Fender Champion 20 settings
A practice modeller with a two-band stack: there is no dedicated mids control to set.
⚡ Match a tone on this ampHow do you dial in a specific tone on a Fender Champion 20?
The Fender Champion 20 is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.
Name the song you are chasing and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.
What controls does the Fender Champion 20 have?
Fender Champion 20 specifications
- Power
- 20W
- Speaker
- 1x8"
- Voicings
- Tweed Bassman, Tweed Deluxe, Tweed Champ, '65 Twin-Amp, '65 Deluxe, '65 Princeton, 60s British, 70s British, 80s British, Super-Sonic, 90s Metal, 2000 Metal
- Front panel
- Gain, Volume, Treble, Bass, Voice, FX Level, FX Select, Tap
What the Fender Champion 20 panel means when you dial it in
20W through a 1x8". At that rating the power section starts working early, so the loudness knob is part of the tone setting rather than separate from it. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. The EQ has no middle control, so the midrange is fixed by the amp's own voicing and can only be shaped around with bass and treble, or in front of the amp with a pedal. Drive and volume have separate knobs, so the amp can sound driven at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. The selectable voicings are Tweed Bassman, Tweed Deluxe, Tweed Champ, '65 Twin-Amp, '65 Deluxe, '65 Princeton, 60s British, 70s British, 80s British, Super-Sonic, 90s Metal and 2000 Metal. Picking the voicing comes before the knob positions, because the same numbers land somewhere else on each one.
Tones to try on a Fender Champion 20
Fender Champion 20 questions
What are good starting settings on a Fender Champion 20?
Start from the middle of the range on Gain, Volume, Treble, Bass and move one control at a time. There is no single correct set of numbers for this amp, because the target changes with the song. Tonelify writes the values for a named tone against this amp's actual panel: Gain, Volume, Treble, Bass, Voice, FX Level, FX Select, Tap.
Can the Fender Champion 20 get a metal tone?
Yes, by selecting a high-gain voicing rather than by turning the gain up on a clean one. On a modelling amp the model choice sets the ceiling and the knobs work inside it, so picking the voicing is the first step of the answer.
Does Tonelify support the Fender Champion 20?
Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Gain, Volume, Treble, Bass, Voice, FX Level, FX Select, Tap. You will not be told to set a knob that is not there.