Tonelify
Black Friday40% off yearly
PedalOverdrive

Boss BD-2 Blues Driver settings

⚡ Match a tone on this pedal
Front panel3 controls
  • Level
  • Tone
  • Gain
The controls on the Boss BD-2 Blues Driver, drawn in a row rather than in the real panel layout.

How do you dial in a specific tone on a Boss BD-2 Blues Driver?

A drive pedal is not an amount of gain, it is a shape. The Boss BD-2 Blues Driver changes what reaches the amp's input, so where it sits in the chain and how the amp is set behind it matter as much as the pedal's own controls. Settings here cover both ends: the pedal, and the amp underneath it.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Boss BD-2 Settings Cheat Sheet: knob positions for crunch, american blues, british blues, turbo od, booster and clean crunch on one page

Free download

Printable cheat sheet: PDF and PNG

The crunch, american blues, british blues, turbo od, booster and clean crunch settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.

Starting settings on the Boss BD-2 Blues Driver

Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Boss's numbers: move one control at a time from here.

Crunch

Level 10:30, Tone 1:30, Gain 12:30. The first of BOSS's Setting Samples, read from BOSS's drawing to the nearest half hour. BOSS's manual says the BD-2 was designed specifically for crunch distortion, and that turning Gain clockwise increases the gain for harder distortion. Tone past noon gives the sharper sound with emphasized treble that BOSS describes for clockwise.

BOSS's sampleBD-2 crunch
  • Level 10:30
  • Tone 1:30
  • Gain 12:30

Read from BOSS's drawing, to the nearest half hour.

American Blues

Level 10:30, Tone 12:00, Gain 1:30, read from BOSS's drawing to the nearest half hour. A little more gain than Crunch with Tone flat in the middle. BOSS's product page says the circuit is highly responsive to picking dynamics and guitar volume changes: play softly for a cleaner note and dig in for more drive, and turn the guitar's volume down to clean up.

BOSS's sampleBD-2 American blues
  • Level 10:30
  • Tone 12:00
  • Gain 1:30

Read from BOSS's drawing, to the nearest half hour.

British Blues

Level 10:30, Tone 10:30, Gain 3:30, read from BOSS's drawing to the nearest half hour. Much more gain with the highs pulled back: BOSS's manual says turning Tone counterclockwise gives a soft sound with cut treble. BOSS's product page says the tone gets fatter and more saturated as you crank the gain, mimicking the behavior of a vintage tube amp.

BOSS's sampleBD-2 British blues
  • Level 10:30
  • Tone 10:30
  • Gain 3:30

Read from BOSS's drawing, to the nearest half hour.

Turbo OverDrive

Level 10:30, Tone 9:00, Gain 3:00, read from BOSS's drawing to the nearest half hour. High gain with Tone well down, for a thick, dark lead. BOSS's article comparing the DS-1, SD-1 and BD-2 says the BD-2 has a surprising amount of gain on tap, from barely-there clean boost to near-fuzz territory. If the lead loses its edge in the band, bring Tone up towards noon.

BOSS's sampleBD-2 turbo overdrive
  • Level 10:30
  • Tone 9:00
  • Gain 3:00

Read from BOSS's drawing, to the nearest half hour.

Booster

Level 3:30, Tone 10:30, Gain 8:30, read from BOSS's drawing to the nearest half hour. Gain low and Level high, to push an amp or a pedal after it. BOSS's product page says the BD-2's transparent voice excels as a full-range boost for pushing downstream drive pedals and high-gain amps into fierce distortion while keeping definition and clarity.

BOSS's sampleBD-2 booster
  • Level 3:30
  • Tone 10:30
  • Gain 8:30

Read from BOSS's drawing, to the nearest half hour.

Clean Crunch

Level 10:30, Tone 5:00, Gain 7:00, read from BOSS's drawing: Tone all the way up and Gain all the way down. The lightest edge of breakup with all the treble, for chords and arpeggios. BOSS's product page says lower gain settings produce a mild breakup that is ideal for defined chord work, arpeggio playing and adding body to lead lines. With Tone this high, a bright amp may need its treble down.

BOSS's sampleBD-2 clean crunch
  • Level 10:30
  • Tone 5:00
  • Gain 7:00

Tone full up, Gain full down, per BOSS's drawing.

Chasing one song? Name it and the matcher writes that song's settings for the Boss BD-2 Blues Driver.

Match a song to this pedal7 days free, $0 today

What controls does the Boss BD-2 Blues Driver have?

The Boss BD-2 Blues Driver has 3 controls on its front panel: Level, Tone and Gain.

Boss BD-2 Blues Driver specifications

Front panel
Level, Tone, Gain
Released
1995

What the Boss BD-2 Blues Driver panel means when you dial it in

Its controls are Level, Tone and Gain, and settings for this pedal are written against those names rather than a generic level, tone and gain.

Boss BD-2 Blues Driver questions

What does the Gain knob on the Boss BD-2 do?

BOSS's manual says it adjusts the gain of the Blues Driver: turning it clockwise increases the gain for harder distortion. BOSS's product page says the range runs from a transparent clean boost to aggressive overdrive.

What does the Tone knob on the BD-2 do?

BOSS's manual says turning it clockwise gives a sharp sound with emphasized treble, and counterclockwise a soft sound with cut treble. It shapes the highs, so on a dark amp turn it up and on a bright amp turn it down.

What does the Level knob on the BD-2 do?

It sets the volume of the effect. BOSS's manual adds that with the knob turned fully counterclockwise no sound is heard, so if the pedal goes silent when you switch it on, check Level first.

What are BOSS's Setting Samples for the BD-2?

BOSS's owner's manual draws eight: Crunch, American Blues, British Blues, Booster, OverDrive, Chord Play, Turbo OverDrive and Clean Crunch. Read from the drawing to the nearest half hour, OverDrive is Level 10:30, Tone 8:30 and Gain 11:30, and Chord Play is Level 10:30, Tone 1:30 and Gain 10:30. Six of the eight are drawn on this page.

Can you use the BD-2 as a clean boost?

Yes. BOSS's product page says its gain range runs from a transparent clean boost to aggressive overdrive, and that it excels as a full-range boost for pushing drive pedals and high-gain amps after it. BOSS's Booster sample sets Level high and Gain low.

Does the BD-2 clean up with the guitar volume?

Yes. BOSS's manual says a clean, natural sound comes back when you turn down the guitar's volume, even with Gain raised. BOSS's Blues Driver article quotes The BOSS Book calling the BD-2 the first effect that allowed you to control the distortion using the volume control on the guitar.

Can the BD-2 be left on all the time?

BOSS's product page says many players use it as an always-on pedal to shape their core sound: a soft touch gives a harmonic bloom around the notes, and a hard attack a sharp but smooth tone that cuts through the band.

What is the difference between the BD-2, DS-1 and SD-1?

BOSS's article comparing the three says the BD-2 sits between the SD-1 and the DS-1: it has a stiffer attack than an SD-1, and a brighter, more scooped sound. It also says the BD-2 has a surprising amount of gain on tap, from barely-there clean boost to near-fuzz.

What is the difference between the BD-2 and the BD-2W?

BOSS's Blues Driver article says the BD-2W appeared in 2014 with the Japanese-made Waza Craft pedals, and that it has a Custom/Standard mode switch which takes the Blues Driver sound further while keeping the character of the original circuit.

What is the BOSS JB-2 Angry Driver?

BOSS's Blues Driver article says the JB-2, released in 2017 with JHS, combines the Blues Driver with JHS's Angry Charlie in one pedal. It has three dual-concentric knobs for the Level, Tone and Drive of each, and a six-way mode switch for both in series, in parallel or one at a time.

When did the Boss BD-2 come out?

In 1995. BOSS's product page says it has been in continuous production since 1995, and that its multi-stage clipping circuit was designed to reproduce the gain and compression of a tube amp.

Who uses the Boss BD-2 Blues Driver?

BOSS's Blues Driver article names Leslie West, Randy Bachman, Prince, Malina Moye, Billy Duffy, Robert Smith, Jim Fairchild, Kazu Makino, Mike Stern and Steve Vai among its fans.

How long does a battery last in the BD-2?

BOSS's manual gives about 24.5 hours of continuous use on a carbon battery and 44 hours on an alkaline one, with a current draw of 20 mA. The INPUT jack doubles as the power switch, so unplug the cable when you stop. It also takes a BOSS PSA series adaptor, sold separately.

How big and heavy is the Boss BD-2?

73 mm wide, 129 mm deep and 59 mm high, and 360 g with its battery, per BOSS's manual. The input impedance is 1 M ohm and the output impedance 1 k ohm.

Where does the Boss BD-2 Blues Driver go in the signal chain?

In front of the amp input, before any time-based effects. Drive pedals interact with what the amp is already doing, so the amp's own gain setting is part of the answer and cannot be ignored when the pedal is dialled in.

Does Tonelify support the Boss BD-2 Blues Driver?

Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Level, Tone, Gain. You will not be told to set a knob that is not there.

Sources

Panel, specifications and dates checked against these on .

Every panel is one of BOSS's Setting Samples from the BD-2 owner's manual; the clock positions are read from BOSS's drawing to the nearest half hour. The descriptions of each setting tie BOSS's own words to it and are Tonelify's.

More Boss gear

Similar pedals from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Boss BD-2 Blues Driver in it. A first plan starts with 7 days free, $0 today.