Gear compared
Boss Katana comparison chart: every model side by side
Updated 8 min read11 sources
Every Boss Katana puts BOSS's own amp types on a panel, but the models differ in power, speaker and what they store. The stage models are 50 W into one 12-inch speaker at 11.6 kg, 100 W into one 12-inch at 14.8 kg, 100 W into two 12-inch speakers at 19.8 kg on the 100/212, or a Head with a 5-inch speaker. The small ones are the Katana-25 (25 W, 8-inch, 4.8 kg), the Katana-Mini (7 W, 4-inch, 1.2 kg), the Mini X (10 W, 5-inch, 2.7 kg) and the Katana:GO, a 65 g headphone amp.
Between generations, the MkII gave each of the five effect sections its own button and knob and added a Variation to every amp type. Gen 3, launched in May 2024, added a sixth type, Pushed, a USB Type-C port and a Power Control of Standby, 0.5 W, Half and Max. Within a generation, a 100 adds a Presence knob, eight stored sounds instead of four, a line out and an effects loop to a 50. Every figure on this page comes from BOSS's own manuals and spec pages.

Boss Katana comparison chart
One row per model, from the main specifications in each owner's or reference manual. The MkI and MkII were also made as a 100/212, a Head and an Artist. The MkII versions have the same power, speakers and weight as the Gen 3 rows for those models.
Amp types counts the positions on the amp type control. The Variation button gives each one a second voice, which is how BOSS counts 12 tones on Gen 3.[4] Stored sounds are the channels or memories that hold a whole setting.
| Model | Power | Speaker | Amp types | Stored sounds | Weight |
|---|---|---|---|---|---|
| Katana-50 (MkI) | 50 W | One 12-inch | 5 | 4 | 11.6 kg |
| Katana-100 (MkI) | 100 W | One 12-inch | 5 | 8 | 14.8 kg |
| Katana-50 MkII | 50 W | One 12-inch | 5, each with a Variation | 4 | 11.6 kg |
| Katana-100 MkII | 100 W | One 12-inch | 5, each with a Variation | 8 | 14.8 kg |
| Katana-50 Gen 3 | 50 W | One 12-inch | 6, each with a Variation | 4 | 11.6 kg |
| Katana-50 EX Gen 3 | 50 W | One 12-inch | 6, each with a Variation | 4, plus CH3 and CH4 with a GA-FC | 11.7 kg |
| Katana-100 Gen 3 | 100 W | One 12-inch | 6, each with a Variation | 8 | 14.8 kg |
| Katana-100/212 Gen 3 | 100 W | Two 12-inch | 6, each with a Variation | 8 | 19.8 kg |
| Katana-Head Gen 3 | 100 W into an external cab, 30 W on its own speaker | One 5-inch | 6, each with a Variation | 8 | 8.8 kg |
| Katana-Artist Gen 3 | 100 W | One 12-inch | 6, each with a Variation | 8 | 19 kg |
| Katana-25 | 25 W | One 8-inch | 6, each with a Var. version | 30 memories | 4.8 kg |
| Katana-Mini | 7 W | One 4-inch | 3 | None | 1.2 kg |
| Katana-Mini X | 10 W | One 5-inch | 3, with a Variation | None | 2.7 kg |
| Katana:GO | Headphones, 30 mW + 30 mW | None | 5 guitar types with a Variation, 3 bass types | 30 per mode | 65 g |
Katana 50 vs 100
Within one generation, a Katana-50 and a Katana-100 share the amp types, the five effect sections and the 12-inch speaker. The 100 has twice the power and adds the controls and jacks below. The 50's lack of a Presence knob is the difference people notice first: on a 50 the top end comes from Treble alone.
On Gen 3, BOSS's manual lists what the 50 and 50 EX do not have: the Presence knob, the Cab Resonance switch, the Bloom button, the Contour button, the CH3 and CH4 buttons and the Solo button.[3] Bloom is on the Head and the Artist; the 100 and 100/212 have the rest.
| Katana-50 (MkII, Gen 3) | Katana-100 (MkII, Gen 3) | |
|---|---|---|
| Power | 50 W | 100 W |
| Power Control | MkII: Standby, 0.5 W, 25 W, 50 W. Gen 3: Standby, 0.5 W, Half, Max | MkII: Standby, 0.5 W, 50 W, 100 W. Gen 3: Standby, 0.5 W, Half, Max |
| Presence knob | No | Yes |
| Stored sounds | 4: CH1 and CH2 in banks A and B | 8: CH1 to CH4 in banks A and B |
| Line out | No (the 50 EX has one) | Yes |
| Effects loop | No | Send and Return jacks |
| GA-FC foot controller jack | No (the 50 EX has one) | Yes |
| Gen 3 extras | None of the 100's | Solo button, Contour button, Cab Resonance switch (Vintage, Modern, Deep) |
| Power consumption | 47 W | 77 W |
| Size (W x D x H) | 470 x 238 x 398 mm | 530 x 248 x 484 mm (Gen 3: 530 x 248 x 445 mm) |
| Weight | 11.6 kg | 14.8 kg |
Katana MkII vs Gen 3
BOSS launched Gen 3 on 23 May 2024 as seven models.[4] The controls kept the MkII's names and order: Gain, Volume, Bass, Middle and Treble, then Booster, Mod, FX, Delay and Reverb, each with its own button and knob. The changes are a sixth amp type, a new Power Control, a USB Type-C port and a slot for BOSS's Bluetooth adaptor.
Pushed is the new type. BOSS describes it as the touch-responsive gain of a clean combo driven into harmonic saturation,[4] which suits blues and edge-of-breakup playing. The first Katana, the MkI, had five types and no Variation button, and shared its effects across three sections: Booster/Mod, Delay/FX and Reverb.[1]
| Katana MkII | Katana Gen 3 | |
|---|---|---|
| Amp types | 5: Acoustic, Clean, Crunch, Lead, Brown | 6: Acoustic, Clean, Pushed, Crunch, Lead, Brown |
| Variation | On every type | On every type |
| Power Control on a 50 | Standby, 0.5 W, 25 W, 50 W | Standby, 0.5 W, Half, Max |
| Power Control on a 100 | Standby, 0.5 W, 50 W, 100 W | Standby, 0.5 W, Half, Max |
| USB | USB B type | USB Type-C |
| Bluetooth | Not in the owner's manual | Slot for the BT-DUAL adaptor, sold separately (not on the Artist) |
| Headphones | REC OUT/PHONES, stereo 1/4-inch | STEREO PHONES, stereo 1/4-inch |
| Bloom | No | Head and Artist |
| Weight | 11.6 kg (50), 14.8 kg (100) | 11.6 kg (50), 14.8 kg (100) |
Katana 50 vs 50 EX
The 50 EX is a Katana-50 Gen 3 with more connections. It has the same 50 W, 12-inch speaker, six amp types and controls, and the same missing Presence knob. What it adds is on the back panel, and it weighs 0.1 kg more.
The GA-FC jack is the one that changes how you play live: with a GA-FC or GA-FC EX foot controller, sold separately, the 50 EX can use CH3 and CH4, which the plain 50 cannot. Two 50 EX units can also be linked for stereo, in what BOSS calls Stereo Expand mode.
| Katana-50 Gen 3 | Katana-50 EX Gen 3 | |
|---|---|---|
| Line out | No | 1/4-inch jack |
| Footswitch jack | TIP: CH1/CH2, RING: SOLO | GA-FC (TIP: CH1/CH2, RING: SOLO) |
| CH3 and CH4 | No | With a GA-FC or GA-FC EX |
| Stereo with a second amp | No | Stereo Expand mode with a second 50 EX |
| Weight | 11.6 kg | 11.7 kg |
| Same on both | 50 W, one 12-inch speaker, 47 W power consumption, 470 x 238 x 398 mm | 50 W, one 12-inch speaker, 47 W power consumption, 470 x 238 x 398 mm |
The small Katanas: 25, Mini, Mini X and GO
The Katana-25, announced on 29 October 2026,[9] runs from the mains and is the only small one with a Power Control (Max or 0.5 W). It has a screen for its 30 memories and Bluetooth audio and MIDI built in. The Mini runs on six AA batteries and has Gain, Volume, Bass, Middle, Treble and a delay. The Mini X adds a Variation button, Mod/FX and Rev/Dly knobs, a tuner and Bluetooth audio on a built-in rechargeable battery.
The Katana:GO is a different kind of Katana: it plugs into the guitar and feeds headphones, with no speaker. Its amp knobs are set in the BOSS Tone Studio app, and it has a bass mode with three bass amp types.
| Katana-25 | Katana-Mini | Katana-Mini X | Katana:GO | |
|---|---|---|---|---|
| Power supply | Mains (AC IN) | Six AA batteries or an AC adaptor, sold separately | Built-in Ni-MH battery, charged over USB-C | Built-in lithium-ion battery, charged over USB-C |
| Battery life | Mains only | About 7 hours (alkaline), 9 hours (Ni-MH) | About 10 hours | About 5 hours |
| Tuner | Yes | Not in the manual | Yes | Yes |
| Bluetooth | Audio and MIDI | Not in the manual | Audio | Audio and MIDI |
| Headphones | Stereo mini jack | Stereo mini jack | Stereo mini jack | Stereo mini jack |
| Effects | On the display | Delay | Mod/FX and Rev/Dly knobs | Over 60, set in the app |
Which Katana has what you need
For quiet playing at home, every stage Katana has a 0.5 W position on its Power Control, and the Katana-25 has one too. For no speaker at all, the Katana:GO is the headphone one. For playing away from a socket, the Mini, Mini X and GO run on batteries.
For a Presence knob, a line out and an effects loop, it has to be a 100, a 100/212, a Head or an Artist. For a line out and foot-switched CH3 and CH4 on a 50, it is the 50 EX. For a screen and 30 memories without a computer, it is the Katana-25.
Settings carry across the range
The amp type names mean the same thing on every Katana that has them, so a setting written for one model moves to another: Clean is clean, Crunch follows your picking, Lead covers crunch to high gain on its Gain knob and Brown is the high-gain lead. On a 50, which has no Presence knob, leave Presence out and take the top end from Treble.
The Boss Katana settings cheat sheet gives clean, blues, rock and metal starting points for these panels, and each model's own page has its settings. When you want a particular song on your Katana, Tonelify writes the amp type, the knob positions and the booster for that song on your model's own panel.
Common questions
What is the difference between the Boss Katana 50 and 100?
The 100 has 100 W against the 50's 50 W, both into one 12-inch speaker, and adds a Presence knob, eight stored sounds instead of four, a line out, Send and Return jacks for an effects loop and a GA-FC foot controller jack. On Gen 3 it also adds Solo, Contour and Cab Resonance. It weighs 14.8 kg to the 50's 11.6 kg.
What is the difference between the Katana MkII and Gen 3?
Gen 3 adds a sixth amp type, Pushed, to the MkII's Acoustic, Clean, Crunch, Lead and Brown, and every type keeps its Variation. Its Power Control reads Standby, 0.5 W, Half and Max, its USB port is Type-C instead of USB B, and most models take BOSS's BT-DUAL Bluetooth adaptor. Power, speakers, weight and the panel layout are the same.
What is the difference between the Katana 50 and the 50 EX?
The 50 EX is the Katana-50 Gen 3 with a line out, a GA-FC foot controller jack that unlocks CH3 and CH4, and Stereo Expand mode for linking two 50 EX amps. The power, speaker, amp types and front panel are the same, and the EX weighs 11.7 kg against 11.6 kg.
Does the Katana 50 have a Presence knob?
No. Neither the Katana-50 MkII, the Katana-50 Gen 3 nor the 50 EX has one; BOSS's Gen 3 manual lists Presence among the controls the 50 and 50 EX do not have. The 100, 100/212, Head and Artist models have it. On a 50, shape the top end with the Treble knob.
How many sounds can each Boss Katana store?
Four on a Katana-50 (CH1 and CH2 in banks A and B) and eight on a 100, 100/212, Head or Artist (CH1 to CH4 in two banks). The 50 EX reaches CH3 and CH4 with a GA-FC foot controller. The Katana-25 holds 30 memories and the Katana:GO 30 per mode, while the Mini and Mini X store nothing: the knobs are the sound.
Which Boss Katana amps run on batteries?
The Katana-Mini runs on six AA batteries, about 7 hours on alkalines and 9 on 2500 mAh Ni-MH cells. The Mini X has a built-in Ni-MH battery that lasts about 10 hours and charges in about 3 over USB-C. The Katana:GO has a lithium-ion battery good for about 5 hours. The Katana-25 and the stage models run from the mains.
Which Boss Katana has Bluetooth?
The Katana-25 and the Katana:GO have Bluetooth audio and MIDI built in, and the Mini X has Bluetooth audio. The Gen 3 50, 50 EX, 100, 100/212 and Head have a slot for BOSS's BT-DUAL adaptor, sold separately; the Artist Gen 3 does not list one. Bluetooth does not appear in the MkI or MkII owner's manuals.
Which Katana has a tuner?
The Katana-25, the Mini X and the Katana:GO each have a tuner described in their manuals. The MkI and MkII owner's manuals, the Gen 3 reference manual and the Katana-Mini's manual do not describe one.
How much does a Boss Katana weigh?
By BOSS's specifications: Katana-50 11.6 kg (50 EX 11.7 kg), Katana-100 14.8 kg, 100/212 19.8 kg, Head 8.8 kg and Artist 19 kg, the same on the MkII and Gen 3. The Katana-25 is 4.8 kg, the Mini 1.2 kg, the Mini X 2.7 kg with its strap, and the Katana:GO 65 g.
Is the Katana Head a full 100 watts?
Into an external cabinet, yes: BOSS rates the Katana-Head at 100 W using an external speaker and 30 W on its own built-in 5-inch speaker. The MkII Head has the same ratings. Its Speaker Out jack takes a cabinet of 8 ohms or more.
Which Boss Katana is the quietest for home practice?
Every stage Katana's Power Control has a 0.5 W position, and the Katana-25 has one too, so any of them plays quietly with the amp still working hard. For silent practice, plug headphones into the phones jack, which mutes the speaker, or use the Katana:GO, which is a headphone amp with no speaker.
Sources
The numbers in brackets in the text point to this list.
- BOSS: KATANA (MkI) Owner's Manual (PDF)
- BOSS: KATANA Mk II Owner's Manual (PDF)
- BOSS: KATANA Gen 3 Reference Manual (PDF)
- BOSS: Katana Gen 3 launch press release, 23 May 2024
- BOSS: KATANA-25 Reference Manual (PDF)
- BOSS: Katana-25 product page
- BOSS: KATANA-MINI Owner's Manual (PDF)
- BOSS: KATANA-MINI X Owner's Manual (PDF)
- BOSS: Katana-25 press release, 29 October 2026
- BOSS: KATANA:GO product page and specifications
- BOSS: KATANA:GO Owner's Manual (PDF)
Gear in this guide
Settings for your own amp
This guide covers what is true of every rig. For a specific song on a specific amp, Tonelify reads the documented chain behind the recording and returns gain, bass, middle, treble and presence values for the controls your amp actually has. A first plan starts with 7 days free, $0 today.


