Tonelify
Black Friday40% off yearly
Guitar ampModelling combo

Marshall Code 25 settings

A 25 watt, 10 inch version of the Code 50 with the same 14 preamps, 4 power amps, 8 cabs and 24 effects. GAIN, BASS, MIDDLE, TREBLE and VOLUME are stored in each preset; MASTER is not.

⚡ Match a tone on this amp
Front panel7 controls
  • Gain
  • Bass
  • Middle
  • Treble
  • Volume
  • Master
  • Preset
The controls on the Marshall Code 25, drawn in a row rather than in the real panel layout. The list comes from Marshall's own documentation.

How do you dial in a specific tone on a Marshall Code 25?

The Marshall Code 25 is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.

Marshall Code 25 Settings Cheat Sheet: knob positions for clean, blues, classic rock, metal and lead on one page

Free download

Printable cheat sheet: PDF and PNG

The clean, blues, classic rock, metal and lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.

Starting settings on the Marshall Code 25

Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Marshall's numbers: move one control at a time from here.

Clean

CL DSL, which Marshall's manual describes as the DSL100H on the Classic Gain Channel, Clean setting. Gain 3, Bass 5, Middle 5, Treble 6, Volume 6. In POWER, British Class A, Marshall's 30 watt model with EL84 valves, and in CAB the 1912, a 1x12 with a Celestion G12-B150. Add Room in REV with its Level low. Turn each of the five knobs once, even one already in place: the manual says the stored knobs only become active when they are used, and the screen then shows the current setting beside the stored one. CL JVM, the JVM410H's Clean Channel in Green Mode, is the other clean to try at the same settings.

CL DSL preampCode 25 clean
  • Gain 3
  • Bass 5
  • Middle 5
  • Treble 6
  • Volume 6

British Class A power amp, 1912 cab, Room reverb low.

Edge of breakup and blues

JTM45, which the manual describes as a JTM45 2245 on a clean setting and puts in its Clean group, so it is the model to push. Gain 5, Bass 5, Middle 6, Treble 6, Volume 6, then raise Gain until hard picking just breaks up and roll the guitar's volume back for cleaner rhythm. Pair it with Vintage Marshall 30W in POWER, the 5881 model, and the handwired 1974CX 1x12 in CAB. For more push, Bluesbreaker, the 1962 combo overdriven, is the next model up, or turn on Distortion in PRE FX in GUV mode with Drive low and Level high: the manual says stompbox Distortion is particularly effective when used with classic and vintage MST preamp models.

JTM45 preampCode 25 blues
  • Gain 5
  • Bass 5
  • Middle 6
  • Treble 6
  • Volume 6

Vintage Marshall 30W, 1974CX cab, GUV Distortion for more.

Classic rock

JCM800, Marshall's model of the JCM800 2203 overdriven on its high sensitivity input. Gain 6, Bass 5, Middle 7, Treble 6, Volume 6. Use Classic Marshall 100W in POWER, the EL34 model, and the 1960 4x12 with Celestion G12-T75s in CAB. Keep Middle up: rock rhythm guitar sits in the mids, and cutting them is the usual reason a preset sounds thin next to a band. Plexi, the 1959SLP overdriven, is the other Crunch model to try at the same settings; if either sounds dull, raise Presence in POWER, which the manual says adds higher frequency content.

JCM800 preampCode 25 classic rock
  • Gain 6
  • Bass 5
  • Middle 7
  • Treble 6
  • Volume 6

Classic Marshall 100W power amp, 1960 cab.

Metal

OD JVM, the JVM410H on its OD1 Channel in Red Mode. Gain 7, Bass 5, Middle 5, Treble 6, Volume 6. Use Classic Marshall 100W in POWER and the 1960V 4x12, with Celestion Vintage 30s, in CAB. In the AMP section, raise the Gate's Threshold, which sets the point at which the Gate begins to close, to about 3, until the hiss between chords stops. For tighter palm mutes, put Distortion in ODR mode in front with Drive low and take Gain a step down. For more weight, raise Resonance in POWER, which the manual says adds lower end thud, before you reach for Bass.

OD JVM preampCode 25 metal
  • Gain 7
  • Bass 5
  • Middle 5
  • Treble 6
  • Volume 6

Gate Threshold about 3, 1960V cab.

Lead

OD DSL, Marshall's model of the JCM2000 DSL's Lead 2 Channel. Gain 6 to 7, Bass 5, Middle 7, Treble 6, Volume 7, a step of Volume above your rhythm presets so the solo comes forward. Add Vintage in DEL, which the manual says recreates the sound of analogue delays, with its Level low, and set the time by tap tempo: press MOD and DEL together, tap the selector in time and press EXIT/STORE to go back. The DEL LED flashes in time with the delay.

OD DSL preampCode 25 lead
  • Gain 6 to 7
  • Bass 5
  • Middle 7
  • Treble 6
  • Volume 7

Vintage delay, Level low, timed by tap tempo.

Quiet practice and playing along

MASTER sets the Code 25's overall level and is not stored in a preset, so the presets above keep their balance however low you play. The headphone output, a mini-jack, is for silent practice, and Marshall's manual says it can also be used as a line out. Play along through the MP3 player input, another mini-jack, or over Bluetooth after pressing REV and POWER together to pair. The manual says audio streamed over Bluetooth bypasses the panel features, all but MASTER, so set the backing track's level on your phone and the guitar's with VOLUME.

Chasing one song? Name it and the matcher writes that song's settings for the Marshall Code 25.

Match a song to this amp7 days free, $0 today

Marshall Code 25 amp list

The AMP section has 14 MST preamps in three groups, Clean, Crunch and Overdrive, plus Natural, which Marshall made for external effects: it gives the EQ and the Gate without the colour of a modelled preamp. Each row gives Marshall's own line for the model. GAIN, BASS, MIDDLE, TREBLE and VOLUME set it, and Marshall's official presets show them from 0 to 10.

From Marshall's CODE25 owner's manual, PREAMP MODELS. MST is Marshall-Softube modelling.
PreampGroupMarshall's description
JTM45CleanJTM45 2245 on a clean setting
CL DSLCleanDSL100H on the Classic Gain Channel, Clean setting
CL AmericanCleanClassic American pure-valve sound
CL JVMCleanJVM410H on the Clean Channel in Green Mode
Acoustic SimulatorCleanSimulates the sound of an electro-acoustic guitar
BluesbreakerCrunch1962 Bluesbreaker combo overdriven
PlexiCrunch1959SLP overdriven
CR AmericanCrunchClassic American valve overdrive
JCM800CrunchJCM800 2203 overdriven (high sensitivity input)
'50s BritishCrunchClassic British valve combo overdrive
OD JVMOverdriveJVM410H on OD1 Channel in Red Mode
OD DSLOverdriveJCM2000 DSL Lead 2 Channel
OD AmericanOverdriveClassic American higher gain overdrive
OD Silver JubileeOverdriveJCM2555 Silver Jubilee Lead Channel

Marshall Code 25 power amp list

The POWER section models four valve power amps. Each has two controls, Presence for high end and Resonance for low end thud, both from 0 to 10.

From Marshall's CODE25 owner's manual, POWER AMP MODELS.
Power ampMarshall's description
Classic Marshall 100WClass A/B, 100 watts, EL34 valves
Vintage Marshall 30WClass A/B, 30 watts, 5881 valves
British Class AClass A, 30 watts, EL84 valves
American Class A/BClass A/B, 100 watts, 6L6 valves

Marshall Code 25 cabinet list

The CAB section has eight Marshall cabinets: four 4x12s, two 2x12s and two 1x12s. You choose one per preset; the manual says the cabinet models have no settings to edit.

From Marshall's CODE25 owner's manual, CABINET TYPES.
CabinetSpeakers
19604x12, Celestion G12-T75
1960V4x12, Celestion Vintage 30
1960AX4x12, Celestion G12M-25
1960HW4x12, Celestion G12H-30
19362x12, Celestion G12-T75
1936V2x12, Celestion Vintage 30
19121x12, Celestion G12-B150
1974CX1x12, G12M-20, handwired

Marshall Code 25 effects list

Marshall counts 24 effects. Counting each mode as one, the manual's tables give 24: 7 in PRE FX, 8 in MOD, 4 in DEL, 4 in REV and the Gate. Including the Gate, up to five run at once, one from each section. Delay time runs from 0 to 4000 ms and nearly every other setting from 0 to 10.

PRE FX (7)
Compressor, Distortion GUV (Marshall Guv'nor), Distortion ODR (classic overdrive pedal), Distortion DIS (classic distortion pedal), Auto Wah ENV (envelope filter), Auto Wah LFO, Pitch Shifter
MOD (8)
Chorus CLS (classic chorus), Chorus VIB (vibrato), Flanger JET, Flanger MET (metallic), Phaser CLS (classic phaser), Phaser VBE (vibe), Tremolo VLV (valve), Tremolo SQR (square wave)
DEL (4)
Studio, Vintage (analogue), Multi (four tap patterns), Reverse
REV (4)
Room, Hall, Spring, Stadium
Gate (1)
Noise Gate, in the AMP section, Threshold 0 to 10

What controls does the Marshall Code 25 have?

The Marshall Code 25 has 7 controls on its front panel: Gain, Bass, Middle, Treble, Volume, Master and Preset.

Marshall Code 25 specifications

Power
25W
Speaker
1x10" custom voiced
Front panel
Gain, Bass, Middle, Treble, Volume, Master, Preset
Released
2016

What the Marshall Code 25 panel means when you dial it in

25W through a 1x10" custom voiced. There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail.

Marshall Code 25 questions

What amps are in the Marshall Code 25?

The same 14 MST preamps as the Code 50, which Marshall developed with Softube, in three groups. Clean: JTM45, CL DSL, CL American, CL JVM and Acoustic Simulator. Crunch: Bluesbreaker, Plexi, CR American, JCM800 and '50s British. Overdrive: OD JVM, OD DSL, OD American and OD Silver Jubilee. Natural adds the EQ and the Gate without the colour of a modelled preamp, for use with external effects. Each preset pairs a preamp with one of 4 power amps and 8 cabinets, all listed below with Marshall's description of each.

What is the difference between the Marshall Code 25 and Code 50?

Size and power. Both manuals list the same 14 preamps, 4 power amps, 8 cabinets, 24 effects and 100 presets, with Bluetooth, USB and the footcontroller jack on both, and one declaration of conformity covers the two. The Code 25 is 25 watts into a 10 inch custom voiced speaker, 8 kg and 350 by 340 by 215 mm; the Code 50 is 50 watts into a 12 inch, 13 kg and 530 by 440 by 280 mm. The Code 50 also has a separate EDIT selector for deep editing, where the Code 25 edits with its PRESET selector.

How many effects does the Code 25 have?

24, and up to five at once including the Gate, one from each section. PRE FX has the Compressor, the Distortion in GUV (Marshall Guv'nor), ODR and DIS modes, Auto Wah and Pitch Shifter. MOD has Chorus, Flanger, Phaser and Tremolo, two modes each. DEL has Studio, Vintage, Multi and Reverse, from 0 to 4000 ms. REV has Room, Hall, Spring and Stadium. The Gate is in the AMP section.

Why don't the Code 25's knobs match the preset?

Because GAIN, BASS, MIDDLE, TREBLE and VOLUME are stored as part of each preset, and Marshall's manual says they only become active when they are used: until you turn one, its position is not related to the preset's setting. Once you do, the screen shows its current and stored setting, and the EXIT/STORE LED flashes red to show the preset has changed. Scroll away without storing and the preset reverts to its last stored settings. MASTER is not stored in a preset.

How do you save a preset on the Code 25?

Press and hold EXIT/STORE on any screen to quick store over the current preset. To store somewhere else, hold EXIT/STORE briefly until the preset name begins to flash, turn PRESET to the new location and hold EXIT/STORE until STORED appears; the preset in that location is overwritten. To rename, hold EXIT/STORE again while the name flashes, until the cursor flashes at its first letter: turn PRESET to change the letter and push it to move on. The section switches double as naming shortcuts, from Clear on PRE FX to Backspace on POWER.

How do you edit a preset on the Code 25?

Hold down the section switch you want to edit until its LED lights green, and the screen shows the current preamp, effect, power stage or cab. Turn PRESET to pick another, push it to begin editing, turn it to change the value and push it again for the next parameter. Speaker cabinet models are not editable. Press EXIT/STORE to leave without storing.

What presets come on the Code 25?

100, all user editable, and turning PRESET steps through them. Marshall's manual does not list them by name. A factory reset returns them to how they were when the amp was new. Through the Marshall Gateway app you can share presets with other Code users, and Marshall's Code Presets site has official presets alongside community ones.

Does the Code 25 have a footswitch?

Not in the box. Its F/C jack takes Marshall's CODE footcontroller, the PEDL-91009, a 4-way programmable unit sold separately, which recalls presets and can tap the delay time from an assigned button.

How do you use tap tempo on the Code 25?

Press MOD and DEL together and the screen shows the delay time in milliseconds. Turn the selector to set it, or tap it in time with the music, then press EXIT/STORE once to go back to the preset. The manual's tap tempo steps call it the EDIT selector, but the Code 25's front panel has one selector, PRESET. An assigned button on the optional footcontroller can tap the time as well.

How do you use the tuner on the Code 25?

Press PRE FX and AMP together and pluck a string: the note shows on the screen. Arrows to the left of the vertical line mean the note is flat and arrows to the right that it is sharp; when the arrows disappear, the string is in tune. Press EXIT/STORE to leave the tuner.

How do you connect the Code 25 to the Gateway app?

In two steps, Marshall says: pair, then connect. Press REV and POWER together, and the blue LED on EXIT/STORE flashes while the amp is in pairing mode. Pair it in your phone's Bluetooth settings, then open Marshall Gateway, for iOS and Android, and connect. Putting the amp into pairing mode clears any existing Bluetooth pairing on it, and Marshall says to mute the phone so its alerts do not play through the amp.

Can you record with the Code 25 over USB?

Yes. Connected over USB, it works as a DAW interface: select it as the input source on your computer and in your DAW to record, or as the computer's output to play music through it, with MASTER setting the level. The same port takes firmware updates and sends and receives MIDI for the front panel controls.

How do you factory reset the Code 25?

Switch it off, hold down the AMP section switch and switch it on. The screen warns that the amp is about to return to its factory settings: press and hold EXIT/STORE to confirm, or press any other switch to cancel and start as normal. A reset overwrites all of your own presets.

Is the Marshall Code 25 a valve amp?

No. It is a modelling amp: its preamps, power amps and cabinets are MST models, developed by Marshall with Softube, of valve amps and Marshall cabs. Marshall gives 25 watts RMS into a 10 inch custom voiced speaker, 8 kg, and 350 by 340 by 215 mm.

When did the Marshall Code 25 come out?

In 2016. The declaration of conformity printed in its manual covers the CODE25 and CODE50 and is dated 2 May 2016.

What are the best Marshall Code 25 settings for metal?

Start with OD JVM at Gain 7, Bass 5, Middle 5, Treble 6 and Volume 6, into Classic Marshall 100W and the 1960V cab, with the Gate's Threshold at about 3. These are starting points rather than Marshall's numbers. For tighter palm mutes, put Distortion in ODR mode in front with Drive low and take Gain a step down; for more weight, raise Resonance in POWER.

Does Tonelify support the Marshall Code 25?

Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Gain, Bass, Middle, Treble, Volume, Master, Preset. You will not be told to set a knob that is not there.

Sources

Panel, specifications and dates checked against these on .

The manual is the file Marshall's CODE25 support page links as its User Manual.

More Marshall gear

Similar amps from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for the controls the Marshall Code 25 has. A first plan starts with 7 days free, $0 today.