Line 6 HX Stomp presets and settings
Compact Helix processor: three footswitches and up to eight blocks in a preset, so the chain has to be planned rather than stacked.
⚡ Match a tone on this unitHow do you dial in a specific tone on a Line 6 HX Stomp?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the Line 6 HX Stomp name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Free download
Printable cheat sheet: PDF and PNG
The clean, blues, classic rock, metal and lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Line 6 HX Stomp
Values as the unit's screen shows them, on its own scale; each drawn knob shows that value's share of the range. They are where to begin, not Line 6's numbers: pick the amp model first, then move one control at a time from here.
Clean
US Double Nrm, which Line 6 bases on the normal channel of a Fender Twin Reverb. Drive 3.0, Bass 4.5, Mid 5.0, Treble 6.0, Presence 4.0. In an Amp+Cab block the matching cab loads with the amp, and Line 6 notes that the pair takes up only one of the eight processing blocks. Keep Drive low for the clean and set the loudness with the Output block's Level, which Line 6 says sets the overall level of the entire preset. Master adjusts the amp's output level and its power amp distortion, and in Line 6's words, the lower the Master is set, the less effect the other controls will have. 2x12 Double C12N, captured from a 2x12 Fender Twin with C12N speakers, is a cab to pair with it, and Archetype Clean, based on the clean channel of a Paul Reed Smith Archon, is another clean to try.
- Drive 3.0
- Bass 4.5
- Mid 5.0
- Treble 6.0
- Presence 4.0
Edge of breakup and blues
Fullerton Brt, which Line 6 bases on the bright channel of a Fender 5C3 Tweed Deluxe. Drive 4.0, Bass 4.5, Mid 6.0, Treble 5.5, Sag 6.5, right where the amp starts to break up. Line 6's manual says higher Sag values give more touch dynamics and sustain for blues and classic rock riffs. For more push, put Teemah!, based on the Paul Cochrane Timmy Overdrive, or Minotaur, based on the Klon Centaur, before the amp with its gain low. The Input block's In-Z, on its second page, sets how HX Stomp loads your pickups: Line 6 says a lower value typically gives some high frequency loss, lower gain and a softer feel, and a higher value the full frequency response, higher gain and a tighter feel. 1x12 Fullerton, captured from a 1x12 Fender 5C3 Tweed Deluxe, is the cab to pair with it.
- Drive 4.0
- Bass 4.5
- Mid 6.0
- Treble 5.5
- Sag 6.5
Sag up for touch dynamics, Teemah! in front for more push.
Classic rock
Brit 2204, which Line 6 bases on the 50 W Marshall JCM-800 2204. Drive 5.5, Bass 4.5, Mid 6.5, Treble 6.0, Presence 5.0. Mid sits highest because rhythm parts live in the mids: cut them and the guitar sinks under the drums. Line 6 says Bias X sets how the power tubes react when pushed hard, low for a tighter feel and high for more tube compression, and that it reacts strongly with Drive and Master. For more gain, put Scream 808, Line 6's model of the Ibanez TS808 Tube Screamer, in front with its gain low. Brit Plexi Jump, based on a Marshall Super Lead 100 with its channels jumped, is the older Marshall to try, and 4x12 1960A T75, captured from a Marshall 1960A with G12T-75 speakers, suits both.
- Drive 5.5
- Bass 4.5
- Mid 6.5
- Treble 6.0
- Presence 5.0
Scream 808 in front, its gain low, for more drive.
Metal
Cali Rectifire, which Line 6 bases on the MESA/Boogie Dual Rectifier. Drive 5.0, Bass 4.5, Mid 5.5, Treble 6.0, Sag 3.0. Line 6's manual says lower Sag values give a tighter response for faster metal playing, and Bias X set low a tighter feel. Turn the Input block's Gate on with Knob 1, since its Threshold and Decay stay greyed out until then, and raise Threshold only until the hiss between chords stops; Decay sets how abruptly the gate closes once the signal drops below it. Scream 808 in front with its gain low tightens palm mutes. PV Panama, based on the Peavey 5150, is the other high-gain amp to try, and 4x12 Cali V30, captured from a MESA/Boogie 4FB with V30 speakers, is a cab to start from.
- Drive 5.0
- Bass 4.5
- Mid 5.5
- Treble 6.0
- Sag 3.0
Sag down, and the Input block's gate on.
Lead
Placater Dirty, which Line 6 bases on the BE/HBE channel of a Friedman BE-100. Drive 6.0, Bass 4.5, Mid 6.5, Treble 5.5, Presence 5.0. Put a delay after the amp and turn its Trails On: Line 6 says the repeats then keep decaying naturally when the block is bypassed or a different snapshot is selected. Transistor Tape, based on the Maestro Echoplex EP-3, and Adriatic Delay, based on a BOSS DM-2 with the Adrian Mod, are two delays to start from. Give the solo a snapshot of its own: for a song whose volume is hard to keep even, Line 6's tip is to set an effect's Gain or Level parameter per snapshot, so the solo snapshot can lift the level as it turns the delay on. 4x12 Brit V30, captured from a Marshall 1960AV with V30 speakers, is the cab to pair with it.
- Drive 6.0
- Bass 4.5
- Mid 6.5
- Treble 5.5
- Presence 5.0
Delay after the amp with Trails On, and a snapshot for the solo.
Eight blocks and two amps
Since firmware 3.0, an HX Stomp preset holds up to eight processing blocks, DSP permitting, on top of its Input and Output blocks and the Split and Mixer that a second path adds; earlier firmware allowed six. Line 6's rules allow up to two Amp+Cab, Amp or Preamp blocks in any mix, two Single Cab blocks or one Dual, one Looper and one polyphonic block, such as Poly Pitch or Feedbacker, and a model greyed out in the list will not fit. Amps, IRs, reverbs and the polyphonic pitch models use the most DSP, and a stereo effect roughly twice its mono version. To run two amps side by side, select a block, press ACTION and turn Knob 1 (Path) to B: the signal splits into two stereo paths, A and B, which merge again before the output. To save DSP, Line 6 suggests a single Amp block into a Cab > Dual block instead, since mixing two cabs already gives a lot of variation. Whenever a mono block sits in a path, both channels are combined and leave it in mono, so the order of mono and stereo blocks decides how wide the sound is.
Snapshots
Each HX Stomp preset has three snapshots. A snapshot recalls the on or off state of every block except the 1 Switch Looper, the values of up to 64 parameters, the Command Center messages and, if Tempo Select is set to Per Snapshot, the tempo; it cannot swap one amp or effect for another unless both blocks are already in the preset. Press PAGE until Snapshot footswitch mode shows, then step on 1, 2 or 3. To change a knob per snapshot, press and turn it: the value turns white. For a block you want to switch by hand, such as a boost, press ACTION, press PAGE once and set Knob 3 (Snapshot Bypass) to Off. Line 6's example is Snapshot 1 for the intro, 2 for the verse and 3 for the chorus, with Trails On in delays and reverbs so they ring on across a change. Press VIEW and ACTION together twice to save: the preset stores all three snapshots, and selecting it recalls the one that was active when it was saved.
Chasing one song? Name it and the matcher writes that song's settings for the Line 6 HX Stomp.
Line 6 HX Stomp amp list
An HX Stomp preset can hold up to two amp blocks, in any mix of Amp+Cab, Amp and Preamp. Amp+Cab loads the matching cab with the amp and still takes only one of the eight processing blocks, Amp is the same without the cab, and Preamp models only the preamp stage, which Line 6 recommends when HX Stomp feeds an amp's power section and which uses less DSP. Line 6's table, below, is the same as Helix's: 111 guitar and bass models, 15 of them Line 6 Originals, its own designs, plus Studio Tube Pre, a mic preamp under Preamp > Mic.
| Model | Type | What Line 6 says it is based on |
|---|---|---|
| WhoWatt 100 | Guitar | Hiwatt DR-103 Brill |
| Soup Pro | Guitar | Supro S6616 |
| Stone Age 185 | Guitar | Gibson EH-185 |
| Voltage Queen | Guitar | Victoria Vintage Queen |
| Tweed Blues Nrm | Guitar | Fender Bassman (normal channel) |
| Tweed Blues Brt | Guitar | Fender Bassman (bright channel) |
| Fullerton Nrm | Guitar | Fender 5C3 Tweed Deluxe (normal channel) |
| Fullerton Brt | Guitar | Fender 5C3 Tweed Deluxe (bright channel) |
| Fullerton Jump | Guitar | Fender 5C3 Tweed Deluxe (jumped channels) |
| GrammaticoLG Nrm | Guitar | Grammatico LaGrange (normal channel) |
| GrammaticoLG Brt | Guitar | Grammatico LaGrange (bright channel) |
| GrammaticoLG Jmp | Guitar | Grammatico LaGrange (jumped channels) |
| US Small Tweed | Guitar | Fender Champ |
| US Princess | Guitar | Fender Princeton Reverb |
| US Super Nrm | Guitar | Fender Super Reverb (normal channel) |
| US Super Vib | Guitar | Fender Super Reverb (vibrato channel) |
| US Deluxe Nrm | Guitar | Fender Deluxe Reverb (normal channel) |
| US Deluxe Vib | Guitar | Fender Deluxe Reverb (vibrato channel) |
| US Double Nrm | Guitar | Fender Twin Reverb (normal channel) |
| US Double Vib | Guitar | Fender Twin Reverb (vibrato channel) |
| Mail Order Twin | Guitar | Silvertone 1484 |
| Divided Duo | Guitar | ÷13 JRT 9/15 |
| Interstate Zed | Guitar | Dr Z Route 66 |
| Derailed Ingrid | Guitar | Trainwreck Circuits Express |
| Grammatico GSG | Guitar | Grammatico GSG100 |
| Jazz Rivet 120 | Guitar | Roland JC-120 Jazz Chorus |
| Essex A15 | Guitar | Vox AC-15 |
| Essex A30 | Guitar | Vox AC-30 with top boost |
| A30 Fawn Nrm | Guitar | Vox AC-30 Fawn (normal channel) |
| A30 Fawn Brt | Guitar | Vox AC-30 Fawn (bright channel) |
| Matchstick Ch1 | Guitar | Matchless DC30 (channel 1) |
| Matchstick Ch2 | Guitar | Matchless DC30 (channel 2) |
| Matchstick Jump | Guitar | Matchless DC30 (jumped) |
| Mandarin 80 | Guitar | Orange OR80 |
| Mandarin Rocker | Guitar | Orange Rockerverb 100 MkIII (dirty channel) |
| MOO)))N T Nrm | Guitar | Sunn Model T (normal channel) |
| MOO)))N T Brt | Guitar | Sunn Model T (brite channel) |
| MOO)))N T Jump | Guitar | Sunn Model T (jumped channels) |
| Brit J45 Nrm | Guitar | Marshall JTM-45 (normal channel) |
| Brit J45 Brt | Guitar | Marshall JTM-45 (bright channel) |
| Brit Trem Nrm | Guitar | Marshall JTM-50 (normal channel) |
| Brit Trem Brt | Guitar | Marshall JTM-50 (bright channel) |
| Brit Trem Jump | Guitar | Marshall JTM-50 (jumped) |
| Brit Plexi Nrm | Guitar | Marshall Super Lead 100 (normal channel) |
| Brit Plexi Brt | Guitar | Marshall Super Lead 100 (bright channel) |
| Brit Plexi Jump | Guitar | Marshall Super Lead 100 (jumped) |
| Brit P75 Nrm | Guitar | Park 75 (normal channel) |
| Brit P75 Brt | Guitar | Park 75 (bright channel) |
| Brit 2203 | Guitar | Marshall JCM-800, 100W, 2203 |
| Brit 2204 | Guitar | Marshall JCM-800, 50W, 2204 |
| Placater Clean | Guitar | Friedman BE-100 (clean channel) |
| Placater Dirty | Guitar | Friedman BE-100 (BE/HBE channel) |
| Cartographer | Guitar | Ben Adrian Cartographer |
| German Xtra Blue | Guitar | Bogner Ecstasy 101B, EL34 (blue channel) |
| German Xtra Red | Guitar | Bogner Ecstasy 101B, EL34 (red channel) |
| German Mahadeva | Guitar | Bogner Shiva |
| German Ubersonic | Guitar | Bogner Überschall |
| Cali Texas Ch1 | Guitar | MESA/Boogie Lone Star (clean channel) |
| Cali Texas Ch2 | Guitar | MESA/Boogie Lone Star (drive channel) |
| Cali IV Rhythm 1 | Guitar | MESA/Boogie Mark IV (channel I) |
| Cali IV Rhythm 2 | Guitar | MESA/Boogie Mark IV (channel II) |
| Cali IV Lead | Guitar | MESA/Boogie Mark IV (lead channel) |
| Cali Rectifire | Guitar | MESA/Boogie Dual Rectifier |
| Archetype Clean | Guitar | Paul Reed Smith Archon (clean channel) |
| Archetype Lead | Guitar | Paul Reed Smith Archon (lead channel) |
| ANGL Meteor | Guitar | ENGL Fireball 100 |
| Solo Lead Clean | Guitar | Soldano SLO-100 (clean channel) |
| Solo Lead Crunch | Guitar | Soldano SLO-100 (crunch channel) |
| Solo Lead OD | Guitar | Soldano SLO-100 (overdrive channel) |
| EV Panama Blue | Guitar | EVH 5150III 100, 6L6 (blue channel) |
| EV Panama Red | Guitar | EVH 5150III 100, 6L6 (red channel) |
| PV Panama | Guitar | Peavey 5150 |
| PV Vitriol Clean | Guitar | Peavey Invective (clean channel) |
| PV Vitriol Crunch | Guitar | Peavey Invective (crunch channel) |
| PV Vitriol Lead | Guitar | Peavey Invective (lead channel) |
| Revv Gen Purple | Guitar | Revv Generator 120 (purple/gain ch. 3) |
| Revv Gen Red | Guitar | Revv Generator 120 (red/high gain ch. 4) |
| Das Benzin Mega | Guitar | Diezel VH4 (mega channel) |
| Das Benzin Lead | Guitar | Diezel VH4 (lead channel) |
| Line 6 Clarity | Guitar | Line 6 Original |
| Line 6 Aristocrat | Guitar | Line 6 Original |
| Line 6 Carillon | Guitar | Line 6 Original |
| Line 6 Voltage | Guitar | Line 6 Original |
| Line 6 Kinetic | Guitar | Line 6 Original |
| Line 6 Oblivion | Guitar | Line 6 Original |
| Line 6 Ventoux | Guitar | Line 6 Original |
| Line 6 Elmsley | Guitar | Line 6 Original |
| Line 6 Elektrik | Guitar | Line 6 Original |
| Line 6 Doom | Guitar | Line 6 Original |
| Line 6 Epic | Guitar | Line 6 Original |
| Line 6 2204 Mod | Guitar | Line 6 Original |
| Line 6 Fatality | Guitar | Line 6 Original |
| Line 6 Litigator | Guitar | Line 6 Original |
| Line 6 Badonk | Guitar | Line 6 Original |
| Ampeg B-15NF | Bass | Ampeg B-15NF Portaflex |
| Ampeg SVT Nrm | Bass | Ampeg SVT (normal channel) |
| Ampeg SVT Brt | Bass | Ampeg SVT (bright channel) |
| Ampeg SVT-4 PRO | Bass | Ampeg SVT-4 PRO |
| US Dripman Nrm | Bass | Fender Bassman (Silverface) |
| Woody Blue | Bass | Acoustic 360 |
| Agua Sledge | Bass | Aguilar Tone Hammer |
| Agua 51 | Bass | Aguilar DB51 |
| Mandarin Bass 200 | Bass | Orange AD200 MkIII |
| Cali Bass | Bass | MESA/Boogie M9 Carbine |
| Cali 400 Ch1 | Bass | MESA/Boogie Bass 400+ (channel 1) |
| Cali 400 Ch2 | Bass | MESA/Boogie Bass 400+ (channel 2) |
| G Cougar 800 | Bass | Gallien-Krueger GK 800RB |
| Del Sol 300 | Bass | Sunn Coliseum 300 |
| Busy One Ch1 | Bass | Pearce BC-1 preamp (channel 1) |
| Busy One Ch2 | Bass | Pearce BC-1 preamp (channel 2) |
| Busy One Jump | Bass | Pearce BC-1 preamp (jumped) |
| Studio Tube Pre | Mic preamp | Requisite Y7 mic preamp |
Line 6 HX Stomp cab list
Cab blocks come as Single, which is mono, or Dual, which is stereo, holds two cabs and takes twice the DSP, and a preset takes up to two Single Cab blocks or one Dual, the cab of an Amp+Cab included. These are the 46 IR-based cabs that came with firmware 3.50. Each takes one of 12 guitar or 12 bass mic models, 1 to 12 inches from the speaker, placed from the centre to the edge of the cone, on axis or 45 degrees off it. The 41 cabs from before 3.50 are still there as Legacy Cabs, with 16 mic models of their own, and Line 6 says the new cabs use significantly less DSP than the legacy ones.
| Cab | What Line 6 says it is captured from |
|---|---|
| Soup Pro Ellipse | 1x6×9" Supro, S6616 |
| 1x8 Small Tweed | 1x8" Fender Champ |
| 1x10 US Princess | 1x10" Fender Princeton Reverb |
| 1x12 Fullerton | 1x12" Fender 5C3 Tweed Deluxe |
| 1x12 Grammatico | 1x12" Grammatico LaGrange |
| 1x12 US Deluxe | 1x12" Fender Deluxe, Oxford |
| 1x12 Open Cast | 1x12" Custom open-back, EVM12L |
| 1x12 Open Cream | 1x12" Custom open-back, G12M-65 |
| 1x12 Cali EXT | 1x12" MESA/Boogie Extension, EVM12L |
| 1x12 Cali IV | 1x12" MESA/Boogie MkIV Combo |
| 1x12 Blue Bell | 1x12" Vox AC-15, Blue Alnico |
| 2x12 Blue Bell | 2x12" Vox AC-30 Fawn, Blue Alnico |
| 2x12 Silver Bell | 2x12" Vox AC-30TB, Silver Alnico |
| 2x12 Match H30 | 2x12" Matchless DC30, Custom G12H-30 |
| 2x12 Match G25 | 2x12" Matchless DC30, Custom G12M-35 |
| 2x12 Double C12N | 2x12" Fender Twin, C12N |
| 2x12 Interstate | 2x12" Dr. Z Z Best, V30 |
| 2x12 Jazz Rivet | 2x12" Roland JC-120 |
| 2x12 Mail C12Q | 2x12" Silvertone 1484, Jensen C12Q |
| 2x12 Mandarin30 | 2x12" Orange, V30 |
| 4x10 Tweed P10R | 4x10" Fender Bassman, P10R |
| 4x10 US Super | 4x10" Fender Super Reverb, CTS alnico |
| 4x12 WhoWatt | 4x12" Hiwatt AP Fane |
| 4x12 Greenback20 | 4x12" Marshall Basketweave G12M-20 |
| 4x12 Greenback25 | 4x12" Marshall Basketweave G12M-25 |
| 4x12 Greenback30 | 4x12" Marshall Basketweave G12H-30 |
| 4x12 1960A T75 | 4x12" Marshall 1960A, G12T-75 |
| 4x12 Blackback30 | 4x12" Park 75, G12H-30 |
| 4x12 Brit V30 | 4x12" Marshall 1960AV, V30 |
| 4x12 Cali V30 | 4x12" MESA/Boogie 4FB, V30 |
| 4x12 Mandarin EM | 4x12" Orange, Eminence |
| 4x12 MOO)))N T75 | 4x12" Sunn, G12T-75 |
| 4x12 Cartog Guv | 4x12" Modified Lee Jackson, Eminence Governor |
| 4x12 Cartog C90 | 4x12" Modified Lee Jackson, Mesa C90 |
| 4x12 Uber T75 | 4x12" Bogner Uberkab, G12T-75 |
| 4x12 Uber V30 | 4x12" Bogner Uberkab, V30 |
| 4x12 XXL V30 | 4x12" ENGL XXL, V30 |
| 4x12 SoloLead EM | 4x12" Soldano, Eminence 12-5875 |
| 1x12 Epicenter | 1x12" Epifani Ultralight |
| 1x15 Ampeg B-15 | 1x15" Ampeg B-15 |
| 2x15 Brute | 2x15" MESA/Boogie, EV |
| 2x15 US Dripman | 2x15" Fender Bassman, JBL D130 |
| 4x10 Garden | 4x10" Eden D410XLT |
| 4x10 Ampeg Pro | 4x10" Ampeg PR-410HLF |
| 6x10 Cali Power | 6x10" MESA/Boogie PowerHouse |
| 8x10 SVT AV | 8x10" Ampeg SVT-810AV |
Line 6 HX Stomp effects list
HX Stomp has all the effects of Helix, Line 6 says, and the same list, with selected effects from Line 6's older DL4, DM4, MM4 and FM4 stompboxes and M13, M9 and M5 processors in the Legacy subcategory: they are listed apart under each category. Many models come in mono and stereo versions, and the stereo one uses roughly twice the DSP. Where Line 6 names what a model is based on, it is in brackets; the rest are Line 6 Originals. The polyphonic models, Feedbacker, Poly Detune, Poly Sustain, Poly Pitch, Poly Wham, Poly Capo and 12 String, fit one per preset. The Looper's four models come last; HX Stomp has no 6 Switch Looper.
- Distortion (44)
- Kinky Boost (Xotic EP Booster), Deranged Master (Dallas Rangemaster Treble Booster), Minotaur (Klon Centaur), Teemah! (Paul Cochrane Timmy Overdrive), Heir Apparent (Analogman Prince of Tone), Tone Sovereign (Analogman King of Tone), Alpaca Rogue (Way Huge Red Llama, modded), Compulsive Drive (Fulltone OCD), Dhyana Drive (Hermida Zendrive), Horizon Drive (Horizon Precision Drive), Valve Driver (Chandler Tube Driver), Top Secret OD (DOD OD-250), Prize Drive (Nobels ODR-1(bc)), Scream 808 (Ibanez TS808 Tube Screamer), Pillars (Earthquaker Devices Plumes), Hedgehog D9 (MAXON SD9 Sonic Distortion), Stupor OD (BOSS SD-1 Overdrive), Deez One Vintage (BOSS DS-1 Distortion, Made-in-Japan), Deez One Mod (BOSS DS-1 Distortion, Keeley modded), Ratatoullie Dist (Pro Co RAT, with LM308 opamp), Vermin Dist (Pro Co RAT), Vital Dist (the octave/distortion circuit of the Earthquaker Devices Life), Vital Boost (the boost circuit of the Earthquaker Devices Life), KWB (Benadrian Kowloon Walled Bunny Distortion), Legendary Drive (Carvin VLD1 Legacy Drive, hi gain channel), Swedish Chainsaw (BOSS HM-2 Heavy Metal Distortion, MIJ), Arbitrator Fuzz (Arbiter Fuzz Face), Pocket Fuzz (Jordan Boss Tone Fuzz), Bighorn Fuzz ('73 Electro-Harmonix Ram's Head Big Muff Pi), Triangle Fuzz (Electro-Harmonix Big Muff Pi), Dark Dove Fuzz (Electro-Harmonix Russian Big Muff Pi), Ballistic Fuzz (Euthymia ICBM Fuzz), Industrial Fuzz (Z.Vex Fuzz Factory), Tycoctavia Fuzz (Tycobrahe Octavia), Wringer Fuzz (Garbage's modded BOSS FZ-2), Thrifter Fuzz, Xenomorph Fuzz (Subdecay Harmonic Antagonizer), Megaphone (a megaphone), Bitcrusher, Ampeg Scrambler (Ampeg Scrambler Bass Overdrive), ZeroAmp Bass DI (Tech 21 SansAmp Bass Driver DI V1), Regal Bass DI (Noble Preamp Bass DI), Obsidian 7000 (Darkglass Electronics Microtubes B7K Ultra), Clawthorn Drive (Wounded Paw Battering Ram)
- Distortion, legacy (17)
- Tube Drive (Chandler Tube Driver), Screamer (Ibanez Tube Screamer), Overdrive (DOD Overdrive/Preamp 250), Classic Dist (Pro Co RAT), Heavy Dist (BOSS Metal Zone), Colordrive (Colorsound Overdriver), Buzz Saw (Maestro Fuzz Tone), Facial Fuzz (Arbiter Fuzz Face), Jumbo Fuzz (Vox Tone Bender), Fuzz Pi (Electro-Harmonix Big Muff Pi), Jet Fuzz (Roland Jet Phaser), L6 Drive (Colorsound Overdriver, modded), L6 Distortion, Sub Oct Fuzz (PAiA Roctave Divider), Octave Fuzz (Tycobrahe Octavia), Bronze Master (Maestro Bass Brassmaster), Killer Z (BOSS Metal Zone MT-2)
- Dynamics (12)
- Deluxe Comp, Red Squeeze (MXR Dyna Comp), Kinky Comp (Xotic SP Compressor), Ampeg Opto Comp (Ampeg Opto Comp Compressor), Rochester Comp (Ashly CLX-52, in conjunction w/ B. Sheehan), LA Studio Comp (Teletronix LA-2A), 3-Band Comp, Noise Gate, Hard Gate, Horizon Gate (the gate circuit of the Horizon Precision Drive), Autoswell, Feedbacker
- Dynamics, legacy (7)
- Tube Comp (Teletronix LA-2A), Red Comp (MXR Dyna Comp), Blue Comp (BOSS CS-1), Blue Comp Treb (BOSS CS-1, Treble switch on), Vetta Comp, Vetta Juice, Boost Comp (MXR Micro Amp)
- EQ (8)
- Simple EQ, Low and High Cut, Low/High Shelf, Parametric, Tilt, 10 Band Graphic (MXR 10-Band Graphic EQ), Cali Q Graphic (MESA/Boogie Mark IV Graphic EQ), Acoustic Sim
- Modulation (30)
- Optical Trem (Fender optical tremolo circuit), 60s Bias Trem (Vox AC-15 Tremolo), Tremolo/Autopan (BOSS PN-2), Harmonic Tremolo, Bleat Chop Trem (Lightfoot Labs Goatkeeper), Script Mod Phase (MXR Phase 90), Pebble Phaser (Electro-Harmonix Small Stone), Ubiquitous Vibe (Shin-ei Uni-Vibe), FlexoVibe, Deluxe Phaser, Gray Flanger (MXR 117 Flanger), Harmonic Flanger (A/DA Flanger), Courtesan Flange (Electro-Harmonix Deluxe EM), Dynamix Flanger, Chorus, 70s Chorus (BOSS CE-1), PlastiChorus (Modded Arion SCH-Z chorus), Ampeg Liquifier Chorus (Ampeg Liquifier Chorus), Trinity Chorus (Dytronics Tri-Stereo Chorus), 4-Voice Chorus, Bubble Vibrato (BOSS VB-2 Vibrato), Vibe Rotary (Fender Vibratone), 122 Rotary (Leslie 122), 145 Rotary (Leslie 145), Triple Rotary (Yamaha RA-200), Retro Reel, Double Take, Poly Detune, AM Ring Mod, Pitch Ring Mod
- Modulation, legacy (26)
- Pattern Tremolo, Panner, Bias Tremolo (1960 Vox AC-15 Tremolo), Opto Tremolo (1964 Fender Deluxe Reverb), Script Phase (MXR Phase 90, script logo version), Panned Phaser (Ibanez Flying Pan), Barberpole, Dual Phaser (Mu-Tron Bi-Phase), U-Vibe (Shin-ei Uni-Vibe), Phaser (MXR Phase 90), Pitch Vibrato (BOSS VB-2), Dimension (Roland Dimension D), Analog Chorus (BOSS CE-1), Tri Chorus (Dytronics Tri-Stereo Chorus), Analog Flanger (MXR Flanger), Jet Flanger (A/DA Flanger), AC Flanger (MXR Flanger), 80A Flanger (A/DA Flanger), Frequency Shift, Ring Modulator, Rotary Drum (Fender Vibratone), Rotary Drum/Horn (Leslie 145), Tape Eater, Warble-Matic, Random S&H, Sweeper
- Delay (28)
- Simple Delay, Mod/Chorus Echo, Dual Delay, Multitap 4, Multitap 6, Ping Pong, Sweep Echo, Ducked Delay (TC Electronic 2290), Reverse Delay, Vintage Digital, Vintage Swell, Pitch Echo, Transistor Tape (Maestro Echoplex EP-3), Cosmos Echo (Roland RE-201 Space Echo), Harmony Delay, Bucket Brigade (BOSS DM-2), Adriatic Delay (BOSS DM-2 w/ Adrian Mod), Adriatic Swell, Elephant Man (Electro-Harmonix Deluxe Memory Man), Multi Pass, Heliosphere, Poly Sustain, Glitch Delay, Euclidean Delay, ADT, Crisscross, Tesselator, Ratchet
- Delay, legacy (17)
- Ping Pong (TC Electronic 2290), Dynamic (TC Electronic 2290), Stereo, Digital, Dig w/Mod, Reverse, Lo Res, Tube Echo (Maestro Echoplex EP-1), Tape Echo (Maestro Echoplex EP-3), Sweep Echo, Echo Platter (Binson EchoRec), Analog Echo (BOSS DM-2), Analog w/Mod (Electro-Harmonix Deluxe Memory Man), Auto-Volume Echo, Multi-Head (Roland RE-101 Space Echo), Bubble Echo, Phaze Eko
- Reverb (13)
- Dynamic Hall, Dynamic Plate, Dynamic Room, Dynamic Ambience, Dynamic Bloom, Shimmer, Hot Springs, Nonlinear, Glitz, Ganymede, Searchlights, Plateaux, Double Tank
- Reverb, legacy (12)
- Plate, Room, Chamber, Hall, Echo, Tile, Cave, Ducking, Octo, '63 Spring, Spring, Particle Verb
- Pitch/Synth (12)
- Pitch Wham (Digitech Whammy), Twin Harmony (Eventide H3000), Simple Pitch, Dual Pitch, Boctaver (Boss OC-2 Octaver), 3 OSC Synth, Poly Pitch, Poly Wham, Poly Capo, 12 String, 3 Note Generator, 4 OSC Generator
- Pitch/Synth, legacy (17)
- Bass Octaver (EBS OctaBass), Smart Harmony (Eventide H3000), Octi Synth, Synth O Matic, Attack Synth (Korg X911 Guitar Synth), Synth String (Roland GR700 Guitar Synth), Growler, Buzz Wave, Rez Synth, Seismik Synth, Analog Synth, Synth Lead, String Theory, Synth FX, Saturn 5 Ring Mod, Synth Harmony, Double Bass
- Filter (4)
- Mutant Filter (Musitronics Mu-Tron III), Mystery Filter (Korg A3), Autofilter, Asheville Pattrn (Moog Moogerfooger MF-105M MuRF Filter)
- Filter, legacy (11)
- Voice Box, V Tron (Musitronics Mu-Tron III), Q Filter, Seeker (Z Vex Seek Wah), Obi Wah (Oberheim voltage-controlled S&H filter), Tron Up (Musitronics Mu-Tron III, up position), Tron Down (Musitronics Mu-Tron III, down position), Throbber (Electrix Filter Factory), Slow Filter, Spin Cycle (Craig Anderton's Wah/Anti-Wah), Comet Trails
- Wah (11)
- UK Wah 846 (Vox V846), Teardrop 310 (Dunlop Cry Baby Fasel model 310), Fassel (Dunlop Cry Baby Super), Weeper (Arbiter Cry Baby), Chrome (Vox V847), Chrome Custom (Modded Vox V847), Throaty (RMC Real McCoy 1), Vetta Wah, Colorful (Colorsound Wah-fuzz), Conductor (Maestro Boomerang), Teardrop Bass Q (Modified Dunlop 105Q)
- Volume/Pan (5)
- Volume Pedal, Gain, Pan, Stereo Width, Stereo Imager
- Looper (4)
- 1 Switch Looper (Mono), Shuffling Looper (Mono), 1 Switch Looper (Stereo), Shuffling Looper (Stereo)
Line 6 HX Stomp specifications
- Released
- 2018
Line 6 HX Stomp questions
What amps are in the Line 6 HX Stomp?
The same 111 guitar and bass models as Helix: the Amp and Preamp table in Line 6's HX Stomp manual for firmware 3.80 matches Helix's row for row, 94 for guitar and 17 for bass, plus Studio Tube Pre, a mic preamp. 15 are Line 6 Originals, its own designs; the others are based on real amps, from the Fender Twin Reverb and the Marshall JCM-800 to the MESA/Boogie Dual Rectifier and the Friedman BE-100, and the full list with what each is based on is below. Two can run in one preset, each as Amp+Cab, which loads its matching cab, as Amp on its own, or as Preamp, which models only the preamp stage and uses less DSP.
How many blocks can the HX Stomp run at once?
Up to eight processing blocks per preset, DSP permitting, since firmware 3.0; earlier firmware allowed six, the number Line 6's launch release gave and its HX Stomp page still gives. The Input and Output blocks, and the Split and Mixer of a second path, come on top of the eight. Within them, Line 6 allows up to two amp blocks, two Single Cab blocks or one Dual, one Looper and one polyphonic block such as Poly Pitch or Poly Sustain, which can take up to half of the preset's DSP. A model greyed out in the list will not fit, and amps, IRs and reverbs use the most.
What is the difference between the HX Stomp and the HX Stomp XL?
Mostly the footswitches. Line 6 gives the XL eight capacitive-touch footswitches and the same SHARC DSP chip found in Helix, running up to eight processing blocks at once, which HX Stomp has matched since firmware 3.0. HX Stomp has three switches and changes footswitch mode with its PAGE buttons; on the XL, Mode toggles between Stomp and Preset modes, and holding it for a second opens Pedal Edit mode, which edits effects with your feet. Both have a 2.4 inch colour LCD and a 24-bit/96kHz USB audio interface, and the XL's expression jack takes footswitches 7 and 8 where HX Stomp's takes 4 and 5.
How do you save a preset on the HX Stomp?
Press VIEW and ACTION together, the two buttons marked SAVE, to open the Save Preset screen; press them twice to quick save. Name the preset with the Upper Knob and Knob 2 (Character), turn the Lower Knob to choose the location and press Knob 3 (Save). HX Stomp holds 42 banks of three presets, 126 in all, and any of them can be overwritten. A small E beside the preset name means it has edits that are not saved yet. To have a model load with your own settings every time, press ACTION, press PAGE twice, then Knob 3 (User Default). The free HX Edit application backs up presets, IRs, Favorites and global settings to a computer.
How do snapshots work on the HX Stomp?
Each preset has three, and each recalls the on or off state of every block except the 1 Switch Looper, up to 64 parameter values, the Command Center messages and, with Tempo Select set to Per Snapshot, the tempo. Press PAGE until Snapshot mode shows and step on 1, 2 or 3, or press the Upper Knob for the preset list and turn Knob 2 (Snapshot). Press and turn a knob to put it under snapshot control. Snapshot Edits, in Global Settings > Preferences, decides whether changes stay when you jump between snapshots, Recall by default, or are thrown away, Discard; the camera icon on the Play screen turns red when it is set to Discard.
How do you use the HX Stomp with a tube amp?
Three ways, all from Line 6's manual. In front of the amp, start from the factory presets whose names begin with FX, built from effects blocks only, and set Output Level to Inst in Global Settings > Ins/Outs. In the 4-Cable Method, drives go before the amp's preamp and delays and reverbs in its loop: add a Send/Return > Mono > FX Loop block where the amp's preamp should sit, or you will hear nothing, and try the presets that begin with 4CM; Line 6 adds that most amp effects loops run at instrument level. To use HX Stomp's own amps into a real power amp, it recommends the Preamp models, which give the tone of just the preamp stage.
Can the HX Stomp be used as an audio interface?
Yes: Line 6 calls it a USB 2.0, multichannel, 24-bit/96kHz, low-latency audio interface for Windows and Mac computers, and for iPad and iPhone with Apple's Camera Connection Kit. Record the processed sound from USB 1/2, which carry path A, and path B from USB 3/4. USB 5/6 carry the dry Main inputs, and to re-amp, play that track back to USB 5/6 with the Input block set to USB 5/6. On Windows, install Line 6's ASIO driver. A Mac needs no driver, though the built-in one runs at 48kHz only; Line 6's Helix Mac Core Audio driver adds 44.1, 88 and 96kHz. Use a USB 2.0 port or faster, not a hub.
How do you set the noise gate on the HX Stomp?
The Input block has its own: select it and turn Knob 1 (Gate) on, and its Threshold and Decay come alive; they stay greyed out while it is off. Threshold sets the level at which the gate acts, so raise it only until the hiss between notes stops, and Decay sets how abruptly the gate closes once the signal drops below it. Each preset has its own Input block on top of the eight processing blocks, so the gate takes none of them. The Dynamics category adds Noise Gate and Hard Gate, both Line 6 Originals, and Horizon Gate, based on the gate circuit of the Horizon Precision Drive.
Can you load IRs into the HX Stomp?
Yes, up to 128 at a time, imported with the free HX Edit application as .hir or .wav files; a .wav of any bit depth, length or sample rate is converted on import to 48kHz, 32-bit, mono and 2,048 samples. Line 6 recommends an Amp block before the IR block rather than an Amp+Cab; pick the IR with Knob 1 (IR Select), and push and turn that knob to give each snapshot a different IR. A Dual IR block loads two IRs in stereo, one Dual IR per preset. Line 6 adds that the IR blocks and the IR-based cabs use significantly less DSP than the Legacy Cabs.
How do you update the HX Stomp firmware?
With HX Edit on a Mac or Windows computer: connect HX Stomp by USB, and HX Edit checks online for a newer version and walks you through a full device backup and the update. Line 6 says presets from 2.xx firmware load on 3.xx, but presets saved with 3.0 or later do not load on 2.xx. Firmware 3.0 is also the update that raised the limit from six blocks to eight. This page follows the manual for firmware 3.80.
How do the HX Stomp footswitches work?
The PAGE buttons step through four footswitch modes. In Stomp mode, FS1 and FS2 turn their blocks on and off and FS3 is TAP/TUNER: step on it to set the tempo and hold it for the tuner, which takes a reference from 425 to 455 Hz. Scroll mode steps to the previous and next preset, Preset mode picks A, B or C in a bank, and Snapshot mode picks snapshot 1, 2 or 3. The switches are touch-sensitive: in Stomp mode, touch and hold two of them to swap their assignments. A Y cable on the EXP 1/2, FS 4/5 jack adds two expression pedals or footswitches.
Why does my HX Stomp show different knobs from these settings?
Because the amp models differ. Line 6's manual says the tonestack and the deeper amp parameters on the pages after it may differ depending on the amp model selected, so a model without one of the knobs here skips it. The common amp settings it lists are Master, Sag, Hum, Ripple, Bias and Bias X. HX Stomp shows three parameters at a time, one above each of Knobs 1 to 3, and PAGE shows more; HX Edit shows them as sliders. The values on this page are for the models named, as HX Stomp shows them.
How long can the HX Stomp looper record?
The 1 Switch Looper records 60 seconds in mono at full speed, or 120 at half speed, and 30 seconds in stereo, or 60 at half speed. The Shuffling Looper records 60 seconds in mono or 30 in stereo, at full speed only. HX Stomp has no 6 Switch Looper, and Line 6 says a Looper only works once it is assigned to a footswitch in Stomp mode. One Looper fits in a preset, and you can change presets while looping, but playback stops unless the new preset has the same type of looper, 1 Switch or Shuffling, mono or stereo.
What are the best Line 6 HX Stomp settings for metal?
Start with Cali Rectifire, based on the MESA/Boogie Dual Rectifier, at Drive 5.0, Bass 4.5, Mid 5.5, Treble 6.0 and Sag 3.0, with the Input block's gate on and Scream 808 in front with its gain low. These are starting points rather than Line 6's numbers. Line 6 ties lower Sag values to a tighter response for faster metal playing. PV Panama, based on the Peavey 5150, is the other amp to try, and 4x12 Cali V30 is a cab to start from.
When did the Line 6 HX Stomp come out?
Line 6 introduced it on 4 October 2018 as a professional-grade guitar processor that delivers the sound of Helix amps, cabs and effects in an ultra-compact pedal, and said it was available worldwide at $839.99 (MSRP). At launch it ran up to six processing blocks at once; firmware 3.0 raised that to eight.
How do you build a patch on the Line 6 HX Stomp?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the Line 6 HX Stomp?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
More Line 6 gear
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Line 6 HX Stomp in it. A first plan starts with 7 days free, $0 today.