Tonelify
Black Friday40% off yearly
PedalChorus

Boss CE-2W Chorus settings

⚡ Match a tone on this pedal
Front panel3 controls
  • Rate
  • Depth
  • Mode
The controls on the Boss CE-2W Chorus, drawn in a row rather than in the real panel layout.

How do you dial in a specific tone on a Boss CE-2W Chorus?

Time and modulation effects sit at a specific point in a chain and change character completely if they move. Settings for the Boss CE-2W Chorus come with the position in the signal path, not just the knob values, because a delay in front of a driven amp and the same delay in a loop are two different sounds.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Boss CE-2W Chorus Settings Cheat Sheet: knob positions for classic ce-2, subtle lead, stereo ce-1, heavy and vibrato on one page

Free download

Printable cheat sheet: PDF and PNG

The classic ce-2, subtle lead, stereo ce-1, heavy and vibrato settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.

Starting settings on the Boss CE-2W Chorus

Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Boss's numbers: move one control at a time from here.

Classic CE-2 shimmer

Mode Standard, Rate 9:00, Depth 11:30. In BOSS's article on the CE-2W in the studio, Fletcher Stewart sets his CE-2 with the Rate set to a crawl at 9 o'clock and the Depth just shy of noon. BOSS's manual says Standard mode is the sound of the CE-2, a chorus notable for its clarity that will not impair the crispness of your guitar sound, so this is the same sound on the CE-2W. He kept it always on, for subtle movement on arpeggios.

From BOSS's articleCE-2W classic CE-2
  • Rate 9:00
  • Depth 11:30
  • Mode Standard

Rate and Depth from BOSS's article; Standard mode is the CE-2 sound.

Subtle chorus for leads

Mode Standard, Rate 12:00, Depth 10:00. BOSS's article on five ways to use a chorus pedal says that for a subtle chorus on lead parts, set the rate control at around 12 o'clock and the depth control at 10 o'clock, so it thickens the tone without overpowering the basic sound. The article is about chorus pedals in general; Standard mode is Tonelify's pick for it, because BOSS's manual calls the CE-2 sound the mild one.

From BOSS's articleCE-2W subtle lead
  • Rate 12:00
  • Depth 10:00
  • Mode Standard

Rate and Depth from BOSS's article; the mode is Tonelify's pick.

Stereo CE-1 wall of sound

Mode CE-1 chorus, Rate 10:00, Depth 2:00, with Output A and Output B going to two amps. In the same BOSS studio article, Fletcher Stewart sends the CE-2W into two amps, sets the dials to 10 and 2 o'clock and picks the CE-1 setting, which he prefers for stereo for its deeper pitch modulation and slightly darker character. He does not say which knob is which; Rate is the left knob on the pedal, so this panel reads his numbers left to right. BOSS's manual says that in stereo, Output A carries only the chorus sound and Output B only the direct sound.

From BOSS's articleCE-2W stereo CE-1
  • Rate 10:00
  • Depth 2:00
  • Mode CE-1 chorus

The article's 10 and 2 o'clock, read left to right. Two amps, both outputs.

Heavy chorus

Mode Standard, Rate 1:00, Depth 2:00. This one is Tonelify's, not BOSS's. BOSS's chorus article names Nirvana's Come As You Are as an example of a chorus with a relatively high depth and rate setting, but gives no numbers, and this is not Kurt Cobain's setting. Raising both knobs past noon gives the thick, watery sound; if notes start to sound out of tune, bring Depth back first.

Tonelify's startCE-2W heavy chorus
  • Rate 1:00
  • Depth 2:00
  • Mode Standard

Tonelify's starting point, not BOSS's.

CE-1 vibrato

Mode CE-1 vibrato, Rate 11:00, Depth 1:00. This one is Tonelify's, not BOSS's. BOSS's manual describes the CE-1 Vibrato mode as a unique chorus with strongly varying modulation. Keep Rate under noon for a slow, seasick wobble and raise it for a faster shake. Back off Depth if it sounds out of tune on chords.

Tonelify's startCE-2W vibrato
  • Rate 11:00
  • Depth 1:00
  • Mode CE-1 vibrato

Tonelify's starting point, not BOSS's.

Chasing one song? Name it and the matcher writes that song's settings for the Boss CE-2W Chorus.

Match a song to this pedal7 days free, $0 today

CE-2W modes compared

The mode switch picks one of three sounds. The descriptions are BOSS's, from the CE-2W manual and product page.

From BOSS's CE-2W Owner's Manual and product page, read on 7 November 2026.
ModeBased onBOSS's description
StandardCE-2, 1979Chorus notable for its clarity; now in stereo too
CE-1 ChorusCE-1, 1976Deeper modulation, distinctively mild
CE-1 VibratoCE-1, 1976Unique chorus with strongly varying modulation

What controls does the Boss CE-2W Chorus have?

The Boss CE-2W Chorus has 3 controls on its front panel: Rate, Depth and Mode.

Boss CE-2W Chorus specifications

Front panel
Rate, Depth, Mode
Released
2016

What the Boss CE-2W Chorus panel means when you dial it in

Its controls are Rate, Depth and Mode, and settings for this pedal are written against those names rather than a generic level, tone and gain.

Boss CE-2W Chorus questions

What are good starting settings for the Boss CE-2W?

Standard mode, Rate 9:00 and Depth just under noon. That is the setting Fletcher Stewart gives in BOSS's article on the CE-2W in the studio, and Standard mode is the CE-2 sound. For a lead, BOSS's chorus article suggests Rate around 12 o'clock and Depth at 10 o'clock.

What do the CE-2W's three modes do?

BOSS's manual says Standard is the sound of the CE-2, a chorus notable for its clarity. CE-1 Chorus is the chorus sound of the CE-1, with deeper modulation but distinctively mild. CE-1 Vibrato is a unique chorus with strongly varying modulation.

What is the difference between the CE-2W and the original CE-2?

BOSS's product page says the CE-2W's Standard mode faithfully recreates the classic CE-2 chorus sound and adds stereo output, which the mono CE-2 never had. It also adds the two CE-1 modes, with variable chorus depth that the original CE-1 did not have.

How do I use the CE-2W in stereo?

Use both outputs. BOSS's manual says that in mono, Output A mixes the direct and chorus sounds. With Output B also connected, Output A carries only the chorus sound and Output B only the direct sound, which gives a spacious chorus effect across two amps.

How much chorus should I use on a clean guitar?

BOSS's chorus article says that on clean guitar tones, keep the rate and depth controls at no more than 12 o'clock. The effect stays clear, and the detuning does not take over.

Where does the CE-2W go in the pedal chain?

After drive pedals and before delay and reverb. BOSS's chorus article says chorus pedals work best placed to receive the drive signal, and that delays and reverbs sound best after them.

What power does the CE-2W need?

A 9 V battery or a BOSS PSA series AC adaptor, per BOSS's manual, with a current draw of 25 mA. BOSS gives an expected battery life of about 32 hours for an alkaline battery and 18 hours for a carbon battery. The input jack doubles as the power switch.

Where is the CE-2W made?

In Japan. BOSS's product page says the CE-2W is made exclusively in Japan, just as the original CE-1 and CE-2 were.

When did the CE-1 and CE-2 come out?

BOSS's product page says the CE-1 Chorus Ensemble came out in 1976, the world's first chorus effect pedal and the first BOSS pedal, and the CE-2 followed in 1979. The CE-2W came out in 2016 for BOSS's 40th anniversary.

Is the CE-2W analog?

Yes. BOSS's product page lists premium all-analog circuitry with a bucket-brigade (BBD) delay line, and the manual calls it a Waza Craft series unit with analog circuitry.

What are the CE-2W's specs?

Input impedance 1 M ohm, output impedance 1 k ohm, 73 x 129 x 59 mm and 450 g including the battery, per BOSS's manual.

Where does the Boss CE-2W Chorus go in the signal chain?

After the drive stage. Running a time or modulation effect into a distorted input smears the repeats into the distortion instead of layering them over it, which is why this kind of pedal usually belongs in an effects loop where the amp has one.

Does Tonelify support the Boss CE-2W Chorus?

Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Rate, Depth, Mode. You will not be told to set a knob that is not there.

Sources

Panel, specifications and dates checked against these on .

The modes, outputs, power and specs are from BOSS's manual; history and features are from BOSS's product page; the classic, subtle lead and stereo settings and the chain advice are from BOSS's articles. The heavy chorus and vibrato panels are Tonelify's, not BOSS's.

More Boss gear

Similar pedals from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Boss CE-2W Chorus in it. A first plan starts with 7 days free, $0 today.