Ibanez TS808 Tube Screamer settings
Ibanez's reissue of the TS808 Overdrive Pro from the late 1970s, with the JRC 4558D chip and Overdrive, Tone and Level knobs.
⚡ Match a tone on this pedal- Overdrive
- Tone
- Level
How do you dial in a specific tone on an Ibanez TS808 Tube Screamer?
A drive pedal is not an amount of gain, it is a shape. The Ibanez TS808 Tube Screamer changes what reaches the amp's input, so where it sits in the chain and how the amp is set behind it matter as much as the pedal's own controls. Settings here cover both ends: the pedal, and the amp underneath it.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.
Starting settings on the Ibanez TS808 Tube Screamer
Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Ibanez's numbers: move one control at a time from here.
Boost for a high-gain amp
Overdrive 0 to 2, Tone 5 to 6, Level 7 to 10, in front of the amp's high-gain channel. Here the amp makes the distortion and the pedal pushes its input harder, so take the amp's own gain down a step before adding more. If palm mutes turn to mush, this is the first thing to try.
- Overdrive 0 to 2
- Tone 5 to 6
- Level 7 to 10
The amp makes the distortion; the pedal pushes it.
Blues and classic rock crunch
Overdrive 4 to 6, Tone 5 to 6, Level at unity or slightly above, into a clean amp turned up to just before it breaks up. Ibanez's Japanese product page credits the TS808 with a midrange that has body and a soft distortion that is never too harsh, so let the guitar's volume do the work: back to 7 or 8 for rhythm, up to 10 for a lead.
- Overdrive 4 to 6
- Tone 5 to 6
- Level unity
Level at unity or slightly above, into a clean amp just before breakup.
Lead
Overdrive 6 to 7, Tone 5 to 6, Level a little above unity, so the solo comes up over the rhythm. If the lead turns thin or harsh, bring Tone down before Overdrive.
- Overdrive 6 to 7
- Tone 5 to 6
- Level above unity
Into a loud clean amp
Overdrive 2 to 3, Tone about 6, Level 7 to 8, into a clean amp that is already loud, with its bass kept back. The pedal pushes an amp that is already working hard rather than making the distortion by itself, and heavy strings help as much as any setting.
- Overdrive 2 to 3
- Tone about 6
- Level 7 to 8
Chasing one song? Name it and the matcher writes that song's settings for the Ibanez TS808 Tube Screamer.
What controls does the Ibanez TS808 Tube Screamer have?
The Ibanez TS808 Tube Screamer has 3 controls on its front panel: Overdrive, Tone and Level.
Ibanez TS808 Tube Screamer specifications
- Front panel
- Overdrive, Tone, Level
What the Ibanez TS808 Tube Screamer panel means when you dial it in
Its controls are Overdrive, Tone and Level, and settings for this pedal are written against those names rather than a generic level, tone and gain.
Ibanez TS808 Tube Screamer questions
When did the TS808 Tube Screamer come out?
Ibanez's Japanese product page says the original TUBESCREAMER Overdrive Pro TS808 went on sale outside Japan in the late 1970s, and it is in Ibanez's 1979 electronics catalogue as the TS-808. The TS808 on sale today is Ibanez's reissue of it.
What chip is in the TS808?
Ibanez's product page says the reissue includes the JRC 4558D IC chip and analogue circuitry, with the traditional Overdrive, Tone and Level controls.
What is the difference between the TS808 and the TS9?
Ibanez publishes few figures for either. Its 1979 and 1982 catalogues gave the original TS-808 and TS9 the same 500K ohm input impedance, 30 dB of maximum gain and 0 dBm of maximum output, and both reissues draw 8 mA at 9 V on Ibanez's pages today. Ibanez names the JRC 4558D IC chip only on the TS808 reissue's page, and the TS808's first knob is called Overdrive where the TS9's is Drive.
Why do old catalogues list a Balance knob on the TS-808?
Ibanez's 1979 catalogue lists the TS-808's controls as Overdrive, Balance and Tone, with a Normal/Effect FET electronic switch. On the reissue Ibanez names the three knobs Overdrive, Tone and Level.
What power does the TS808 need?
One 9 V battery (006P) or a 9 V DC adaptor, centre negative, per Ibanez's product page. It draws 8 mA at 9 V, and Ibanez includes a converter cable, which its Japanese page says is for a 1/8-inch mini plug.
How big is the TS808?
Ibanez's current page gives no size or weight. Its 1979 catalogue gave the original TS-808 as 120 by 70 by 55 mm and 300 g.
Where does the Ibanez TS808 Tube Screamer go in the signal chain?
In front of the amp input, before any time-based effects. Drive pedals interact with what the amp is already doing, so the amp's own gain setting is part of the answer and cannot be ignored when the pedal is dialled in.
Does Tonelify support the Ibanez TS808 Tube Screamer?
Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Overdrive, Tone, Level. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
More Ibanez gear
Similar pedals from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Ibanez TS808 Tube Screamer in it. A first plan starts with 7 days free, $0 today.