Fractal Audio AM4 presets and settings
Fractal's most compact all-in-one unit: four footswitches, five modes and Axe-Fx III amp modelling. 240+ amp models with four channels, 45+ DynaCabs and 256 user cab slots, 104 presets of four blocks and four scenes.
⚡ Match a tone on this unitHow do you dial in a specific tone on a Fractal Audio AM4?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the Fractal Audio AM4 name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Free download
Printable cheat sheet: PDF and PNG
The clean, edge, classic rock, metal and lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Fractal Audio AM4
Values as the unit's screen shows them, on its own scale; each drawn knob shows that value's share of the range. They are where to begin, not Fractal Audio's numbers: pick the amp model first, then move one control at a time from here.
Clean
Double Verb amp type, the clean example in Fractal's manual. Gain 3.00, Bass 4.00, Mid 4.50, Treble 6.00, Presence 4.00. The manual prints no knob values, so every setting on this page is Tonelify's starting point on Fractal's 0 to 10 amp knobs. Choosing a type also loads a matching DynaCab and sets its controls to starting values for that amp, so start from there and move only these. A preset has four blocks, the Amp block and three more: put a Reverb block after the amp for space.
- Gain 3.00
- Bass 4.00
- Mid 4.50
- Treble 6.00
- Presence 4.00
Add a Reverb block after the amp.
Edge of breakup
AC-20, the edgy channel in the manual's four-channel example. Gain 5.00, Bass 4.00, Mid 5.00, Treble 6.00, Presence 5.00. Dig in for grit and play lighter to clean up. For more push, put a Drive block in front set to Klone Chiron, which Fractal calls a smooth, transparent overdrive, with its drive low and its level up. Turn the Drive on and off in Effects Mode.
- Gain 5.00
- Bass 4.00
- Mid 5.00
- Treble 6.00
- Presence 5.00
Klone Chiron in a Drive block in front.
Classic rock
Plexi 100W, or 1987X Treble, the type the manual's channel tutorial sets up on channel B. Gain 7.00, Bass 4.00, Mid 6.50, Treble 6.00, Presence 5.00. Keep the mids up: rock guitar sits in the midrange, and scooping it is the usual reason a preset sounds thin next to a band. Fractal's own example dimes the Plexi, so take Gain higher for a heavier sound.
- Gain 7.00
- Bass 4.00
- Mid 6.50
- Treble 6.00
- Presence 5.00
Metal
Recto 2 Red amp type. Gain 6.00, Bass 5.00, Mid 4.00, Treble 6.00, Presence 5.50. Every preset has its own Input Gate before the blocks, so raise its threshold until the hiss stops between chords. For tighter palm mutes, put a Drive block in front set to T808 OD with its drive low and its level up, and take the amp's Gain down a step. The manual's advice on noise is to set the Input Pad as low as you can without clipping, since higher pads raise the noise floor.
- Gain 6.00
- Bass 5.00
- Mid 4.00
- Treble 6.00
- Presence 5.50
Input Gate up, T808 OD in front.
Lead
USA JP IIC+, the soaring lead in the manual's example. Gain 6.50, Bass 4.50, Mid 6.00, Treble 5.50, Presence 5.00, with a Delay block after the amp and its Tempo set to a note value so it follows the tap tempo. For solos, use the Amp block's Out Boost, up to +4.0 dB per channel: tap the active channel in Amp Mode, or the Amp switch in Effects Mode, and the LED turns white while it is on.
- Gain 6.50
- Bass 4.50
- Mid 6.00
- Treble 5.50
- Presence 5.00
Out Boost for solos: tap the active channel.
Chasing one song? Name it and the matcher writes that song's settings for the Fractal Audio AM4.
Fractal AM4 effect blocks
A preset holds four blocks: the Amp block, with the cab inside it, and up to three more from this list. The Types column is how many effect types each block has, and the last column how many of that block one preset can use, as of the manual's writing.
| Block | What it does, per Fractal | Types | Per preset |
|---|---|---|---|
| AMP (Amp + Cab) | All the amp models in one block, with 45+ DynaCabs and space for 256 user cabs | 245+ | 1 |
| CHO (Chorus) | Mono and stereo modulation, including vibrato | 18 | 1 |
| CMP (Compressor) | Controls dynamics and adds sustain | 20+ | 1 |
| DLY (Delay) | Up to 8 seconds, with analog, digital, tape and more | 28 | 1 |
| DRV (Drive) | Overdrive, distortion, fuzz, boost and more | 70+ | 2 |
| ENH (Enhancer) | Width and clarity | 3 | 1 |
| FIL (Filter) | Filters plus touch-wah and auto-wah | 18 | 1 |
| FLG (Flanger) | Subtle modulation to jet effects | 32 | 1 |
| GTE (Gate / Expander) | Extra noise shaping beside the built-in preset gate | 4 | 1 |
| GEQ (Graphic EQ) | Three bands to ten | 18 | 1 |
| PEQ (Parametric EQ) | Five-band parametric EQ | 1 | 1 |
| PHR (Phaser) | Vintage and modern phasers, including Uni-Vibe style | 17 | 1 |
| REV (Reverb) | Springs, rooms, plates, halls and more | 79 | 1 |
| ROT (Rotary) | Rotary speaker with several mic positions | 1 | 1 |
| TRM (Tremolo) | Vintage and modern tremolo, plus auto-pan | 7 | 1 |
| VOL (Volume) | Volume, plus channel input and output tools | 2 | 1 |
| WAH (Wahwah) | Wah types based on classic originals | 9 | 1 |
AM4 footswitch modes
Four footswitches and five modes. In Gig Mode, the default, most switches act when you release them, because of the press-and-hold and two-switch shortcuts.
| Mode or shortcut | What the footswitches do |
|---|---|
| Preset Mode | Tap to load a preset from the current bank; hold 1 for the previous bank, hold 4 for the next |
| Scene Mode | Tap to load a scene of the current preset; hold 1 or 4 for the previous or next preset |
| Effects Mode | Tap to turn an effect on or off; the Amp switch toggles the Boost instead; hold for the block's four channels |
| Amp Mode | Tap to load amp channel A, B, C or D; tap the active channel to toggle the Out Boost |
| Tuner and Tempo | Switch 1 taps the tempo, switch 3 mutes, switch 4 exits |
| Press 1 + 2 | Mode Select |
| Press 2 + 3 | Amp Mode |
| Press 3 + 4 | Tuner and Tempo |
AM4 rig setups
The manual's setup pages, and the global settings each one needs.
| Setup | What to set |
|---|---|
| Direct to FRFR, PA, mixer or interface | Nothing: almost all factory presets are made for this, headphones included |
| Neutral power amp and guitar cab | Cab Modeling off (globally, or Cab Section BYPASSED per preset); Power Amp Modeling stays on |
| Guitar amp's FX return or a tube power amp | Cab Modeling off and Power Amp Modeling off |
| Split Mode | Output Mode SPLIT: Out 1 L with cab simulation, Out 1 R without, for a neutral power amp and cab |
| S/PDIF in or out | Input Source SPDIF for the input; the AM4 runs at a fixed 48 kHz |
| Pedals after the AM4 | The Insert jacks, fixed before the balanced outputs; not heard on USB or S/PDIF |
Fractal Audio AM4 specifications
- Released
- 2025
Fractal Audio AM4 questions
What is the Fractal AM4?
Fractal Audio's most compact all-in-one amp modeller, a floor unit with four footswitches that runs the amp modelling of the Axe-Fx III. Fractal announced it in November 2025 at $699; Guitar World gives €925 and £789. It weighs 1.63 kg and takes the included 9 V, 1.5 A supply. Fractal's site lists 240+ amp models and over 325 effect models, 104 presets and four scenes in each.
How many amps are in the AM4?
Fractal's product page says 240+ amp models, and the manual's block inventory 245+ amp types, many with sub-types. All are in one Amp block with four channels, A to D, each a complete amp and cab with its own settings. Fractal's own example sets A as a clean Double Verb, B as an edgy AC-20, C as a dimed Plexi 100W and D as a USA JP IIC+.
How many effects can the AM4 run at once?
Four blocks per preset: the Amp block, which holds the cab, and up to three effect blocks, two of which can be Drives. The CPU meter shows the load. Fractal sets a dynamic limit of about 85 % and suggests aiming for 80 % or lower; over the limit, the AM4 shows CPU LIMIT and bypasses all processing. Bypassed blocks still use CPU, so one block with different channels costs less than two blocks.
How many presets does the Fractal AM4 hold?
104, in 26 banks, A to Z, of four. Each preset has four scenes and every block four channels. Tap a switch in Preset Mode to load a preset from the bank, and hold 1 or 4 to change bank. To save, press SAVE, then ENTER twice; you can rename the preset and its scenes on the same page, up to 31 characters. Unsaved changes are lost when you change preset or turn the unit off.
What are scenes on the AM4?
Four versions of one preset. A scene stores which blocks are on and which channel each uses, so one preset can hold a clean, a crunch and a lead and switch between them in Scene Mode with one tap. Since all four blocks are already loaded, the switch is gapless. Channels add to that: a Drive block can be a different pedal on each of its four channels.
What is Amp Mode on the AM4?
Press footswitches 2 and 3 together and the four switches pick amp channels A to D, with the amp's settings on screen. Tap the active channel to toggle the Out Boost, set from 0 to +4.0 dB per channel; the LED turns white when it is on. The leftmost page picks the amp model and the channel's LED colour.
Can you load IRs into the Fractal AM4?
Yes. The Cab Section has two modes, DynaCab, with 45+ built-in cabs and a mic you move on screen, and User Cab, for your own IRs in UltraRes or standard formats. User cabs install into 256 slots with AM4-Edit or Fractal-Bot. Each mode can blend two cabs, at a CPU cost, and a stereo room simulation sits on the Cab Extras page.
How do you use the tuner on the AM4?
Press footswitches 3 and 4 together, or 1 and 2 and then 4. Footswitch 3 mutes, and the Mute Type setting can make the mute automatic. The tuner defaults to A440, and Downtune, up to 4 semitones, shows notes as if you were in standard tuning. In the tuner, footswitch 1 taps the global tempo.
Does the AM4 have a looper?
No. The manual's block inventory has no looper block, and its footswitch modes are Presets, Scenes, Effects, Tuner and Tempo, and Amp Mode. For practice, USB lets you play computer audio through the AM4's outputs alongside your guitar.
Can you use expression pedals with the AM4?
Yes, two, on the PEDAL jacks: linear pedals of 10 to 100 kΩ on TRS cables, or a switch on either jack. Set the type in SETUP > Pedals and calibrate. A pedal controls a parameter through a Modifier saved with the preset, or works globally as input, output or amp volume. Tuner on Heel Down shows the tuner when the pedal is all the way back. Fractal's EV pedals are its own choice.
How do you connect the AM4 to a guitar amp?
Into an amp's effects return or a tube power amp, turn off both Power Amp Modeling and Cab Modeling in SETUP > Global Settings, or per preset. Into a neutral power amp and a guitar cab, turn off Cab Modeling only. Split Mode sends the full amp and cab to Out 1 L for the desk and no cab to Out 1 R for a neutral power amp and cab on stage. These presets then will not suit headphones or FRFR speakers.
Can you record with the AM4 over USB?
Yes. It is a 4 by 4, 24-bit, 48 kHz audio interface: record the processed stereo output and a dry DI at once, play computer audio at its outputs, or send a DI back through it to re-amp. macOS needs no driver; Windows 11 needs Fractal's driver. The insert is not heard on USB. MIDI also runs over USB.
What inputs and outputs does the AM4 have?
An instrument input with Auto-Z impedance, two balanced 1/4 inch outputs, a headphone output, a stereo insert send and return before the balanced outputs, S/PDIF in and out at a fixed 48 kHz, two PEDAL jacks, USB and 3.5 mm MIDI in and out. A Type A 3.5 mm to 5-pin adapter connects traditional MIDI gear. There are no XLR outputs.
Does the AM4 have MIDI?
Yes, 3.5 mm MIDI In and Out, and MIDI over USB. It receives program changes, mapped 000 to 103 to presets A1 to Z4, and control changes for volume, tap tempo, the tuner, scenes, and block bypass and channels. It can send program and control changes per preset or scene, and it follows incoming MIDI clock but does not send clock.
Fractal AM4 vs FM3: which should you get?
The AM4 is $699 and built for simplicity, with Amp Mode, four blocks per preset and 104 presets. Guitar World lists the FM3 at $1,099 and points out it has more blocks per preset and XLR outputs, which suits a fully equipped live rig. Both run Fractal's Axe-Fx III modelling. Our FM3 page covers that unit.
What software works with the AM4?
AM4-Edit, Fractal's free editor and librarian for Mac and Windows, adds tools the unit lacks, such as Block Library, Channel Copy and Scene Swap. Fractal-Bot, in its Tools menu, updates firmware, installs presets and cabs and backs up the unit. Fractal's downloads page lists firmware from 2 September 2026.
How do you build a patch on the Fractal Audio AM4?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the Fractal Audio AM4?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
More Fractal Audio gear
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Fractal Audio AM4 in it. A first plan starts with 7 days free, $0 today.