Tonelify
Black Friday40% off yearly
PedalDelay

MXR Carbon Copy Analog Delay settings

⚡ Match a tone on this pedal
Front panel4 controls
  • Regen
  • Mix
  • Delay
  • Mod
The controls on the MXR Carbon Copy Analog Delay, drawn in a row rather than in the real panel layout.

How do you dial in a specific tone on a MXR Carbon Copy Analog Delay?

Time and modulation effects sit at a specific point in a chain and change character completely if they move. Settings for the MXR Carbon Copy Analog Delay come with the position in the signal path, not just the knob values, because a delay in front of a driven amp and the same delay in a loop are two different sounds.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

MXR Carbon Copy Settings Cheat Sheet: knob positions for memphis slap, golden age guitar god, skank'n dub, from noon and long lead on one page

Free download

Printable cheat sheet: PDF and PNG

The memphis slap, golden age guitar god, skank'n dub, from noon and long lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.

Starting settings on the MXR Carbon Copy Analog Delay

Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not MXR's numbers: move one control at a time from here.

Memphis Slap

Mix 11:30, Regen 7:30, Delay 9:30, Mod switch off. The first of MXR's sample settings, read from MXR's drawing to the nearest half hour. Regen sets the number of repeats, so 7:30 is close to minimum, and the short Delay gives a single quick echo behind the note. MXR's page calls this end of the pedal crisp bathroom slap echoes.

MXR's sampleCarbon Copy Memphis Slap
  • Mix 11:30
  • Regen 7:30
  • Delay 9:30
  • Mod switch off

Read from MXR's drawing, to the nearest half hour.

Golden Age Guitar God

Mix 7:30, Regen 8:00, Delay 1:00, Mod switch on. MXR's second sample, read from the drawing to the nearest half hour. MXR's manual says fully counterclockwise on Mix is 100% dry, so 7:30 leaves only a faint echo under the guitar, with few repeats and the modulation on. If your guitar covers it completely, raise Mix slowly.

MXR's sampleCarbon Copy Golden Age Guitar God
  • Mix 7:30
  • Regen 8:00
  • Delay 1:00
  • Mod switch on

Read from MXR's drawing, to the nearest half hour.

Skank'n Dub

Mix 11:30, Regen 12:30, Delay 2:00, Mod switch on. MXR's third sample, read from the drawing to the nearest half hour. Regen past noon gives a good number of repeats, and a Delay at 2:00 leaves space between them for offbeat chords. Because the switch is on, the repeats also carry the modulation.

MXR's sampleCarbon Copy Skank'n Dub
  • Mix 11:30
  • Regen 12:30
  • Delay 2:00
  • Mod switch on

Read from MXR's drawing, to the nearest half hour.

MXR's starting point

Mix 12:00, Regen 12:00, Delay 12:00. MXR's manual says to start with all controls at 12 o'clock, and these three positions are that line, not a reading from a drawing. The manual doesn't set the Mod switch for this start, so try it both ways. From here, set Delay for the time you want, Mix for how loud the echoes are, and Regen for how many you hear.

MXR's startCarbon Copy from noon
  • Mix 12:00
  • Regen 12:00
  • Delay 12:00

MXR's words: start with all controls at 12 o'clock.

Long lead delay

Mix 11:00, Regen 1:00, Delay 3:30, Mod switch on. This one is Tonelify's, not MXR's. MXR's page says the pedal goes as far as epic, Gilmouresque delays, and this is a start for that end: a long Delay close to the 600 ms top of the range, several repeats, and Mix below noon so the echoes stay behind the solo. This is not a setting from any player's rig. If you want more repeats, raise Regen in small steps from here.

Tonelify's startCarbon Copy long lead
  • Mix 11:00
  • Regen 1:00
  • Delay 3:30
  • Mod switch on

Tonelify's starting point, not MXR's.

Chasing one song? Name it and the matcher writes that song's settings for the MXR Carbon Copy Analog Delay.

Match a song to this pedal7 days free, $0 today

What controls does the MXR Carbon Copy Analog Delay have?

The MXR Carbon Copy Analog Delay has 4 controls on its front panel: Regen, Mix, Delay and Mod switch.

MXR Carbon Copy Analog Delay specifications

Front panel
Regen, Mix, Delay, Mod switch

What the MXR Carbon Copy Analog Delay panel means when you dial it in

Its controls are Regen, Mix, Delay and Mod switch, and settings for this pedal are written against those names rather than a generic level, tone and gain.

MXR Carbon Copy Analog Delay questions

What is the best starting point for the MXR Carbon Copy?

MXR's manual says to start with all controls at 12 o'clock. Then Delay sets the delay time, Regen sets the number of repeats, and Mix controls the blend of wet and dry signals.

What do the Carbon Copy's knobs do?

MXR's manual says Regen sets the number of repeats, Mix controls the blend of wet and dry signals, and Delay sets the delay time. The Mod switch toggles the modulation on and off, with a blue LED when it is on.

Can the Carbon Copy go fully wet?

Yes. MXR's manual says fully clockwise on Mix gives 100% wet signal, and fully counterclockwise gives 100% dry signal.

What is the delay range of the Carbon Copy?

20 ms to 600 ms, per MXR's manual. MXR doesn't print a time for each knob position, so this page gives clock positions and no milliseconds for them.

How do I adjust the modulation on the Carbon Copy?

Internally, with a 2 mm slotted screwdriver. MXR's manual says modulation width and speed can be adjusted that way, and its product page calls them two internal trim pots. The manual lists the modulation speed as 0.2 Hz to 2.2 Hz. The Mod switch only turns the effect on and off.

Is the Carbon Copy analog?

Yes. MXR's manual says it uses 100% analog bucket-brigade technology, and the product page says the sound is made possible only by old-school analog bucket brigade technology.

What are MXR's sample settings for the Carbon Copy?

The manual draws three: Memphis Slap, Skank'n Dub and Golden Age Guitar God. All three are on this page, read from the drawing to the nearest half hour.

What power does the Carbon Copy need?

9 V DC at 26 mA. MXR's manual says it runs on one 9-volt battery, installed by removing the bottom plate, or a 9-volt adapter such as the Dunlop ECB003 or ECB003EU, or a DC Brick.

Is the Carbon Copy true bypass?

Yes. MXR's manual lists True Hardwire, and the product page lists true bypass.

What are the Carbon Copy's specs and price?

Input impedance 1 M ohm, output impedance 1 k ohm, and 2:1 noise reduction, per MXR's manual. MXR's product page listed it at $159.99 when Tonelify read it on 3 November 2026.

Where does the MXR Carbon Copy Analog Delay go in the signal chain?

After the drive stage. Running a time or modulation effect into a distorted input smears the repeats into the distortion instead of layering them over it, which is why this kind of pedal usually belongs in an effects loop where the amp has one.

Does Tonelify support the MXR Carbon Copy Analog Delay?

Yes, and its front panel is stored, so settings only ever reference controls this pedal has: Regen, Mix, Delay, Mod switch. You will not be told to set a knob that is not there.

Sources

Panel, specifications and dates checked against these on .

Memphis Slap, Golden Age Guitar God and Skank'n Dub are MXR's sample settings, read from the drawing in the manual to the nearest half hour. The noon start is the manual's own line. The long lead panel is Tonelify's starting point.

More MXR gear

Similar pedals from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the MXR Carbon Copy Analog Delay in it. A first plan starts with 7 days free, $0 today.