Tonelify
Black Friday40% off yearly
Reviewed
Fender Mustang LT25CleanSoloProg Rock

Shine On You Crazy Diamond on a Fender Mustang LT25

Pink Floyd

Written for the Mustang LT25 as Fender's owner's manual describes it: 20 amp models and four effect slots.

Shine On You Crazy Diamond Fender Mustang LT25 settings: a starting point

On a Fender Mustang LT25, select the 70S UK CLN amp model and start at Gain 2, Treble 5, Bass 5 and Middle 7, with the neck pickup on the early solos, bridge on the third.

70S UK CLN amp modelShine On You Crazy Diamond on the LT25
  • Gain 2
  • Treble 5
  • Bass 5
  • Middle 7

Middle is set from the encoder.

Values as the display shows them, 0 to 10 with one decimal. These are Tonelify's starting points for the LT25, written from the documented rig and Fender's manual. They are not Fender's numbers and not the settings on the record.

Match Shine On You Crazy Diamond to my rigYour guitar and pedals too. 7 days free.

The record's amp model is in the list

Which Fender Mustang LT25 amp model for Shine On You Crazy Diamond?

70S UK CLN. Gilmour's rig for the album had a Hiwatt DR103 into a WEM cabinet, with a Fender Dual Showman beside it. Fender's 70S UK CLN is inspired by the original 100-watt Hiwatt DR103, which it calls the classic cleaner-tone British stack, so the record's main amp is in the list by name. How the opening solo was cut is told two ways, into the amp or straight into the mixing desk, and either way it is a clean sound, which is where this preset starts.

TWIN CLEAN, based on the 1965 Twin Reverb, is the Fender to try for the Dual Showman side of the rig. It is a different Fender amp, not a model of the Showman.

Pick the amp model with the encoder first, then set the knobs. The LT25 has knobs for Gain, Volume, Treble, Bass and Master Volume, and no Middle knob. Fender's manual says Middle is set only from the encoder: press it on the amp model, scroll to MIDDLE and turn.

Fender Mustang LT25 effects for Shine On You Crazy Diamond

STOMP
COMPRESSOROne account of the sessions has the opening solo going into the desk, driven only by its input compression, and Wikipedia hears a heavily compressed sound. Fender describes COMPRESSOR as inspired by the MXR Dyna Comp.Keep it gentle, enough to even out the notes.
MOD
PHASERStands in for the MXR Phase 90 on the four-note theme and the third solo. Fender's manual names no pedal behind PHASER.Set the rate slow.
DELAY
ECHOStands in for the Binson Echorec on the delays. Fender bases ECHO on a different unit, the Maestro Echoplex tape delay.Set the time with the TAP button.
REV
PLATEThe reverb in the starting point, which Wikipedia also hears on the opening solo.LEVEL around 4.

Each preset has four effect slots, STOMP, MOD, DELAY and REV, and each slot holds one effect. Fender's manual gives the signal path as instrument, stompbox, modulation, amplifier, delay, reverb, speaker. To fill a slot, press the encoder on it and turn to the effect.

Does it sound off on your Mustang LT25?

Pick what you hear. You get the knobs to turn on the LT25 from the settings above, and how far.

What the LT25 cannot do for Shine On You Crazy Diamond

Each solo in Parts I to V is a little hotter than the one before, and on the record the step up is a Colorsound Power Boost, which the LT25 has no model of. A preset has one STOMP slot, so the later solos need a second preset with OVERDRIVE in place of COMPRESSOR: set low for the mild crunch of the second solo, higher for the third, played on the bridge pickup. An optional footswitch moves between two presets you choose. The Leslie in the album setup has no direct counterpart either; VIBRATONE, Fender's rotating speaker effect, is the nearest thing in the MOD slot.

How to store it on the LT25

Press SAVE once it sounds right. Fender's manual says an unsaved edit reverts when you leave the preset or switch the amp off. Master Volume is not stored in a preset.

What Pink Floyd used on Shine On You Crazy Diamond

David Gilmour's Black Strat, a 1969 Fender Stratocaster with a 1963 rosewood neck and 1971 Fender pickups, with a Hiwatt DR103 into a WEM cabinet, a Fender Dual Showman and a Leslie rotating speaker in his setup for the album, recorded at Abbey Road in 1975; Gilmourish credits the overdrive on the solos to a Colorsound Power Boost, his main overdrive since early 1972, set for a very mild crunch on the second solo and cranked with an MXR Phase 90 on the bridge pickup for the third, while noting elsewhere that some of the drive could be the amp, and puts the Phase 90 on the four-note theme it calls Syd's Theme and a Binson Echorec on the delays; how the opening solo was cut is told two ways, since Gilmourish's account of the sessions says it went straight into the mixing console, driven only by the desk's input compression, while its article on the song says straight into the amp on the neck pickup, and Wikipedia describes a heavily compressed sound with reverb; Gilmour says the band had to record the backing track again after someone switched the echo returns on Abbey Road's new desk onto the tracks, and the lap steel solo belongs to Parts VI to IX at the other end of the album.

Rig sources: Gilmourish: classic tone, Shine On You Crazy Diamond, Gilmourish: Wish You Were Here 1975, Guitar World: Tonal Recall on Shine On You Crazy Diamond, Wikipedia: Shine On You Crazy Diamond

Fender Mustang LT25 facts checked against Fender's own documents on : Fender: Mustang LT25 owner's manual (PDF), Fender: Mustang LT25 quick start guide (PDF)

Pink Floyd's rig and the generic five-knob settings for the Shine On You Crazy Diamond tone →

A different guitar, or pedals in front?

This page sets the LT25 on its own. Name your guitar and your pedals in the tone matcher and Tonelify rewrites the settings for that whole rig, pickup position included. A first plan starts with 7 days free, $0 that day.

Match Shine On You Crazy Diamond to my rig

Shine On You Crazy Diamond on the LT25: questions

What Fender Mustang LT25 settings do you need for Shine On You Crazy Diamond?

Select the 70S UK CLN amp model and start at Gain 2, Treble 5, Bass 5 and Middle 7. These are Tonelify's starting points for the LT25, written from the documented rig and Fender's manual. They are not Fender's numbers and not the settings on the record.

Which Fender Mustang LT25 amp model is closest to the amp on Shine On You Crazy Diamond?

70S UK CLN. Gilmour's rig for the album had a Hiwatt DR103 into a WEM cabinet, with a Fender Dual Showman beside it. Fender's 70S UK CLN is inspired by the original 100-watt Hiwatt DR103, which it calls the classic cleaner-tone British stack, so the record's main amp is in the list by name. How the opening solo was cut is told two ways, into the amp or straight into the mixing desk, and either way it is a clean sound, which is where this preset starts. TWIN CLEAN, based on the 1965 Twin Reverb, is the Fender to try for the Dual Showman side of the rig. It is a different Fender amp, not a model of the Showman.

Which Fender Mustang LT25 effects does Shine On You Crazy Diamond use?

STOMP: COMPRESSOR. One account of the sessions has the opening solo going into the desk, driven only by its input compression, and Wikipedia hears a heavily compressed sound. Fender describes COMPRESSOR as inspired by the MXR Dyna Comp. MOD: PHASER. Stands in for the MXR Phase 90 on the four-note theme and the third solo. Fender's manual names no pedal behind PHASER. DELAY: ECHO. Stands in for the Binson Echorec on the delays. Fender bases ECHO on a different unit, the Maestro Echoplex tape delay. REV: PLATE. The reverb in the starting point, which Wikipedia also hears on the opening solo.

What can the LT25 not do for Shine On You Crazy Diamond?

Each solo in Parts I to V is a little hotter than the one before, and on the record the step up is a Colorsound Power Boost, which the LT25 has no model of. A preset has one STOMP slot, so the later solos need a second preset with OVERDRIVE in place of COMPRESSOR: set low for the mild crunch of the second solo, higher for the third, played on the bridge pickup. An optional footswitch moves between two presets you choose. The Leslie in the album setup has no direct counterpart either; VIBRATONE, Fender's rotating speaker effect, is the nearest thing in the MOD slot.

How do you set Middle for Shine On You Crazy Diamond on a Mustang LT25?

From the encoder. Press it to open the preset, press it again on the amp model, scroll to MIDDLE, press, turn to 7 and press SAVE. The LT25 has no Middle knob, and Fender's manual says this is the only way to adjust it.

Is there a Shine On You Crazy Diamond preset for the Fender Mustang LT25?

Fender's manual lists the LT25's 30 factory presets and none is named after this song. Build it by hand from the settings on this page, then press SAVE and choose SAVE AS to keep it under the song's name. SAVE AS replaces whatever is in the slot you pick, so choose one you do not need.

What if you have a different guitar or pedals in front of the LT25?

These settings assume the unit on its own. Tonelify's matcher rewrites them for the guitar, pedals and amp you name, pickup position included. A first plan starts with 7 days free, and nothing is charged that day.

More for the LT25