Fender Mustang LT25 settings
Five knobs: Gain, Volume, Treble, Bass and Master Volume. The amp model is picked with the encoder from twenty, and Middle is set there too because it has no knob of its own. Tap sets the delay time.
⚡ Match a tone on this ampHow do you dial in a specific tone on a Fender Mustang LT25?
The Fender Mustang LT25 is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.
Name the song you are chasing and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.
What controls does the Fender Mustang LT25 have?
Fender Mustang LT25 specifications
- Power
- 25W
- Speaker
- 1x8" Fender Special Design
- Voicings
- 50S TWIN, 60S UK CLN, 70S ROCK, 70S UK CLN, 80S ROCK, 90S ROCK, BASSMAN, BURN, CHAMP, DELUXE CLN, DELUXE DIRT, DOOM METAL, EXCELSIOR, ALT METAL, METAL 2000, PRINCETON, SMALLTONE, SUPER CLEAN, SUPER HEAVY, TWIN CLEAN
- Front panel
- Gain, Volume, Treble, Bass, Master Volume, Middle (in the amp menu), Tap
What the Fender Mustang LT25 panel means when you dial it in
25W through a 1x8" Fender Special Design. There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. The selectable voicings are 50S TWIN, 60S UK CLN, 70S ROCK, 70S UK CLN, 80S ROCK, 90S ROCK, BASSMAN, BURN, CHAMP, DELUXE CLN, DELUXE DIRT, DOOM METAL, EXCELSIOR, ALT METAL, METAL 2000, PRINCETON, SMALLTONE, SUPER CLEAN, SUPER HEAVY and TWIN CLEAN. Picking the voicing comes before the knob positions, because the same numbers land somewhere else on each one.
Tones to try on a Fender Mustang LT25
Fender Mustang LT25 questions
What are good starting settings on a Fender Mustang LT25?
Start from the middle of the range on Gain, Volume, Treble, Bass and move one control at a time. There is no single correct set of numbers for this amp, because the target changes with the song. Tonelify writes the values for a named tone against this amp's actual panel: Gain, Volume, Treble, Bass, Master Volume, Middle (in the amp menu), Tap.
Can the Fender Mustang LT25 get a metal tone?
Yes, by selecting a high-gain voicing rather than by turning the gain up on a clean one. On a modelling amp the model choice sets the ceiling and the knobs work inside it, so picking the voicing is the first step of the answer.
Does Tonelify support the Fender Mustang LT25?
Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Gain, Volume, Treble, Bass, Master Volume, Middle (in the amp menu), Tap. You will not be told to set a knob that is not there.