Kemper Profiler presets and settings
Profiling amp: it captures a real rig as a profile rather than modelling a fixed list, and the six amp-style knobs adjust the captured profile.
⚡ Match a tone on this unit- Gain
- Bass
- Middle
- Treble
- Presence
- Rig Volume
How do you dial in a specific tone on a Kemper Profiler?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the Kemper Profiler name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.
Which Kemper parameter to turn
The sound you hear, the Kemper parameter that changes it, and where to start. What each parameter does is from Kemper's Main Manual 14.2; the first move is Tonelify's, made from the Rig's stored setting.
| You hear | Turn | Tonelify's first move |
|---|---|---|
| Too much or too little distortion | Gain | Change Gain first; the level stays the same |
| High gain chords sound muddy | Clarity | Turn Clarity to the right a little |
| Notes lose their attack | Pick | Raise Pick a little; lower it to soften |
| Crunch feels flat to play | Power Sagging | Raise it in small steps, below 50% |
| Amp sounds too old or too modern | Definition | Move it a little either way and compare |
| Clean Rigs quieter than distorted | Clean Sens | Raise Clean Sens, not Rig Volume |
| Too bright or too dark | Treble, Presence | Start both in the middle, then move one |
| One Rig too loud for a song | Rig Volume | Change it and store the Rig |
Kemper amplifier module parameters
The parameters on the AMPLIFIER button's pages, with what Kemper's Main Manual says each one does.
| Parameter | What it does |
|---|---|
| Definition | The characteristic fingerprint of the preamp, from vintage to modern |
| Power Sagging | Energy of crunch sounds; 0% keeps the profile's dynamics |
| Pick | Level and sharpness of the pick attack; negative softens it |
| Compressor | Amp circuit compression that boosts only clean signals |
| Clarity | Brings the clean character into focus without less distortion |
| Tube Shape | Soft to hard distortion; 3 for preamp tubes, around 9 for power tubes |
| Tube Bias | Overtone structure; higher breaks up earlier |
| Direct Mix | Mixes a clean portion of the guitar into the distorted sound |
| Clean Compensation | Keeps the volume level as gain goes down; most profiles at maximum |
| Volume | Balances volume gaps between profiles |
| Bass, Middle, Treble, Presence | Tone stack; all in the middle leaves the profile unaltered |
What controls does the Kemper Profiler have?
The Kemper Profiler has 6 controls on its front panel: Gain, Bass, Middle, Treble, Presence and Rig Volume.
Kemper Profiler specifications
- Front panel
- Gain, Bass, Middle, Treble, Presence, Rig Volume
What the Kemper Profiler panel means when you dial it in
Its controls are Gain, Bass, Middle, Treble, Presence and Rig Volume, and settings for this multi-effects unit are written against those names rather than a generic level, tone and gain.
Kemper Profiler questions
What is a Kemper profile?
A capture of a real amp. Kemper says PROFILING extracts the tone and feel of an amp, takes about a minute, and captures not only the amp but every aspect of the cabinet and microphone configuration as well. Kemper also says the Profiler has no predefined amp models and therefore no signature sound: the model is the PROFILE.
Where should I start the EQ on a Kemper Profiler?
In the middle. Kemper's Main Manual says that when all the EQ soft knobs, Bass, Middle, Treble and Presence, are in the middle position, the EQ does not change the sound, so what you hear is the unaltered sound of the PROFILE. Move away from the middle only to fix something you hear.
What does the Gain knob do on a Kemper?
It sets the amount of distortion, from ultra-clean to totally distorted. Kemper's manual says Gain gives the same large range on all PROFILEs, even if the original amp had a more limited range, and that it always compensates for the loss in level: at zero you get an undistorted sound with the same perceived loudness as the fully distorted one. On a Liquid Profile, Gain follows the original amp's range instead.
What is a Kemper Liquid Profile?
A PROFILE with an Amp Model added. Kemper's manual says a regular PROFILE uses a generic gain control and tone stack, shown as the Amp Model Kemper Generic, while a Liquid Profile's Bass, Middle, Treble and Presence work and sound like the controls of the original amp, and its Gain mirrors the range of the original gain potentiometer.
Why are my clean Kemper Rigs quieter than my distorted ones?
Usually your guitar's output level. Kemper's manual says to adjust Clean Sens in the Input Section until clean sounds have the same perceived loudness as distorted sounds, and not to fix it with the volume of each Rig. Clean Sens sets the volume of clean sounds but not how the amp is driven.
What is the difference between Rig Volume and Master Volume on a Kemper?
Rig Volume is stored with each Rig; Master Volume sets the overall level of the Profiler. Kemper's manual says all factory Rigs come with Rig Volume at the center position, the unity volume, that Rig Volume changes only the volume and not the character, and that it is meant to suit a Rig to a song in a set list rather than to balance all your Rigs.
What does Definition do on a Kemper?
Kemper's manual says Definition controls the characteristic fingerprint of the preamp, and that PROFILING sets it to a value that represents the reference amp. You can use it to modernize the profile of a vintage amp, to give a modern amp a more vintage sound when driven into distortion, or to match your guitar to the amp.
What does Clarity do on a Kemper?
Kemper's manual says turning Clarity to the right brings the clean character of the sound into focus without lowering the amount of distortion, and the distortion becomes less forward in the mid frequencies and far more transparent. It is the parameter to try when a high gain Rig sounds muddy in chords.
What does the Pick parameter do on a Kemper?
It sets the level and sharpness of the pick attack apart from the sustained part of the sound, whatever the amount of distortion. Kemper's manual says it can make clean sounds more percussive without a compressor, revive the attack of notes lost in heavy distortion, and that a negative value softens the attack for a more fluid sound.
What does Power Sagging do on a Kemper?
Kemper's manual says it models the interaction between the guitar signal and the distortion stage, and that raising it brings out the velocity and energy of crunch sounds without raising the perceived volume. Beyond 50% it goes past what an analog tube amp can do, at 0% the original dynamic range of the PROFILE is kept, and it has only a minor effect on fully distorted and clean sounds.
What Tube Shape setting should I use on a Kemper?
Kemper's manual gives two values: set Tube Shape to 3 for the typical sound of preamp tubes, and to around 9 for a power amp tube character, which distorts harder. It adds that the effect can be subtle, and that completely distorted and clean sounds are mostly unaffected.
Should the Kemper EQ be before or after the amp?
Either works. Kemper's manual says the EQ position soft button, on the last page of the amplifier module, sets it to Post or Pre, and that most modern amps with a master volume distort in the preamp, so the EQ sits after the distortion, while classic amps without a master volume such as a Vox AC30 distort in the power amp, so the EQ sits before it. It adds that matching the original amp is not mandatory.
How do I save changes on a Kemper Profiler?
Press STORE. Kemper's manual says Store in Browser Mode offers Replace, which overwrites the current Rig and keeps its name, Store as, which saves under a new name and keeps the original, and Rename. With a module in focus you can store a preset of that module instead of the whole Rig.
How many Rigs does a Kemper Performance hold?
Five. Kemper's manual says Performance Mode offers 125 Performances, each with five Slots, for up to 625 Rigs apart from your browse pool, for example one Slot each for the intro, verse, refrain, bridge and solo of a song.
How many Rigs come with the Kemper Profiler?
Kemper says the Profiler ships with a wide selection of Rigs pre-installed, and that more than 1400 Rigs come bundled in its free Rig Manager software. More are shared by users on Kemper's Rig Exchange.
How do you build a patch on the Kemper Profiler?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the Kemper Profiler?
Yes, and its front panel is stored, so settings only ever reference controls this multi-effects unit has: Gain, Bass, Middle, Treble, Presence, Rig Volume. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
What each parameter does, the Tube Shape values and the Performance counts are from Kemper's Main Manual 14.2, dated 23 July 2026 on Kemper's downloads page; the profiling text and the Rig count from Kemper's Profiler overview. The first moves are Tonelify's, not Kemper's: a Kemper's sound depends on the PROFILE loaded, so Kemper gives no knob settings per style.
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Kemper Profiler in it. A first plan starts with 7 days free, $0 today.