCH ODA lustrous crunch sound with an added element of amp distortion
BLUES DRIVEThe crunch sound of the BOSS BD-2, faithful to the nuances of picking
OVERDRIVEModels the BOSS OD-1, sweet, mild distortion
NATURAL ODAn overdrive with distortion that has a natural feeling
WARM ODA warm overdrive
TURBO ODThe high-gain overdrive sound of the BOSS OD-2
T-SCREAMModels an Ibanez TS-808
DISTORTIONA basic, traditional distortion sound
FAT DSA distortion sound with thick distortion
DST+Models an MXR Distortion+
GUV DSModels a Marshall Guv'nor
RATModels a ProCo RAT
METAL ZONEModels the BOSS MT-2, from old style to slash metal
METAL DSA distortion sound ideal for heavy riffs
'60S FUZZModels a Fuzz Face, a fat fuzz sound
MUFF FUZZModels an Electro-Harmonix Big Muff
OCT FUZZA fuzz sound with rich harmonic content
HM-2Models the BOSS HM-2, cranked-up distortion with compression
METAL COREModels the BOSS ML-2, for high-speed metal riffs
CENTA ODModels a Klon Centaur

Boss Katana 100 Gen 3 effects list

31 types for MOD and FX, which share one list, 8 delays, 5 reverbs and 3 pedal effects for an expression pedal, on top of the 23 boosters, plus a parametric EQ, a GE-10 graphic EQ and a noise suppressor that are set only in BOSS Tone Studio. The Delay 2 slot, heard on the REVERB knob when its mode is DELAY or DLY+REV, takes the same 8 delays.

From BOSS's Using BOSS TONE STUDIO for KATANA Gen3, pages 18 to 27, shortened. BOSS uses the other makers' names only to explain the sounds it models.
EffectBlockWhat BOSS says it does
CHORUSMOD or FXTwo choruses, one for the lows and one for the highs, for a more natural chorus
FLANGERMOD or FXA twisting, jet-airplane-like character
PHASERMOD or FXA whooshing, swirling character
UNI-VMOD or FXModels a Uni-Vibe
TREMOLOMOD or FXA cyclic change in volume
VIBRATOMOD or FXVibrato from slightly modulating the pitch
ROTARYMOD or FXLike the sound of a rotary speaker
RING MODMOD or FXA bell-like sound from the internal oscillator
SLOW GEARMOD or FXA volume swell, the violin-like sound
SLICERMOD or FXInterrupts the sound so it sounds like a rhythm backing phrase
COMPMOD or FXA long sustain from evening out the volume level
LIMITERMOD or FXAttenuates loud input levels to prevent distortion
T. WAHMOD or FXA wah whose filter follows the guitar level
AUTO WAHMOD or FXA wah that changes over a periodic cycle
PEDAL WAHMOD or FXA wah played from an expression pedal on a GA-FC
GRAPHIC EQMOD or FXTen-band EQ
PARAMETRIC EQMOD or FXFour-band EQ
GUITAR SIMMOD or FXSwitches between guitar types, pickups and bodies on one guitar
AC.GUITAR SIMMOD or FXTurns an electric guitar into the sound of an acoustic
AC. PROCESSORMOD or FXMakes an acoustic-electric's pickup sound closer to a mic near the guitar
WAVE SYNTHMOD or FXA synth sound from the guitar input
OCTAVEMOD or FXAdds a note an octave lower
HEAVY OCTAVEMOD or FXAdds sound an octave lower, chords included
PITCH SHIFTERMOD or FXShifts the pitch up or down within two octaves
HARMONISTMOD or FXHarmonies based on diatonic scales
HUMANIZERMOD or FXHuman vowel-like sounds
PHASER 90EMOD or FXModels an MXR EVH-90 Phase Shifter
FLANGER117EMOD or FXModels an MXR EVH-117 Flanger
WAH 95EMOD or FXModels a Jim Dunlop EVH-95 Wah, played from an expression pedal
DC-30MOD or FXModels a Roland DC-30
PEDAL BENDMOD or FXPitch bend from an expression pedal
DIGITALDelayA simple mono delay
PANDelayA tap delay, the time divided across left and right
STEREODelayA stereo in and out delay
ANALOGDelayA mild analog delay sound
TAPE ECHODelayThe wavering sound of a tape echo
REVERSEDelayThe sound played back in reverse
MODULATEDelayAdds a pleasant wavering to the delay
SDE-3000DelayModels the Roland SDE-3000
PLATEReverbA plate reverb: metallic, with a distinct upper range
ROOMReverbA small room: warm reverberation
HALLReverbA concert hall: clear and spacious
SPRINGReverbA guitar amp's built-in spring reverb
MODULATEReverbHall reverb with a wavering sound
PEDAL WAHPedal FXWah in six modes, CRY WAH and VO WAH among them, modelled on a Cry Baby and a VOX V846
WAH 95EPedal FXModels a Jim Dunlop EVH-95
PEDAL BENDPedal FXA pitch-bend effect; chords cannot be played through it

What controls does the Boss Katana 100 Gen 3 have?

The Boss Katana 100 Gen 3 has 19 controls on its front panel: Amp Type knob, Variation button, Gain, Volume, Contour button, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Presence, Master, Solo button, Power Control switch and Cab Resonance switch.

Boss Katana 100 Gen 3 specifications

Power
100W, with Half and 0.5W settings
Speaker
1x12"
Voicings
Acoustic, Clean, Pushed, Crunch, Lead, Brown
Front panel
Amp Type knob, Variation button, Gain, Volume, Contour button, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Presence, Master, Solo button, Power Control switch, Cab Resonance switch
Released
2024

What the Boss Katana 100 Gen 3 panel means when you dial it in

100W, with Half and 0.5W settings through a 1x12". There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. It has a presence control, so the top end above the treble band is set separately from the tone stack. That is the control to reach for when a setting sounds close but harsh. A resonance control shapes the definition of the low end on a knob of its own, apart from the bass knob, so the two are set separately. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. Reverb is onboard, so a tone that needs it does not need a pedal in the chain. The selectable voicings are Acoustic, Clean, Pushed, Crunch, Lead and Brown. Picking the voicing comes before the knob positions, because the same numbers land somewhere else on each one.

Boss Katana 100 Gen 3 questions

What is the difference between the Katana 100 Gen 3 and the Katana 50 Gen 3?

Twice the power, 100 watts against 50, still into one 12-inch speaker, and a fuller panel. BOSS's Gen 3 manual gives the 100 a PRESENCE knob, the three-way CONTOUR button, a SOLO button and CH3 and CH4, so it stores eight tone settings to the 50's four, plus an effects loop, a LINE OUT, a GA-FC jack and STEREO EXPAND for a second amp; BOSS's specifications add a CAB RESONANCE switch. Both have the same six amp types, five effect sections and Power Control. The 100 weighs 14.8 kg, the 50 11.6 kg.

What is the difference between the Katana 100 Gen 3 and the Katana Artist Gen 3?

Both are 100-watt combos with one 12-inch speaker, the same six amp types, Presence, Contour, Cab Resonance, Solo, eight tone settings, an effects loop and Stereo Expand. The Artist adds BLOOM, a RESONANCE knob, Solo Level and Solo Delay knobs with their own tap button, a BANK button, an XLR line out with AIR FEEL and GND LIFT switches, a GLOBAL EQ button, MIDI IN and speaker outputs for external cabinets, and BOSS names a custom 12-inch Waza speaker for it. The Artist weighs 19 kg against the 100's 14.8 kg.

Does the Katana 100 Gen 3 have Cab Resonance?

Yes. BOSS's product page lists three cabinet resonance options, Vintage, Modern and Deep, and the KATANA-100 specifications in BOSS's Gen 3 manual and on its website list a CAB RESONANCE switch. One panel page of the same manual marks the switch for the 100/212, the Head and the Artists only, which those specifications contradict. VINTAGE is the warm and sweet sound of a vintage cabinet, MODERN a modern cabinet sound notable for a tight low-end, and DEEP a powerful low end with a distinctive edge.

What amp types does the Boss Katana 100 Gen 3 have?

Six, each with a second voicing on the VARIATION button, so twelve: ACOUSTIC, CLEAN, PUSHED, CRUNCH, LEAD and BROWN, the same six as every Katana Gen 3. BOSS's manual says all provided amp types are original and names no real amp behind them. It describes Pushed as a big, penetrating sound that responds to your picking, Crunch as a fat crunch sound, Lead as covering crunch to high gain depending on the gain setting, and Brown as a lead sound with an edge inherited from the BOSS WAZA brown sound.

What does the Contour button do on the Katana 100 Gen 3?

It switches between three types of midrange band characteristics, green, red and orange, to change the sonic definition of the sound. Each press moves to the next one in order, green, red, orange and then off. BOSS's product page says BOSS Tone Studio can fine-tune the three Contour settings. The Katana 50 Gen 3 has no Contour button.

How does the Solo button work on the Katana 100 Gen 3?

SOLO switches the solo function on and off. The 100 has no Solo Level knob: in BOSS Tone Studio, SOLO LEVEL, from 0 to 100, sets the volume while Solo is on, and a three-band SOLO EQ shapes the solo sound before or after the preamp. A latching footswitch's ring on the GA-FC jack turns Solo on and off. Solo Delay, with its own knob and tap button, is on the Artist and the Artist Head only.

How do you save a sound on the Katana 100 Gen 3?

Press and hold CH1, CH2, CH3 or CH4 for one second. The channel stores every top panel knob and button except MASTER, which is why VOLUME is the control for balancing sounds and MASTER the one for the room. There are two banks, A and B, so the 100 holds eight tone settings: to change bank, hold PANEL for about one second while a channel is selected, and PANEL blinks slowly on bank B. PANEL itself plays whatever the knobs are set to now.

What does the Power Control switch do on the Katana 100 Gen 3?

It sets the output level of the power amp for where you are playing: 0.5 W, HALF or MAX. STANDBY mutes the sound while leaving the unit powered on, so you can leave the stage without changing a knob. At home, use 0.5 W rather than turning MASTER almost to zero. Adjusting the HALF position in BOSS Tone Studio is for the Artist and the Artist Head only.

Does the Katana 100 Gen 3 have a built-in tuner?

No. BOSS's Gen 3 manual and its BOSS Tone Studio manual describe no tuner, and the 100's specifications list none. Use a pedal or clip-on tuner before the INPUT jack.

Can you record with the Katana 100 Gen 3?

Yes, three ways. USB-C records to a computer, at up to 32-bit/96 kHz with BOSS's KATANA3 driver, which also carries MIDI for BOSS Tone Studio, or 16-bit/48 kHz audio only with the operating system's own driver, which needs system program 1.07 or later. The 1/4-inch LINE OUT feeds a recorder or a PA, its level set by VOLUME, not MASTER. STEREO PHONES works for silent practice. BOSS Tone Studio's LINE OUT AIR FEEL setting picks the sound of all three: REC, LIVE, BLEND or a CUSTOM mic setup.

Does the Katana 100 Gen 3 have Bluetooth?

Not built in. The optional BT-DUAL adaptor fits the Bluetooth ADAPTOR jack on the rear panel, after removing its cover and screw with the amp unplugged. It then plays music from a phone through the amp, shown on the phone as KATANA 3 Audio, and lets the BOSS Tone Studio app for iOS and Android edit the sounds. Set the music level on the phone, then with MASTER.

What footswitches and pedals work with the Katana 100 Gen 3?

BOSS's GA-FC and GA-FC EX foot controllers switch tone settings and effects from the GA-FC jack, which also takes a latch-type FS-5L, or an FS-6 or FS-7 set to FS-5L (LATCH), to switch CH1 and CH2 with its tip and Solo with its ring; momentary footswitches such as the FS-5U cannot be used there. The EXP PEDAL jack takes an EV-30, FV-500L, FV-500H or Roland EV-5 for volume or an effect such as wah. The 100 has no MIDI IN.

Can you connect an external speaker cabinet to the Katana 100 Gen 3?

No. BOSS's manual says the KATANA-100 and KATANA-100/212 have no SPEAKER OUT jack; the Katana Head and the two Artists have one. For more sound in a big room, send LINE OUT to a PA, or link a second Katana with STEREO EXPAND.

Can you run two Katana 100 Gen 3 amps in stereo?

Yes, with STEREO EXPAND. Connect the LINE OUT jack of the amp your guitar is plugged into to the POWER AMP IN jack of the second, and turn the STEREO EXPAND switch ON on both. BOSS's product page says the main amp then has master control, with stereo effects like chorus, delay and reverb spread across both; on the second amp only MASTER and POWER CONTROL respond. BOSS supports it on every Katana Gen 3 and MkII except the Katana-50 Gen 3 and the Katana-50 MkII.

What are the factory tone settings on the Katana 100 Gen 3?

BOSS's Gen 3 manual prints one set of eight. Bank A: CH1 Chunky Brown, CH2 Picking Pushed, CH3 Riff Shred, CH4 Bloom Crunch. Bank B: CH1 Sparkle Clean, CH2 Church Brown, CH3 Spongy Crunch, CH4 Bite Lead. The 100 has no BLOOM button, whatever A CH4 is called. The effects each one switches on are in the list below. Holding PANEL while switching on brings them back.

How do you factory reset the Katana 100 Gen 3?

With no other devices connected, switch the amp on while holding down PANEL. The EFFECTS buttons blink one after another from the left; when the blinking stops, all settings are back to the factory state. It takes about 30 seconds, and the power must stay on until it finishes. Back up your own sounds first with ALL DATA BACKUP in BOSS Tone Studio.

What is the latest firmware for the Katana 100 Gen 3?

BOSS's Katana-100 Gen 3 support page lists KATANA3 System Program Ver.1.07, from October 2024, which added support for the USB generic driver and fixed a Harmonist pitch detection bug; Ver.1.06, from May 2024, added support for BOSS Tone Studio. To check yours, hold REVERB while switching on: on 1.07 BOOSTER lights green, MOD and FX stay dark, DELAY lights green and REVERB orange.

What are the best Boss Katana 100 Gen 3 settings for metal?

Start with the LEAD or BROWN amp type, Gain 6 to 7, Bass 5 to 6, Middle around 5, Treble 6 to 7, Presence 5 to 6 and Reverb 1 or off, with CAB RESONANCE on MODERN and MID BST from the Booster in front rather than Gain at 10. These are starting points, not BOSS's numbers: move one control at a time from here. If it fizzes, lower Gain first, then Presence, then Treble.

When did the Boss Katana 100 Gen 3 come out?

BOSS announced the Katana Gen 3 range in a press release dated 23 May 2024, which said the Katana-50 Gen 3, Katana-100 Gen 3 and Katana-100/212 Gen 3 were available now from authorised US BOSS retailers and the rest of the lineup would follow later that year. BOSS describes the 100 as big, stage-ready sound in an easy-to-carry 1x12 combo.

Is there a printable Boss Katana 100 Gen 3 settings cheat sheet?

Yes. The cheat sheet on this page puts the four starting settings on one page, from clean to metal, each with its amp type, and short tips under them. Download the PDF to print it on white, or save the PNG to your phone.

Does Tonelify support the Boss Katana 100 Gen 3?

Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Amp Type knob, Variation button, Gain, Volume, Contour button, Bass, Middle, Treble, Booster, Mod, FX, Delay, Tap button, Reverb, Presence, Master, Solo button, Power Control switch, Cab Resonance switch. You will not be told to set a knob that is not there.

Sources

Panel, specifications and dates checked against these on .

The manuals are the files BOSS's Katana Gen 3 support pages link, read on 7 November 2026; the Reference Manual covers all seven Gen 3 amps and marks what only some models have. Its panel page marks CAB RESONANCE for the 100/212, Head and Artists only, while its own KATANA-100 specifications and BOSS's product page, read on 14 November 2026, list the switch on the 100, and this page follows those two.

More Boss gear

Similar amps from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for the controls the Boss Katana 100 Gen 3 has. A first plan starts with 7 days free, $0 today.