Electro-Harmonix Holy Grail settings
⚡ Match a tone on this pedal- Reverb
- Mode
How do you dial in a specific tone on an Electro-Harmonix Holy Grail?
Time and modulation effects sit at a specific point in a chain and change character completely if they move. Settings for the Electro-Harmonix Holy Grail come with the position in the signal path, not just the knob values, because a delay in front of a driven amp and the same delay in a loop are two different sounds.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Free download
Printable cheat sheet: PDF and PNG
The subtle spring, wet surf spring, hall ambience, big hall and flerb settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Electro-Harmonix Holy Grail
Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Electro-Harmonix's numbers: move one control at a time from here.
Subtle spring
Mode Spring, Reverb 10:00. This setting is Tonelify's, because the EHX manual draws no settings. EHX says Spring is a recreation of the classic spring reverbs found in many guitar amplifiers, and that from the knob's minimum up to 12 o'clock you will hear a subtle amount of reverb. So 10:00 sits low in that range. Stay below noon if you want it barely there.
- Reverb 10:00
- Mode Spring
Tonelify's starting point, not EHX's.
Wet surf spring
Mode Spring, Reverb 3:00. Tonelify's start, not EHX's. EHX's page has a sound clip it calls Wet Surfy Spring, and the manual says the amount of reverb increases dramatically from 12 o'clock to the maximum, so this is the upper half of the knob. The Reverb knob acts like a wet/dry control, so as you turn it up you also hear less of your dry guitar. Back it off if the notes lose their attack.
- Reverb 3:00
- Mode Spring
Tonelify's starting point, not EHX's.
Hall ambience
Mode Hall, Reverb 11:00. Tonelify's start, not EHX's. EHX calls Hall a new, lush reverb. At 11:00 the knob is still in the subtle part of its travel, which suits chords and rhythm parts where you want some space but the guitar has to stay in front.
- Reverb 11:00
- Mode Hall
Tonelify's starting point, not EHX's.
Big hall
Mode Hall, Reverb 2:00. Tonelify's start, not EHX's. EHX's page sums up the size with the line, how did they fit Notre Dame into such a small package. Past noon the reverb grows quickly, so move the knob in small steps around here. At 2:00 the reverb is a large part of the sound, which is better for slow lines and swells than for fast playing.
- Reverb 2:00
- Mode Hall
Tonelify's starting point, not EHX's.
Flerb
Mode Flerb, Reverb 12:30. Tonelify's start, not EHX's. EHX's page says Flerb combines flanging with spatial reverb for a unique ethereal sound, and the manual calls it a beautiful reverb like nothing you have heard before. Reverb 12:30 sits just past the point where the knob starts to rise, so the effect is plain to hear without covering the guitar. From here, turn it up for more of the ethereal wash.
- Reverb 12:30
- Mode Flerb
Tonelify's starting point, not EHX's.
Chasing one song? Name it and the matcher writes that song's settings for the Electro-Harmonix Holy Grail.
What controls does the Electro-Harmonix Holy Grail have?
The Electro-Harmonix Holy Grail has 2 controls on its front panel: Reverb and Mode.
Electro-Harmonix Holy Grail specifications
- Front panel
- Reverb, Mode
- Released
- 2009
What the Electro-Harmonix Holy Grail panel means when you dial it in
Its controls are Reverb and Mode, and settings for this pedal are written against those names rather than a generic level, tone and gain.
Electro-Harmonix Holy Grail questions
Why does the Holy Grail's Reverb knob jump after noon?
It is built that way. EHX's manual says you hear a subtle amount of reverb from minimum to 12 o'clock, and that from 12 o'clock to maximum the amount increases dramatically. EHX says this lets musicians hone in on just the right amount of subtle reverb.
What does the Reverb knob on the Holy Grail control?
EHX's manual says it acts like a wet/dry control. As you turn it clockwise you hear more reverb and less of your dry instrument. There is no separate decay or tone knob on this pedal.
What is the Flerb setting on the Holy Grail?
A flanged reverb. EHX's page says Flerb combines flanging with spatial reverb for a unique ethereal sound.
What modes does the Holy Grail have?
Three, picked with the slide switch: Spring, Hall and Flerb. EHX's manual says all three algorithms were designed and tailored for the electric guitar.
What power supply does the Holy Grail need?
Only the one it comes with. EHX's manual says to use only the 96DC-200mA adapter supplied, and warns that other DC adapters, even those made by Electro-Harmonix, could cause harm. EHX's page writes the same adapter as 9.6VDC-200mA and lists the current draw as 105 mA.
Can the Holy Grail run on a battery?
No. EHX's manual says the Holy Grail does not use batteries.
Is the Holy Grail analog or digital, and is it true bypass?
Digital, and true bypass. EHX's manual calls it digital reverb in a compact guitar pedal, and EHX's page lists Circuit Digital, Bypass True Bypass and Audio Mono.
Is the Holy Grail the same as the Holy Grail Nano?
EHX's Holy Grail address now redirects to the Holy Grail Nano page, which gives 2009 as the year released. The specs here come from that page, and the manual Tonelify read is the one EHX links for the Nano.
How big is the Holy Grail, and what does it cost?
EHX's page lists 4.5 by 2.75 by 2.1 inches. It listed the Holy Grail Nano at $137.90 when Tonelify read it on 3 November 2026.
Where does the Electro-Harmonix Holy Grail go in the signal chain?
After the drive stage. Running a time or modulation effect into a distorted input smears the repeats into the distortion instead of layering them over it, which is why this kind of pedal usually belongs in an effects loop where the amp has one.
Does Tonelify support the Electro-Harmonix Holy Grail?
Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Reverb, Mode. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
The EHX manual draws no settings, so every Reverb position on this page is Tonelify's starting point. What the knob and the three modes do is EHX's, from the manual and the product page.
More Electro-Harmonix gear
Similar pedals from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Electro-Harmonix Holy Grail in it. A first plan starts with 7 days free, $0 today.