Marshall MG30GFX settings
In the default preset mode each of the four channels remembers its own setting for every control except Master. The FX knob both picks the effect (chorus, phaser, flanger, delay or octave) and sets how much of it is heard, and Tap sets the delay time.
⚡ Match a tone on this amp- Gain
- Bass
- Middle
- Treble
- Reverb
- Volume
- FX
- Tap
- Master
How do you dial in a specific tone on a Marshall MG30GFX?
Solid-state amps hold their voicing steady across the volume range, which makes the Marshall MG30GFX far more predictable to dial in than a valve amp and is exactly why some of the most aggressive rhythm tones ever recorded came off solid-state heads. The trade is headroom before the EQ starts to sound brittle, so on this amp the treble control does more damage than the gain control does.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.

Free download
Printable cheat sheet: PDF and PNG
The clean, crunch, rock lead and metal settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Marshall MG30GFX
Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Marshall's numbers: pick the channel first, then move one control at a time from here.
Clean
Clean channel (green light on the Clean/Crunch switch), Gain 3, Bass 5, Middle 5, Treble 6, Reverb 3, Volume 5, FX off, Master to taste. Marshall's guide says the Gain sets how much signal enters the preamp and how much distortion the channel makes, so keep it low for a clean that stays clean when you strum hard. Treble a little past halfway keeps chords clear on the 10-inch speaker. Press Store when it sounds right, or the change is lost when you switch channel.
- Gain 3
- Bass 5
- Middle 5
- Treble 6
- Reverb 3
- Volume 5
- FX off
- Master to taste
Press Store to keep it in the channel.
Crunch
Crunch channel (red light on the Clean/Crunch switch), Gain 5 to 6, Bass 5, Middle 6, Treble 6, Reverb 2, Volume 5, Master to taste. This is the setting for rhythm parts in blues and classic rock: chords break up but each string still comes through. Marshall's guide says the Middle control sets the amount of body in the sound, so raise it a step if the crunch sounds thin, and lower the Gain before the Bass if it gets muddy.
- Gain 5 to 6
- Bass 5
- Middle 6
- Treble 6
- Reverb 2
- Volume 5
- Master to taste
Rock lead
OD-1 channel (green light on the OD-1/OD-2 switch), Gain 6, Bass 5, Middle 7, Treble 6, Reverb 2, Volume 6, FX delay, low, Master to taste. More Middle than the other settings pushes single notes forward in a band, and Volume 6 makes the lead a little louder than the rhythm channels. For the delay, turn the FX knob to the delay and keep the repeats quiet, then tap the Tap switch twice on the beat of the song to set the time.
- Gain 6
- Bass 5
- Middle 7
- Treble 6
- Reverb 2
- Volume 6
- FX delay, low
- Master to taste
Tap twice on the beat for the delay time.
Metal
OD-2 channel (red light on the OD-1/OD-2 switch), Gain 7 to 8, Bass 6, Middle 4, Treble 6, Reverb 1, Volume 5, FX off, Master to taste. The lower Middle gives the scooped sound of modern metal rhythm, and Reverb 1 keeps fast palm mutes tight. Going past Gain 8 mostly adds hiss and blur rather than more drive, so add Middle back before you add Gain if the riffs get lost.
- Gain 7 to 8
- Bass 6
- Middle 4
- Treble 6
- Reverb 1
- Volume 5
- FX off
- Master to taste
Effects and Tap tempo
Marshall's guide says the FX knob selects and adjusts one of five digital effects: Chorus, Phaser, Flanger, Delay and Octave. So you get one effect per channel, chosen by where the knob sits, and the same knob sets how much of it you hear. A light chorus on the clean setting suits 80s and 90s clean parts; keep it low, because a lot of chorus sounds seasick. The Tap switch matches the delay time to the time between two pushes, and its light flashes at that time. The Reverb control has two types, Studio and Spring.
Saving your settings
The MG30GFX starts in Preset mode, where Marshall says each channel should be considered a preset: it stores the position of every control except the Master. Change the knobs, then press Store. If you pick another channel first, the change is lost. Hold the Tap switch for two seconds to change to Manual mode, where the sound always matches the knobs; the Store switch lights red and the channel light flashes. Pressing Store in Manual mode saves the knobs into the channel for later. Set the four channel Volumes so they match, and use the Master for the overall level.
Chasing one song? Name it and the matcher writes that song's settings for the Marshall MG30GFX.
What controls does the Marshall MG30GFX have?
The Marshall MG30GFX has 9 controls on its front panel: Gain, Bass, Middle, Treble, Reverb, Volume, FX, Tap and Master.
Marshall MG30GFX specifications
- Power
- 30W
- Speaker
- 1x10"
- Channels
- Clean, Crunch, OD1, OD2
- Front panel
- Gain, Bass, Middle, Treble, Reverb, Volume, FX, Tap, Master
What the Marshall MG30GFX panel means when you dial it in
30W through a 1x10". There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. Reverb is onboard, so a tone that needs it does not need a pedal in the chain. 4 channels, Clean, Crunch, OD1 and OD2, and a setting only means something once the channel it belongs to is named.
Marshall MG30GFX questions
How do I save a setting on the Marshall MG30GFX?
Set the knobs on the channel you want and press the Store switch. Marshall's guide says that in Preset mode, if you select another channel without pressing Store, any altered settings will be lost as the new channel and its settings are recalled.
Why does my MG30GFX not sound like the knobs say?
Because it is in Preset mode. Marshall's guide says that in Preset mode the position of all controls except the Master Volume are stored within each channel, and selecting a channel recalls them. So after you change channel, the sound comes from the stored settings, not from where the knobs point.
How do I switch the MG30GFX to Manual mode?
Hold the Tap switch down for at least two seconds. In Manual mode the Store switch lights red and the selected channel light starts to flash, and the amp's settings always match the physical positions of the controls. Marshall says the amp remembers the last mode it was in after you power it off.
My MG30GFX's Store light is red and the channel light flashes. What is wrong?
Most likely it is in Manual mode. Marshall's support page on factory mode says the amp has two modes, Preset and Manual, that in Manual mode the Store switch lights red and the channel light flashes, and that you hold the Tap switch for at least two seconds to change between them.
How do I reset the Marshall MG30GFX?
Marshall's support page says to hold the Store button while switching on the amplifier, and to hold it until the channel light goes from amber to clean green.
How many channels does the MG30GFX have?
Four: Clean, Crunch, OD-1 and OD-2. The Clean/Crunch switch selects between Clean, with a green light, and Crunch, with a red light. The OD-1/OD-2 switch does the same for OD-1, green, and OD-2, red.
What effects does the MG30GFX have?
Five effects on the FX knob, Chorus, Phaser, Flanger, Delay and Octave, and a separate Reverb control with two types, Studio and Spring. The FX knob both picks the effect and sets how much of it you hear, so each channel has one of the five at a time.
How do I set the delay time on the MG30GFX?
Push the Tap switch twice. Marshall's guide says it matches the delay time to the time between the two pushes, and the light flashes at the selected delay time. Tap on the beat of the song.
Does the MG30GFX have an effects loop?
No. Marshall's guide lists the input, the MP3 line in, the footcontroller socket and the headphone socket as the connections, with no loop. Pedals go between the guitar and the input; use the Clean setting for drive pedals so the pedal does the driving.
Can I use headphones with the MG30GFX?
Yes. There is a headphone socket, and Marshall's guide says connecting headphones automatically mutes the internal speaker. The MP3 line in socket takes the line out or headphone out of a phone or player, so you can play along with a track.
What footswitch works with the MG30GFX?
Marshall's guide names the optional footcontroller PEDL-90008, which plugs into the footcontroller socket. The Store switch also stores settings to recall with the footcontroller.
Is it normal for the MG30GFX to hiss?
A little, yes. Marshall's support page says it is the nature of the amplifier to hear a hiss when sat idle. High Gain and Treble settings make it louder, so lower those first if the hiss bothers you.
How powerful is the MG30GFX and what speaker does it use?
Marshall's support page lists it as a 30W solid-state combo with built-in effects, four channels, a 10-inch custom speaker and a headphone output for silent practice.
Is there a printable Marshall MG30GFX settings cheat sheet?
Yes. The cheat sheet on this page puts all four starting settings on one page, one per channel, with short tips under them. Download the PDF to print it on white, or save the PNG to your phone.
Does Tonelify support the Marshall MG30GFX?
Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Gain, Bass, Middle, Treble, Reverb, Volume, FX, Tap, Master. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
More Marshall gear
Similar amps from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for the controls the Marshall MG30GFX has. A first plan starts with 7 days free, $0 today.