Way Huge Green Rhino settings
These are the MkIV controls. The Classic switch up brings back the original Green Rhino sound and makes 100Hz and 500Hz inactive. Each EQ knob cuts or boosts 12 dB.
⚡ Match a tone on this pedal- Volume
- Tone
- Drive
- 100Hz
- 500Hz
- Classic
How do you dial in a specific tone on a Way Huge Green Rhino?
A drive pedal is not an amount of gain, it is a shape. The Way Huge Green Rhino changes what reaches the amp's input, so where it sits in the chain and how the amp is set behind it matter as much as the pedal's own controls. Settings here cover both ends: the pedal, and the amp underneath it.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Free download
Printable cheat sheet: PDF and PNG
The texas gritty boost, driving the bus, big fat ol' lead, clean amp punch and in front of gain settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Way Huge Green Rhino
Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Way Huge's numbers: move one control at a time from here.
Texas Gritty Boost
Volume 12:00, Tone 2:00, Drive 12:30, Classic on, 100Hz 12:00, 500Hz 12:00. The first of Way Huge's sample settings, read from Way Huge's drawing to the nearest half hour. The Classic switch is drawn up, and the manual says up is on and makes the 100Hz and 500Hz controls inactive, so only Volume, Tone and Drive count here. Tone at 2:00 sits on the bright side of a control the manual says goes from mellow to bright.
- Volume 12:00
- Tone 2:00
- Drive 12:30
- 100Hz 12:00
- 500Hz 12:00
- Classic on
Classic up makes 100Hz and 500Hz inactive, per the manual.
Driving the Bus
Volume 1:00, Tone 12:00, Drive 2:00, 100Hz 2:00, 500Hz 12:00, Classic off. Way Huge's second sample, read from the drawing to the nearest half hour. With Classic off the two EQ knobs work. The manual says 100Hz governs the amount of thump in your stomp, with 12 dB of cut or boost, so 2:00 adds low end. The 500Hz knob stays at noon, halfway between the panel's minus and plus marks.
- Volume 1:00
- Tone 12:00
- Drive 2:00
- 100Hz 2:00
- 500Hz 12:00
- Classic off
Read from Way Huge's drawing, to the nearest half hour.
Big Fat Ol' Lead
Volume 2:00, Tone 1:30, Drive 4:00, 100Hz 12:30, 500Hz 1:00, Classic off. Way Huge's third sample, read from the drawing to the nearest half hour, with far more Drive than the other two. The manual says 500Hz adjusts the thickness of your lower mid-section, so 1:00 adds a little body to the lead, and 100Hz at 12:30 stays close to the middle.
- Volume 2:00
- Tone 1:30
- Drive 4:00
- 100Hz 12:30
- 500Hz 1:00
- Classic off
Read from Way Huge's drawing, to the nearest half hour.
Punch on a clean amp
Volume 1:00, Tone 12:00, Drive 10:00, 100Hz 12:00, 500Hz 1:00, Classic off. This one is Tonelify's, not Way Huge's. Way Huge's product page says the pedal can take a clean amp from pristine purity to a punchy, dynamic rhythm tone. Low Drive keeps the attack, and a touch of 500Hz adds body. Raise Drive until the chords start to break up, then set Volume so the pedal is a little louder than the amp alone.
- Volume 1:00
- Tone 12:00
- Drive 10:00
- 100Hz 12:00
- 500Hz 1:00
- Classic off
Tonelify's starting point, not Way Huge's.
Push a distorted channel
Volume 2:00, Tone 12:00, Drive 9:00, 100Hz 10:00, 500Hz 1:00, Classic off. Also Tonelify's, not Way Huge's. Way Huge's product page says that in front of a distorted channel you will hear more gain and sustain than you thought your amp was capable of. Here Drive stays low and Volume does the pushing. The 100Hz cut is there to keep palm mutes tight, and the 500Hz lift holds the notes forward. If it still feels loose, turn 100Hz down further.
- Volume 2:00
- Tone 12:00
- Drive 9:00
- 100Hz 10:00
- 500Hz 1:00
- Classic off
Tonelify's starting point, not Way Huge's.
Chasing one song? Name it and the matcher writes that song's settings for the Way Huge Green Rhino.
What controls does the Way Huge Green Rhino have?
The Way Huge Green Rhino has 6 controls on its front panel: Volume, Tone, Drive, 100Hz, 500Hz and Classic.
Way Huge Green Rhino specifications
- Front panel
- Volume, Tone, Drive, 100Hz, 500Hz, Classic
What the Way Huge Green Rhino panel means when you dial it in
Its controls are Volume, Tone, Drive, 100Hz, 500Hz and Classic, and settings for this pedal are written against those names rather than a generic level, tone and gain.
Way Huge Green Rhino questions
What does the Classic switch on the Green Rhino do?
It toggles the classic Green Rhino sound on and off. Way Huge's manual says up is on, and that this makes the 100Hz and 500Hz controls inactive. Way Huge's product page describes it as the simple Volume, Tone, Drive setup and sound of the original Green Rhino.
What do the 100Hz and 500Hz knobs do?
Way Huge's manual says 100Hz governs the amount of thump in your stomp, and 500Hz adjusts the thickness of your lower mid-section. Each gives plus or minus 12 dB. They only work with the Classic switch off.
What do the Volume, Tone and Drive knobs do?
In Way Huge's words, Volume regulates the roar of the rhino, Tone modifies the tone from mellow to bright, and Drive adjusts your rhino's hairiness. In plain terms: output level, brightness and amount of overdrive.
What changed on the Green Rhino MkIV?
Way Huge's product page says it has the Volume, Tone and Drive controls of the original with the MkII's 100Hz, an all-new 500Hz control and a Classic switch. It also says it is smaller and more compact than its ancestors.
What are Way Huge's sample settings for the Green Rhino?
The MkIV manual draws three: Texas Gritty Boost, Driving the Bus and Big Fat Ol' Lead. All three are on this page, read from the drawing to the nearest half hour.
Can the Green Rhino be used on a clean amp and a distorted amp?
Yes. Way Huge's product page says it can take a clean amp to a punchy, dynamic rhythm tone, and that in front of a distorted channel you will hear more gain and sustain. The last two panels on this page are Tonelify's starts for each.
What power supply does the Green Rhino MkIV use?
A single 9-volt battery, a 9-volt adapter such as the Dunlop ECB003 or ECB003EU, or the DC Brick and Iso-Brick supplies. The manual says the jack is 5.5 mm x 2.1 mm with the positive voltage on the outer sleeve, and the current draw is 18.5 mA.
Why did my Green Rhino stop working on a battery?
Way Huge's manual says the pedal will lock into bypass mode when it is time to change the battery. It also says to disconnect the input jack to save the battery when you are not playing, and that using an external supply disconnects the battery.
Is the Green Rhino MkIV true bypass?
Yes. Way Huge's manual lists the bypass as True Hardwire Relay, and a blue LED shows when the effect is on.
What are the Green Rhino MkIV's specs and price?
Input impedance over 400 k ohm, output under 100 ohm, noise floor -95 dBV, about 4.8 by 3.2 by 1.75 inches and 13 oz, per the manual. Way Huge's product page listed it at $159.99 when Tonelify read it on 3 November 2026.
Where does the Way Huge Green Rhino go in the signal chain?
In front of the amp input, before any time-based effects. Drive pedals interact with what the amp is already doing, so the amp's own gain setting is part of the answer and cannot be ignored when the pedal is dialled in.
Does Tonelify support the Way Huge Green Rhino?
Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Volume, Tone, Drive, 100Hz, 500Hz, Classic. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
The first three panels are Way Huge's sample settings from the MkIV manual, read from the drawing to the nearest half hour. Clean amp punch and In front of gain are Tonelify's starting points, built on what Way Huge's product page says the pedal does in those two places.
Similar pedals from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Way Huge Green Rhino in it. A first plan starts with 7 days free, $0 today.