Strymon BigSky settings
Type picks one of twelve reverb machines. Param 1 and Param 2 can be assigned to any parameter of the machine in use, so what they do depends on the preset.
⚡ Match a tone on this pedal- Type
- Value
- Decay
- Pre-Delay
- Mix
- Tone
- Mod
- Param 1
- Param 2
How do you dial in a specific tone on a Strymon BigSky?
Time and modulation effects sit at a specific point in a chain and change character completely if they move. Settings for the Strymon BigSky come with the position in the signal path, not just the knob values, because a delay in front of a driven amp and the same delay in a loop are two different sounds.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Free download
Printable cheat sheet: PDF and PNG
The hall, spring, surf, plate, ambient and shimmer settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Strymon BigSky
Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Strymon's numbers: move one control at a time from here.
Balanced hall
Type Hall, Size Concert, Decay about 3.5 s, Tone 12:00, Mod 12:00, Mix 10:00, Pre-Delay 9:00. The hall is Strymon's: its manual suggests Concert with a decay of about 3.5 seconds, the Tone at noon and the Lo End parameter centered for a balanced hall that suits just about any style, and says Mod at 12:00 maximizes the random delay-length modulation for more warmth. Mix and Pre-Delay are Tonelify's: Strymon says adding some Pre-Delay separates the reverb from the dry signal, and Mix 10:00 keeps the guitar in front.
- Type Hall
- Decay about 3.5 s
- Tone 12:00
- Mod 12:00
- Mix 10:00
- Pre-Delay 9:00
Decay is read on the display, in seconds.
Combo amp spring
Type Spring, 2 springs, Dwell Combo, Decay about 4.5 s, Tone 10:00, Mix 11:00. Strymon's manual gives this one for traditional combo amp tones: the 2-spring option, the Combo Dwell setting and decays around 4.5 seconds, with the Tone rolled back because many combo amps have a darker spring, and the Low End parameter lower. The Tone and Mix positions are Tonelify's reading of that. Strymon also says hot input signals drive the spring harder, so turn the Dwell down if the spring distorts.
- Type Spring
- Decay about 4.5 s
- Tone 10:00
- Mix 11:00
Dwell Combo, Low End below halfway.
Surf splash
Type Spring, Tone max, Mix 3:00, Decay about 4.5 s. This is Strymon's maximum splash: its manual says to crank the Tone knob to maximum, turn the Low End parameter to minimum and turn the Mix up to 3:00 if you are bold. Strymon also notes that 3:00 on the Mix is a 50/50 balance of dry and wet. The decay is Tonelify's, carried over from the combo spring. Pick near the bridge on a clean amp for the drip.
- Type Spring
- Tone max
- Mix 3:00
- Decay about 4.5 s
Mix at 3:00 is half dry, half wet.
Subtle plate
Type Plate, Size Large, Decay about 1.5 s, Tone 12:00, Mix 9:00. Strymon's manual suggests short decays around 1.5 seconds with lower Mix values to add subtle ambience, and describes the Large plate as lush, smooth and transparent, with the Tone at noon giving a warm top end. The Mix position is Tonelify's: low enough that you feel the plate more than hear it, which suits rhythm parts that should stay tight.
- Type Plate
- Decay about 1.5 s
- Tone 12:00
- Mix 9:00
Ambient room
Type Room, Pre-Delay 12:00, Decay 12 s or more, Mod 1:00, Mix to taste. All of this is Strymon's: its manual says that for great atmospheric reverbs you should try Pre-Delay at noon, Decay at 12 seconds or more and Mod at 1:00, with the Mix to taste. For a realistic small room instead, Strymon keeps Pre-Delay at minimum with decays from 500 ms to 2 seconds.
- Type Room
- Pre-Delay 12:00
- Decay 12 s or more
- Mod 1:00
- Mix to taste
Shimmer
Type Shimmer, Shift 1 +Octave, Shift 2 +Octave & 5th, a low Amount, Decay about 6 s, Mix 11:00, Tone 12:00, Mod 12:00. Strymon's manual suggests +1 octave and octave plus fifth with lower Amount levels for just a hint of shimmer, and says more Mod widens the shimmer. The decay, Mix, Tone and Mod positions are Tonelify's. Play slow, open chords: the shifted voices grow from the reverb itself, so fast lines turn to wash.
- Type Shimmer
- Decay about 6 s
- Mix 11:00
- Tone 12:00
- Mod 12:00
Shifts and Amount are in the parameter menu.
Swells and volume-knob solos
Use the Swell machine. Strymon's manual gives three starting points: for a volume-knob effect on solos, the Swell Dry mode with a Rise Time of 0.3 seconds or less; for long ambient chords, Swell Dry with a Rise Time over 1 second, decays longer than 10 seconds and high Mod; and for a reverb that sits behind the dry signal, Swell Wet with a short Rise Time around 0.10 seconds. Rise Time and Mode are in the parameter menu, so assign them to Param 1 and Param 2 for quick access.
Where BigSky goes in the chain
Into a guitar amp, put BigSky after your drive pedals or in the amp's effects loop, and keep the Cab Filter switch on the back Off; Strymon says to use Off when outputting to a guitar amp. Into a PA, an audio interface or headphones with no amp, place BigSky last in the chain and set the Cab Filter On, which Strymon says makes dirt pedals sound amp-like. For mono, use the Left input and the Left output.
Chasing one song? Name it and the matcher writes that song's settings for the Strymon BigSky.
What controls does the Strymon BigSky have?
The Strymon BigSky has 9 controls on its front panel: Type, Value, Decay, Pre-Delay, Mix, Tone, Mod, Param 1 and Param 2.
Strymon BigSky specifications
- Front panel
- Type, Value, Decay, Pre-Delay, Mix, Tone, Mod, Param 1, Param 2
What the Strymon BigSky panel means when you dial it in
Its controls are Type, Value, Decay, Pre-Delay, Mix, Tone, Mod, Param 1 and Param 2, and settings for this pedal are written against those names rather than a generic level, tone and gain.
Strymon BigSky questions
How many reverb types does the Strymon BigSky have?
Twelve reverb machines, per Strymon: Room, Hall, Plate, Spring, Swell, Bloom, Cloud, Chorale, Shimmer, Magneto, Nonlinear and Reflections. The Type knob picks the machine, and each one saves its own settings in a preset.
What does the Mix knob do on the BigSky?
Strymon's manual says it sets the balance of the analog dry signal and the wet signal, from 100% dry at minimum to 100% wet at maximum, with a 50/50 mix at 3:00. The dry path stays analog and is never converted to digital, per Strymon's product page.
What do Param 1 and Param 2 do on the BigSky?
They are assignable to any parameter of the current reverb machine. Strymon's manual says to navigate to the parameter in the menu, then press and hold the Value encoder while turning Param 1 or Param 2. The knob then controls that parameter, for example Diffusion on the Cloud machine.
How do I save a preset on the BigSky?
Hold the Type encoder. Strymon's manual says to push the Type encoder again to save to the current location, or turn the Value encoder to pick a bank and then push the Type encoder or the A, B or C footswitch to save there. Pushing the Value encoder cancels the save.
How do banks and presets work on the BigSky?
Strymon's manual says the BigSky has 100 banks, numbered 00 to 99, each with A, B and C presets. Press A and B together to go down a bank and B and C together to go up. The footswitch lights are green when active, amber when the preset has been edited and off when bypassed.
How do I use Infinite Sustain and Freeze on the BigSky?
Press and hold a footswitch. Strymon's manual says the Hold parameter sets what the hold does for each preset: Infinite Sustain lets the reverb continue forever with each new note adding to it, and Freeze holds the reverb while new notes play on top without adding to it.
How do I get reverb trails on the BigSky?
Turn the Persist parameter on in the preset. Strymon's manual says the reverb then keeps decaying after you bypass the effect, and that with Persist on the bypass mode is set to analog bypass automatically. For trails between presets, the Spillover global lets the reverb of one preset spill into the next, once the first has been active for at least 5 seconds.
Is the BigSky true bypass?
You choose. Strymon's manual says the Bypass global switches between True Bypass, where relays take the BigSky completely out of the signal, and Buffered Bypass, where the bypassed signal runs through an analog buffer. Strymon's product page gives the buffer a 1 Meg input impedance and a 100 ohm output impedance.
What does the Cab Filter switch do on the BigSky?
Strymon's manual says it engages a speaker response curve for when no guitar amp is used: into a full-range PA, a recording interface or headphones, place the BigSky last in the chain and set the Cab Filter On. Into a guitar amp, set it Off.
What power supply does the BigSky need?
9V DC, center negative, with at least 300mA of current available, per Strymon. Strymon's manual says never to plug it into a voltage higher than 9V DC.
Can I use an expression pedal with the BigSky?
Yes, a standard TRS expression pedal in the EXP jack. Strymon's manual says the EP SET parameter in each preset chooses which knobs it controls: set the knobs for the heel position while HEEL is displayed, then for the toe while TOE is displayed. All knobs can be controlled at once. The EXP jack also takes a Strymon MiniSwitch or MultiSwitch.
How do I reset the BigSky to factory presets?
Power it up while holding the A and C footswitches, and keep holding for 5 seconds after it has powered up. Strymon's manual says REINIT is displayed and all factory patches are restored, and warns that this erases any custom patches saved in the pedal.
Can I use the BigSky in an amp's parallel effects loop?
Yes. Strymon's manual says the Dry Signal global can be set to Kill, which mutes the dry signal so the Mix knob works as an effect level. That is what a parallel loop needs, since the amp already carries the dry signal.
What is the decay time shown on the BigSky display?
Strymon's manual says the displayed Decay time is the RT60 value, the time it takes the reverb to fall to -60dB of its starting level. The range depends on the machine: 500 ms to over 20 s on Hall, Plate and Shimmer, 800 ms to 10 s on Spring, and up to over 50 s on Cloud.
Is there a printable Strymon BigSky settings cheat sheet?
Yes. The cheat sheet on this page puts all six starting settings on one page, from hall to shimmer, each with its machine, and short tips under them. Download the PDF to print it on white, or save the PNG to your phone.
Where does the Strymon BigSky go in the signal chain?
After the drive stage. Running a time or modulation effect into a distorted input smears the repeats into the distortion instead of layering them over it, which is why this kind of pedal usually belongs in an effects loop where the amp has one.
Does Tonelify support the Strymon BigSky?
Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Type, Value, Decay, Pre-Delay, Mix, Tone, Mod, Param 1, Param 2. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
More Strymon gear
Similar pedals from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Strymon BigSky in it. A first plan starts with 7 days free, $0 today.