Dunlop Fuzz Face Mini settings
⚡ Match a tone on this pedal- Volume
- Fuzz
How do you dial in a specific tone on a Dunlop Fuzz Face Mini?
A drive pedal is not an amount of gain, it is a shape. The Dunlop Fuzz Face Mini changes what reaches the amp's input, so where it sits in the chain and how the amp is set behind it matter as much as the pedal's own controls. Settings here cover both ends: the pedal, and the amp underneath it.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Free download
Printable cheat sheet: PDF and PNG
The from noon, crunch, full fuzz and lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Dunlop Fuzz Face Mini
Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Dunlop's numbers: move one control at a time from here.
Dunlop's starting point
Volume 12:00, Fuzz 12:00. Dunlop's manuals for all three Fuzz Face Minis say to start with both controls at 12 o'clock, and this panel is that line. From here, Dunlop says to turn Volume clockwise for more overall effect volume and Fuzz clockwise for more fuzz. Match the level with the pedal off before you go further.
- Volume 12:00
- Fuzz 12:00
Dunlop's words: start with both controls at 12 o'clock.
Edge of breakup crunch
Volume 1:00, Fuzz 9:00. This one is Tonelify's, not Dunlop's. With Fuzz low, the pedal adds grit and push to the amp rather than a full fuzz, which suits rhythm parts on a clean or just-breaking amp. Volume sits past noon to make up for the lower Fuzz; set it by ear so the pedal is a little louder than bypass.
- Volume 1:00
- Fuzz 9:00
Tonelify's starting point, not Dunlop's.
Classic full fuzz
Volume 12:00, Fuzz 5:00. This one is Tonelify's, not Dunlop's. Fuzz all the way up is the thick, sustaining end of the pedal, for riffs and leads. With Fuzz this high, the guitar's own volume knob does a lot of the work: rolling it back cleans the sound up, so you can keep the pedal on and play quieter parts from the guitar.
- Volume 12:00
- Fuzz 5:00
Tonelify's starting point, not Dunlop's.
Lead boost
Volume 2:00, Fuzz 3:00. This one is Tonelify's, not Dunlop's. A high Fuzz with Volume above the bypass level lifts a solo over the band. This is not a setting from any player's rig. If the lead gets too loud against the rhythm sound, bring Volume back first and leave Fuzz where it is.
- Volume 2:00
- Fuzz 3:00
Tonelify's starting point, not Dunlop's.
Chasing one song? Name it and the matcher writes that song's settings for the Dunlop Fuzz Face Mini.
Fuzz Face Mini versions compared
The three Fuzz Face Minis share the same two knobs and the same power, and differ in transistors and gain. Every value here is from Dunlop's manuals and product pages.
| Spec | FFM1 Silicon | FFM2 Germanium | FFM3 Jimi Hendrix |
|---|---|---|---|
| Based on | A 1970 Fuzz Face in Dunlop's collection | '66 to '68 era pre-silicon Fuzz Faces | The full-size JHF1 circuit |
| Transistors | BC108 silicon | Germanium, slightly mismatched | Same circuit as the JHF1 |
| Max gain | 55 dB | 45 dB | 55 dB |
| Input impedance | 10 k ohm | 10 k ohm | 10 k ohm |
| Current draw | 3.4 mA | 3.4 mA | 3.4 mA |
| Price | $159.99 | $159.99 | $179.99 |
What controls does the Dunlop Fuzz Face Mini have?
The Dunlop Fuzz Face Mini has 2 controls on its front panel: Volume and Fuzz.
Dunlop Fuzz Face Mini specifications
- Front panel
- Volume, Fuzz
What the Dunlop Fuzz Face Mini panel means when you dial it in
Its controls are Volume and Fuzz, and settings for this pedal are written against those names rather than a generic level, tone and gain.
Dunlop Fuzz Face Mini questions
What is the best starting point for the Fuzz Face Mini?
Dunlop's manuals say to start with both controls at 12 o'clock. Then rotate Volume clockwise to increase overall effect volume, and Fuzz clockwise to increase the amount of fuzz.
What do the Fuzz Face Mini's knobs do?
Two knobs. Dunlop's manual says the Volume knob controls overall effect volume and the Fuzz knob controls amount of fuzz. The footswitch toggles on and bypass, and a blue LED indicates on.
What is the difference between the FFM1, FFM2 and FFM3?
The transistors and the voicing. Dunlop says the FFM1 Silicon is spec'd from a 1970 Fuzz Face in its own collection, with bright, aggressive BC108 silicon transistors. The FFM2 Germanium is based on '66 to '68 era pre-silicon Fuzz Faces, with warm vintage fuzz tones from slightly mismatched germanium transistors. The FFM3 Jimi Hendrix has the same circuit as the full-size JHF1 in a smaller housing. All three have the same two knobs.
Which Fuzz Face Mini has the most gain?
The FFM1 and FFM3 manuals list a max gain of 55 dB, and the FFM2 Germanium manual lists 45 dB. So the germanium version has less gain on paper than the silicon ones.
Where does the Fuzz Face Mini go in the pedal chain?
Tonelify's advice: first, straight after the guitar. Dunlop's manuals list an input impedance of 10 k ohm, which is low for a pedal, so the Fuzz Face responds to the guitar's volume knob and to the pickups directly. A buffer or a buffered pedal before it changes how it reacts.
Does the Fuzz Face Mini clean up with the guitar's volume?
That is how most players use a Fuzz Face, and it is Tonelify's advice rather than a line from Dunlop: set Fuzz high, then roll the guitar's volume back to clean the sound up, and turn it up again for full fuzz. It works best with the pedal first in the chain.
What power does the Fuzz Face Mini need?
9 V DC at 3.4 mA, per Dunlop's manuals. It runs on one 9-volt battery, installed through the battery door on the underside of the pedal, or a 9-volt AC adapter such as the Dunlop ECB003 or ECB003EU, or a DC Brick power supply.
Is the Fuzz Face Mini true bypass?
Yes. Dunlop's manuals list True Hardwire bypass, and the product pages say that as with the original models, Fuzz Face Minis feature true bypass switching.
How is the Fuzz Face Mini different from the full-size Fuzz Face?
Dunlop's pages say the Mini line puts Fuzz Face tones in smaller, more pedalboard-friendly housings with several modern appointments: a bright status LED, an AC power jack and a convenient battery door.
What does the Fuzz Face Mini cost?
Dunlop's product pages listed the FFM1 Silicon and FFM2 Germanium at $159.99 and the FFM3 Jimi Hendrix at $179.99 when Tonelify read them on 7 November 2026.
Where does the Dunlop Fuzz Face Mini go in the signal chain?
In front of the amp input, before any time-based effects. Drive pedals interact with what the amp is already doing, so the amp's own gain setting is part of the answer and cannot be ignored when the pedal is dialled in.
Does Tonelify support the Dunlop Fuzz Face Mini?
Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Volume, Fuzz. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
- Dunlop: FFM1 Silicon Fuzz Face Mini manual (PDF)
- Dunlop: FFM2 Germanium Fuzz Face Mini manual (PDF)
- Dunlop: FFM3 Jimi Hendrix Fuzz Face Mini manual (PDF)
- Dunlop: Silicon Fuzz Face Mini product page
- Dunlop: Germanium Fuzz Face Mini product page
- Dunlop: Jimi Hendrix Fuzz Face Mini product page
The noon start, the controls, power and specs are from Dunlop's manuals; the version descriptions and prices are from Dunlop's product pages. The crunch, full fuzz and lead panels and the chain advice are Tonelify's, not Dunlop's.
More Dunlop gear
Similar pedals from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Dunlop Fuzz Face Mini in it. A first plan starts with 7 days free, $0 today.