Tonelify
Black Friday40% off yearly
PedalChorus

Electro-Harmonix Small Clone settings

⚡ Match a tone on this pedal
Front panel2 controls
  • Rate
  • Depth
The controls on the Electro-Harmonix Small Clone, drawn in a row rather than in the real panel layout.

How do you dial in a specific tone on an Electro-Harmonix Small Clone?

Time and modulation effects sit at a specific point in a chain and change character completely if they move. Settings for the Electro-Harmonix Small Clone come with the position in the signal path, not just the knob values, because a delay in front of a driven amp and the same delay in a loop are two different sounds.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Starting settings on the Electro-Harmonix Small Clone

Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Electro-Harmonix's numbers: move one control at a time from here.

Starting point: light shimmer

Depth switch shallow, Rate 3. Electro-Harmonix says the Depth switch controls the amount of frequency change in the altered signal, and the Rate knob how fast that frequency rises and falls. EHX does not say which way the switch is the deeper one, so flip it and keep the setting where the pitch moves less. These values are Tonelify's starting point, not EHX's: from here, turn Rate one step at a time.

EHX Small CloneSmall Clone starting point
  • Depth switch shallow
  • Rate 3

Tonelify's starting point, not EHX's.

Watery grunge clean

Depth switch deep, Rate 3 to 4, into a clean amp. This is the wide, seasick chorus on clean arpeggios that EHX's product page links to the pedal when it calls the Small Clone the classic analog chorus popularized by Kurt Cobain. EHX gives no settings for it: these values are Tonelify's. Keep Rate low, because with the deep setting a fast Rate quickly turns from chorus into vibrato.

EHX Small CloneSmall Clone grunge clean
  • Depth switch deep
  • Rate 3 to 4

Clean amp. Tonelify's values.

Slow pad for clean chords

Depth switch shallow, Rate 1 to 2, for slow, wide chords and ringing open strings. EHX's operating instructions say the Small Clone bends the frequency slightly and mixes the altered signal with some direct signal, which gives a doubling effect; at a slow Rate that doubling sounds like a second guitar drifting against the first. Tonelify's values, not EHX's.

EHX Small CloneSmall Clone slow pad
  • Depth switch shallow
  • Rate 1 to 2

Slow and subtle. Tonelify's values.

Rotary warble

Depth switch deep, Rate 8 to 10, for a fast, throbbing warble like a spinning speaker. One of the sound clips on EHX's product page is called Rotary Chorus, but EHX does not give its settings, so these values are Tonelify's. Use it in short bursts: switch it on for a chord or a fill and off again.

EHX Small CloneSmall Clone rotary
  • Depth switch deep
  • Rate 8 to 10

Fast and deep. Tonelify's values.

Chasing one song? Name it and the matcher writes that song's settings for the Electro-Harmonix Small Clone.

Match a song to this pedal7 days free, $0 today

What controls does the Electro-Harmonix Small Clone have?

The Electro-Harmonix Small Clone has 2 controls on its front panel: Rate and Depth switch.

Electro-Harmonix Small Clone specifications

Front panel
Rate, Depth switch
Released
2000

What the Electro-Harmonix Small Clone panel means when you dial it in

Its controls are Rate and Depth switch, and settings for this pedal are written against those names rather than a generic level, tone and gain.

Electro-Harmonix Small Clone questions

What does the Depth switch on the Small Clone do?

Electro-Harmonix says it controls the amount of frequency change that occurs in the altered signal: one setting moves the pitch less, the other more. EHX's pages do not say which way is the deeper one, so flip it and listen.

What does the Rate knob on the Small Clone do?

It sets the speed. EHX's operating instructions say the Rate knob controls the rate of alteration between raising and lowering the frequency, so clockwise makes the chorus sweep faster.

How does the Small Clone make its chorus?

EHX's operating instructions say it bends the frequency slightly from the input and mixes this altered signal with some direct, unaffected signal, and that the combination produces a doubling effect. EHX's product page lists the circuit as analog.

Did Kurt Cobain use the Small Clone?

EHX's product page calls the Small Clone a reissue of the classic analog chorus pedal popularized by Kurt Cobain. EHX does not publish the settings he used, so the grunge clean settings on this page are Tonelify's starting point.

Is the EHX Small Clone true bypass?

Yes. EHX's specifications list true bypass, an analog circuit and mono audio, with one input and one output jack.

Is the Small Clone stereo?

No. EHX's specifications list the audio as mono, with a single output jack.

What power supply does the Small Clone need?

A 9 V battery, which EHX includes, or a 9 VDC adapter with a center negative plug for a 2.1 mm center pin that can deliver at least 25 mA. EHX recommends its 9.6DC-200 adapter, says the external supply should not exceed 10 VDC, and gives the current draw as about 12 mA at 9 VDC. The battery can stay in when you use an adapter.

Why does my Small Clone battery run down?

Because a cable is in the input. EHX's operating instructions say that as long as a plug is inserted into the INPUT, a drain is placed on the battery, and recommend disconnecting the INPUT jack when the pedal is not in use.

When did the EHX Small Clone come out?

EHX's specifications give the year released as 2000 for the current pedal, which EHX's product page describes as a reissue of the classic analog chorus.

How big is the Small Clone?

EHX lists it as 5.25 by 3.38 by 2.75 inches.

Where should the Small Clone go in my pedal chain?

EHX's pages do not say. Tonelify's pick: after your overdrive or distortion and before delay and reverb, the usual place for a chorus, so the drive is not fed a wobbling signal and the repeats carry the chorus.

Where does the Electro-Harmonix Small Clone go in the signal chain?

After the drive stage. Running a time or modulation effect into a distorted input smears the repeats into the distortion instead of layering them over it, which is why this kind of pedal usually belongs in an effects loop where the amp has one.

Does Tonelify support the Electro-Harmonix Small Clone?

Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Rate, Depth switch. You will not be told to set a knob that is not there.

Sources

Panel, specifications and dates checked against these on .

More Electro-Harmonix gear

Similar pedals from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Electro-Harmonix Small Clone in it. A first plan starts with 7 days free, $0 today.