Boss GT-1B presets and settings
Compact bass multi-effects with three footswitches and an expression pedal: 13 preamps, 15 drive types, 23 FX types per FX slot, 99 preset and 99 user patches, a 32-second looper and USB audio. Runs on four AA batteries for about 7 hours.
⚡ Match a tone on this unitHow do you dial in a specific tone on a Boss GT-1B?
A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the Boss GT-1B name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Boss GT-1B factory presets (P01 to P99)
The 99 preset patches, with BOSS's own description of each. Presets can't be overwritten; edit one and save it to a user slot, U01 to U99. P90 to P99 are voiced for active basses.
| Patch | Name | BOSS's description |
|---|---|---|
| P01 | SCOOP SLAP | Scooped slap sound for wide variety of musical styles. |
| P02 | PASSIVE 2 ACTIVE | Changes the tone of your passive pickups to sound like active pickups. |
| P03 | MILD TUBE | Mild, tube amp-like bass tone. |
| P04 | SUPER LOW | High cut is used to focus more power into the low frequencies. |
| P05 | CREAMY ROCK | Drive sound for late 60's British rock trio. |
| P06 | 60s LIVERPOOL | Bass tone for 60's Liverpool sound. |
| P07 | 70s PROGRE | Bass sound with boosted low and high ranges, plus distortion. |
| P08 | CHORD DRIVE | 70's jazz-fusion sound for chord playing. |
| P09 | GARAGE ROCK | Drive sound for garage rock. |
| P10 | MODERN DRIVE | Drive sound for modern rock. |
| P11 | 8×10 STACK | Fat drive sound with a mixture of fuzz and preamp. |
| P12 | FUZZ BASS | Fat and well sustained fuzz sound. |
| P13 | OVERDRIVE SLAP | Distorted sound for slap playing. |
| P14 | DISTORTION SOLO | Distortion sound for soloing. |
| P15 | FILTER FUNK | Funky sound with T.WAH. |
| P16 | PHASER & FLANGER | Jazz-fusion sound of 70's - 80's. Switch FLANGER to PHASER with CTL1 switch. |
| P17 | ATMOSPHERE | Spatial-type sound that takes advantage of volume swell and long reverberation. CTL1 switch controls fuzz, and EXP SW controls OD/DS SOLO. |
| P18 | HIP-HOP & DUB | Heavy sub-bass sound. |
| P19 | SIMPLE FRETLESS | Simple fretless bass sound. |
| P20 | R&B SYNTH | Bass synth sound for 80's R&B. |
| P21 | SYNTH LEAD | Synth sound for solos. |
| P22 | URBAN SLAP | Slap bass sound for 80's urban soul music. |
| P23 | N.Y. SLAP | Slap bass sound for 80's jazz-fusion. |
| P24 | 70s AMP FINGER | Juicy bass amp sound for 70's rock. |
| P25 | 50s ACO BASS | Contrabass-like sound for old jazz or country. |
| P26 | REGGAE | Ideal sound for reggae or Jamaican music. |
| P27 | DRIVE810 | Powerful rock sound of the overdriven CONCERT 810. |
| P28 | METAL HEAD | Metal sound, great when using a pick. |
| P29 | BLUES ROCK SOLO | Crunch sound for blues or rock, with tremolo added. |
| P30 | EXP PDL DRIVE | Use the expression pedal to control the distortion. |
| P31 | EXTREME DIST | Extremely distorted bass sound. |
| P32 | CRY VIBE | Drive sound combining a classic pedal wah and UNI-V. |
| P33 | ROCK'N ROLL SOLO | Drive sound for blues or rock, with phaser added. |
| P34 | METALMASTER | Distortion tone that goes into the frequency range of guitar tones. |
| P35 | STEREO FUNK | Stereo funk sound combining T.WAH and delay. CTL1 switch adds a sound one octave lower. |
| P36 | 70s JAZZ FUSION | 70's jazz-fusion sound for picking style bass. |
| P37 | LOW AND SWEET | Mild octave sound for finger style bass. |
| P38 | 2OCT UP LEAD | Sound for solo playing, with an added sound two octaves higher. |
| P39 | PEDAL PITCH SOLO | Use the expression pedal to control the pitch. |
| P40 | PIPE ORGAN | A pipe-organ-like sound; use the expression pedal to control the low notes. |
| P41 | ELEPHANT CHORUS | Bass sound with chorus applied. |
| P42 | 60s R&B STUDIO | Sound for '60s R&B or pop, with a sense of ambience. |
| P43 | 70s SOUL | Sound for '70s soul, R&B, or pop. Appropriate tone can be obtained by using either fingers or a pick. |
| P44 | 70s BayArea SLAP | Slap sound with good presence. CTL1 switch applies distortion, and expression switch applies T.WAH. |
| P45 | 80s FINGER | Hard and clear '80s bass. |
| P46 | 80sUKPOP FRETLSS | Fretless bass sound for 80's British pop. |
| P47 | 80s FUNKY SYNTH | Vocoder-like bass synth sound for early 80's funk groove. |
| P48 | 90s SWEDISH POP | Bass sound of '90s Swedish pop. |
| P49 | PB JAZZ FUNK | 90's British jazz-funk sound for finger style bass. |
| P50 | PURPLE SLAP St. | Slap sound with reduced low-frequency range. |
| P51 | SOUL & FUNK | Low-centered sound suitable for soul or funk. |
| P52 | CHORUS SLAP | Refined slap with chorus applied. |
| P53 | SLAPBACK SLAP KC | When you play 8th notes, a backbeat of 16th notes is heard. |
| P54 | NEW GOSPEL SOUND | Bass sound for contemporary gospel music. |
| P55 | GOOD OLD BLUES | Good for blues or early rock 'n' roll. |
| P56 | GOOD OLD COUNTRY | Good match for country or oldies. |
| P57 | ROCKABILLY | Contrabass-like sound for rockabilly. |
| P58 | ROOTS REGGAE | Choose this when playing reggae. |
| P59 | BEBOP CONTRA | Contrabass-like sound for jazz. |
| P60 | DYNAMIC DRIVE | The overdrive tone character changes along with your playing dynamics. |
| P61 | HARD ROCK SOLO | Good for rock or hard rock solos, with flanger added to distortion. |
| P62 | FAT BASS | Fat distortion sound. |
| P63 | WHOSE GENERATION | Drive sound for early 60's British rock. |
| P64 | HEAVY & DIRTY | Rough distortion sound. |
| P65 | DRIVE & FUZZ | Drive sound using fuzz. |
| P66 | HEAVY ROAR | Intense distortion with FLANGER. |
| P67 | OCTAVE WAH | Sound using T.WAH and octave effect. |
| P68 | SPACE FUNK | PHASER sound for disco music. |
| P69 | BOOTS FUNK SLAP | Funky sound. Press the CTL1 switch to get an aggressive sound, and use the expression switch to turn T.WAH on/off. |
| P70 | OCTAVE FRETLESS | Fat fretless bass sound with lower octave. |
| P71 | BLUESY VIBE | Good for blues or pop solos; UNI-V is added to a slightly distorted sound. |
| P72 | TALKING DRIVE | Sound reminiscent of a talk-box. |
| P73 | HARDCORE SLAP | Punkish distorted slap sound. |
| P74 | AGGRESSIVE SLAP | Intensely distorted slap sound. |
| P75 | 8 STRINGS CHORD | Sound that evokes chords or tapping on an 8-string bass. CTL1 switch turns chorus on/off. |
| P76 | DREAMY | Slow gear and long reverberation create fantasy-like sound. |
| P77 | B3 ORGANIK | Sound reminiscent of an electric organ. |
| P78 | HIGH ORGAN SOLO | Solo sound, with an organ-like sound added one octave above. |
| P79 | ANGELIC CHORD | Guitar and organ playing in unison. |
| P80 | FUZZ BOW SOLO | Bowed sound, with added fuzz. |
| P81 | WOODWIND | Sound reminiscent of a woodwind instrument. |
| P82 | HEAD HUNT SYNTH | Sound reminiscent of a classic jazz or funk session song. CTL1 switch controls octave, and expression switch controls reverb. |
| P83 | REVOLUTION SYNTH | Reminiscent of a '90s acid jazz song. |
| P84 | RESONANCE SAW | Synth sound with prominent resonance. |
| P85 | PHASER SYNTH | Synth sound with distinctive phaser. |
| P86 | UNISON SYNTH | Unison sound of acoustic bass and synth. |
| P87 | ROUND SYNTH | Rounded synth sound. CTL1 switch changes to an aggressive sound. |
| P88 | HEAVY SQUARE | Heavy synth sound with a lower octave added. CTL1 switch applies fuzz. |
| P89 | Sci-Fi EFX | Sound effect using wave pedal. |
| P90 | ACTIVE 2 PASSIVE | Changes a modern tone to a vintage tone. (For active basses.) |
| P91 | SLAP 4 ACTIVE | Good for slap, with mid-range reduced and compressor applied deeply. CTL1 switch applies chorus. (For active basses.) |
| P92 | BALLAD 4 ACTIVE | Warm and long-sustaining sound for ballads. CTL1 switch applies chorus and delay, making it suitable for solos or melodies. (For active basses.) |
| P93 | ACTIV 2 ACOUSTIC | Sound of an electro-acoustic bass. (For active basses.) |
| P94 | WarmDRIVE 4 ACTV | Slightly driven warm sound. CTL1 switch applies phaser. (For active basses.) |
| P95 | DIST 4 ACTIVE | Distortion sound. CTL1 switch applies phaser. (For active basses.) |
| P96 | FUZZ 4 ACTIVE | Sound with fuzz. CTL1 switch applies overtones and delay. (For active basses.) |
| P97 | FILTER 4 ACTIVE | Funky T.WAH sound. (For active basses.) |
| P98 | FRETLESS 4 ACTV | Sound reminiscent of a fretless bass. CTL1 switch applies chorus and reverb. (For active basses.) |
| P99 | SYNTH 4 ACTIVE | Funky sound with synth overlapping the original sound. CTL1 switch applies delay. (For active basses.) |
Boss GT-1B preamp types
13 preamps: nine bass amps and four guitar amps. Each has Gain, Bass, Middle, Treble and Level, with Presence and Bright on some types, and a speaker cabinet when the output is set to LINE/PHONES.
| Type | What BOSS says it models |
|---|---|
| Super Flat | An amp with a flat response |
| Flip Top | Ampeg B-15 |
| B Man | Fender Bassman 100 |
| Concert | Ampeg SVT |
| Bass 360 | Acoustic 360 |
| Session | SWR SM-400 |
| AC Bass | An amp for acoustic bass |
| GK Bass | Gallien-Krueger 800RB |
| Mark | Markbass Little Mark III |
| GtrClean | A clean guitar amp, smooth and warm |
| GtrCrnch | A crunch guitar amp |
| GtrDrive | A distorted guitar amp |
| GtrMetal | A metal guitar amp for heavy riffs |
Boss GT-1B overdrive and distortion types
15 types in the OD/DS block, each with Drive, Tone, Bottom, Effect Level and Direct Level, so you can blend the clean bass back in.
| Type | What it is |
|---|---|
| Booster | A booster that also gives a punchy clean tone on its own |
| Natural | Overdrive with a natural feel |
| Bass OD | Overdrive tuned for bass |
| Blues OD | BOSS BD-2 Blues Driver |
| Bass DS | Distortion tuned for bass |
| GUV DS | Marshall Guv'nor |
| Bass MT | Wild, radical distortion |
| Metal Zone | BOSS MT-2 Metal Zone |
| Bass Fuzz | Fuzz tuned for bass |
| Muff Fuzz | Electro-Harmonix Big Muff Pi |
| HiBND DRV | Distorts only the highs and leaves the lows clean |
| AB-DIST | MDP distortion that stays even from low to high notes |
| Bass DRV | Tech 21 SansAmp Bass Driver DI |
| Bass DI | MXR Bass D.I.+ |
| Para.EQ | A parametric EQ in the drive slot |
Boss GT-1B effect blocks
Every patch has these blocks, and you can move them around the chain from the Memory Edit screen. FX1 and FX2 can run the same effect.
| Block | Types |
|---|---|
| FX1 and FX2 | 23 types each: Compressor, Limiter, T.Wah, Graphic EQ, Parametric EQ, Enhancer, Tone Modify, Bass Simulator, Slow Gear, Defretter, Bass Synth, Octave, Pitch Shifter, Harmonist, Overtone, Phaser, Flanger, Tremolo, Rotary, Uni-V, Vibrato, Ring Mod, Humanizer, Chorus and Sub Delay |
| Pedal FX | Cry Wah, Vo Wah, Fat Wah, Light Wah, Bass Wah, Reso Wah and Pedal Bend, on the built-in pedal or an expression pedal |
| OD/DS | 15 overdrive, distortion, fuzz and DI types, listed below |
| Preamp | 13 amp types with a speaker cabinet, listed below |
| NS | Noise suppressor with threshold, release and detect point |
| Foot Volume | Volume pedal with minimum and maximum levels |
| Delay | Standard, Pan, Reverse, Analog, Tape, Modulate and Tera Echo, up to 2000 ms |
| Reverb | Ambience, Room, Hall 1, Hall 2, Plate, Spring, Modulate and Delay |
| Master | Patch level, master BPM and a master EQ |
Boss GT-1B footswitches and pedal
Three footswitches, an expression pedal with a toe switch, and one rear jack for more.
| Press | What it does |
|---|---|
| Up or Down | Next or previous patch |
| Up + Down together | Tuner, by default; can be set to the looper or one patch up or down |
| Up + CTL1 together | Looper on or off, by default |
| CTL1 | Whatever the patch assigns to it, such as tap tempo or an effect on or off |
| CTL1 with the looper on | Record, then play, then overdub; press twice to stop |
| Hold CTL1 for 2 s, looper stopped | Clear the loop |
| Press the pedal toe down hard | Pedal FX on or off (the EXP SW toe switch) |
| CTL2, CTL3 or EXP2 on the rear jack | One or two footswitches or an expression pedal, assigned per patch |
Boss GT-1B specifications
- Released
- 2017
Boss GT-1B questions
What is the Boss GT-1B?
A compact bass multi-effects pedal: the bass version of the BOSS GT-1. BOSS announced it on 23 June 2017 with 90 effects, including 13 preamp types, all tuned for bass, and MusicRadar reported a UK price of £209 from August 2017. It holds 99 preset and 99 user patches, has a 32-second looper and an expression pedal, runs on four AA batteries for about 7 hours, and weighs 1.3 kg.
How many presets does the Boss GT-1B have?
99 factory presets, P01 to P99, and 99 user slots, U01 to U99. The presets can't be overwritten: edit one and save it to a user slot. EASY SELECT finds patches by genre, drive type or effect type, and BOSS Tone Central has free patch collections by pro bassists. All 99 presets, with BOSS's description of each, are listed on this page.
What are the best Boss GT-1B presets?
Premier Guitar's reviewer picked out DRIVE & FUZZ (P65), OCTAVE WAH (P67), BOOTS FUNK SLAP (P69), HEAD HUNT SYNTH (P82), which they said emulates the synth bass on Herbie Hancock's Chameleon, and PIPE ORGAN (P40), ATMOSPHERE (P17) and DREAMY (P76) for textures. Bass Musician's reviewer found it hard to find one of the 99 they didn't like.
What are good Boss GT-1B settings?
BOSS doesn't publish knob values; its starting points are the presets. Tonelify's picks from BOSS's own descriptions: P03 MILD TUBE or P24 70s AMP FINGER for a warm amp tone, P01 SCOOP SLAP or P22 URBAN SLAP for slap, P27 DRIVE810 for an overdriven SVT-style rock tone, and P19 SIMPLE FRETLESS for fretless. On an active bass, start with P90 to P99, which BOSS voiced for active pickups.
What amps are in the Boss GT-1B?
13 preamps. BOSS says they model the Ampeg B-15 (Flip Top), Fender Bassman 100 (B Man), Ampeg SVT (Concert), Acoustic 360 (Bass 360), SWR SM-400 (Session), Gallien-Krueger 800RB (GK Bass) and Markbass Little Mark III (Mark), plus Super Flat, an acoustic bass amp and four guitar amps: clean, crunch, drive and metal. BOSS says the range includes updated favourites from the GT-10B and two new models.
What distortion and drive pedals are in the Boss GT-1B?
15 OD/DS types. BOSS names the models behind six: the BOSS BD-2 (Blues OD), Marshall Guv'nor (GUV DS), BOSS MT-2 (Metal Zone), Electro-Harmonix Big Muff (Muff Fuzz), Tech 21 SansAmp Bass Driver DI (Bass DRV) and MXR Bass D.I.+ (Bass DI). The others are bass-tuned overdrive, distortion and fuzz, a booster, a high-band drive that leaves the lows clean, and the MDP AB-DIST. A Direct Level control blends the clean bass back in.
What effects does the Boss GT-1B have?
FX1 and FX2 each choose from 23 types, including compressor, limiter, T.Wah, graphic and parametric EQ, bass synth, octave, defretter, harmonist, chorus and Uni-V. There is also a Pedal FX block with six wahs and a pitch bend, the drive and preamp blocks, a noise suppressor, foot volume, seven delays and eight reverbs. The blocks can be moved around the chain from the Memory Edit screen.
How do you connect the Boss GT-1B to a bass amp?
In MENU, OUTPUT, choose AMP NO TWEETER or AMP WITH TWEETER to match your bass amp, or LINE/PHONES for headphones, monitors, a mixer or a recorder. The preamp's speaker cabinet simulation only works on LINE/PHONES. For mono, use only the L/MONO output.
How does the looper work on the Boss GT-1B?
Press the Up and CTL1 switches together to turn it on. Then CTL1 starts recording, then playback, then overdubbing; press it twice to stop, and hold it for two seconds while stopped to clear the loop. It records up to 32 seconds in mono, and the loop is lost when you turn the looper or the power off.
How do you use the tuner on the Boss GT-1B?
Press the Up and Down switches together. The reference pitch is 440 Hz by default and can be set from 435 to 445 Hz with knob 1, and knob 3 chooses whether the output is muted, bypassed or left on with effects while you tune.
How long do batteries last in the Boss GT-1B?
About 7 hours on four AA alkaline batteries, according to BOSS. It can also run from a BOSS PSA adaptor, sold separately. There is no power switch: plugging a cable into the INPUT jack turns it on, so unplug it after playing to save the batteries.
Can the Boss GT-1B be used as an audio interface?
Yes. Over USB it records into a computer and plays the computer's audio through its outputs, after you install BOSS's GT-1B driver. In MENU, USB you set the level of the computer's audio and of the processed signal, and Direct Monitor. BOSS Tone Studio, the free editor and librarian, also works over USB.
Can you add footswitches or an expression pedal to the Boss GT-1B?
Yes, on the rear CTL2, 3/EXP2 jack: one or two footswitches (BOSS FS-5U, FS-6 or FS-7) or an expression pedal (BOSS EV-30 or Roland EV-5). Assign them, CTL1 and the built-in pedal from the Memory Edit screen.
How do you factory reset the Boss GT-1B?
Press MENU and choose F.RESET. Set the range with knobs 1 and 3, from the system settings to user patch U99, press ENTER, choose EXECUTE and press ENTER again. Back up your patches with BOSS Tone Studio first, because the reset erases them.
What did reviewers say about the Boss GT-1B?
Premier Guitar's review of 3 November 2017, at a street price of $199, praised the range of tones in a small package and the Tone Studio app, and warned of a significant learning curve. Bass Musician Magazine's review of 11 December 2017 called it the ultimate multi-effects pedal at a price far below units that cost three or four times as much.
How do you build a patch on the Boss GT-1B?
Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.
Does Tonelify support the Boss GT-1B?
Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.
Sources
Panel, specifications and dates checked against these on .
- BOSS: GT-1B Owner's Manual (PDF)
- BOSS: GT-1B Parameter Guide / Sound List (PDF)
- BOSS: GT-1B product page
- BOSS: BOSS Announces GT-1B Bass Effects Processor, 23 June 2017
- MusicRadar: Boss shoots for the low-end with affordable GT-1B Bass Effects Processor pedal, 23 June 2017
- Premier Guitar: Boss GT-1B review, 3 November 2017
- Bass Musician Magazine: Review, Boss GT-1B Bass Effects Processor, 11 December 2017
The manuals and product page were read on 17 November 2026. BOSS gives no knob values for its presets; the preset descriptions on this page are BOSS's own, and the preset picks in the settings answer are Tonelify's.
More Boss gear
Similar multi-effects units from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Boss GT-1B in it. A first plan starts with 7 days free, $0 today.