Boss RV-6 Reverb settings
⚡ Match a tone on this pedal- E.Level
- Tone
- Time
- Mode
How do you dial in a specific tone on a Boss RV-6 Reverb?
Time and modulation effects sit at a specific point in a chain and change character completely if they move. Settings for the Boss RV-6 Reverb come with the position in the signal path, not just the knob values, because a delay in front of a driven amp and the same delay in a loop are two different sounds.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact pedal, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this unit only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the unit.

Free download
Printable cheat sheet: PDF and PNG
The hall, plate, spring, shimmer, dynamic and +delay settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Boss RV-6 Reverb
Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not Boss's numbers: move one control at a time from here.
Hall for everyday playing
Mode Hall, E.Level 11:00, Tone 12:00, Time 1:00. This setting is Tonelify's, because BOSS's manual draws no settings for the RV-6. BOSS says Hall simulates the reverberation of a hall and produces clear and spacious reverberation. E.Level adjusts the volume of the reverb sound, so below noon keeps the guitar in front. If the notes start to wash together, turn Time down first.
- Mode Hall
- E.Level 11:00
- Tone 12:00
- Time 1:00
Tonelify's starting point, not BOSS's.
Short plate
Mode Plate, E.Level 10:00, Tone 1:00, Time 11:00. Tonelify's start, not BOSS's. BOSS says Plate simulates a plate reverb, a unit that uses the vibration of a metal plate, and that it produces metallic-sounding reverberation with an extended high-frequency range. A short Time and low E.Level add a sheen to chords without making them sound far away. Bring Tone back to noon if the top end gets too bright.
- Mode Plate
- E.Level 10:00
- Tone 1:00
- Time 11:00
Tonelify's starting point, not BOSS's.
Spring for surf
Mode Spring, E.Level 1:00, Tone 2:00, Time 12:00. Tonelify's start, not BOSS's. BOSS says Spring simulates a spring reverb built into a guitar amp, and its product page says you can surf it up with a vintage-style Spring reverb. E.Level past noon and Tone up bring out the drip. Use a clean amp and pick close to the bridge. For a quieter amp spring, drop E.Level to about 10:00.
- Mode Spring
- E.Level 1:00
- Tone 2:00
- Time 12:00
Tonelify's starting point, not BOSS's.
Shimmer for ambient chords
Mode Shimmer, E.Level 12:00, Tone 1:00, Time 2:00. Tonelify's start, not BOSS's. BOSS says Shimmer is distinctive for its sparkling high-frequency range, and produces fantasy-like reverberation wrapped in spacious overtones. A long Time gives the overtones room to build under held chords. Play slowly, and turn E.Level down if the shimmer covers the notes.
- Mode Shimmer
- E.Level 12:00
- Tone 1:00
- Time 2:00
Tonelify's starting point, not BOSS's.
Dynamic for lead lines
Mode Dynamic, E.Level 12:00, Tone 12:00, Time 1:00. Tonelify's start, not BOSS's. BOSS says Dynamic automatically sets the depth of the effect according to your performance, and produces deep reverberation without blurring the overall shape of your playing. That makes it the mode to try when you want plenty of reverb on a solo without losing the fast notes.
- Mode Dynamic
- E.Level 12:00
- Tone 12:00
- Time 1:00
Tonelify's starting point, not BOSS's.
Reverb with delay
Mode +Delay, E.Level 11:00, Tone 12:00, Time 12:00. Tonelify's start, not BOSS's. BOSS says +Delay is reverb combined with delay, and that the synergistic effect provides rich reverberation. With the knobs in the middle you get both on one pedal, so start here before reaching for a separate delay. Turn Time up for a bigger wash.
- Mode +Delay
- E.Level 11:00
- Tone 12:00
- Time 12:00
Tonelify's starting point, not BOSS's.
Chasing one song? Name it and the matcher writes that song's settings for the Boss RV-6 Reverb.
The eight Boss RV-6 modes
BOSS's own description of each position on the Mode knob, with Tonelify's first setting for each. Room and Modulate are the two modes without a panel above.
| Mode | What BOSS says | Tonelify's start |
|---|---|---|
| +Delay | Reverb combined with delay, for rich reverberation | E.Level 11:00, Tone 12:00, Time 12:00 |
| Shimmer | Sparkling high-frequency range, wrapped in spacious overtones | E.Level 12:00, Tone 1:00, Time 2:00 |
| Dynamic | Sets the depth to your performance without blurring your playing | E.Level 12:00, Tone 12:00, Time 1:00 |
| Room | Simulates a room, with warm reverberation | E.Level 10:00, Tone 12:00, Time 10:00 |
| Hall | Simulates a hall, clear and spacious | E.Level 11:00, Tone 12:00, Time 1:00 |
| Plate | Metallic-sounding, with an extended high-frequency range | E.Level 10:00, Tone 1:00, Time 11:00 |
| Spring | Simulates a spring reverb built into a guitar amp | E.Level 1:00, Tone 2:00, Time 12:00 |
| Modulate | Adds modulation to hall reverb | E.Level 11:00, Tone 11:00, Time 2:00 |
What controls does the Boss RV-6 Reverb have?
The Boss RV-6 Reverb has 4 controls on its front panel: E.Level, Tone, Time and Mode.
Boss RV-6 Reverb specifications
- Front panel
- E.Level, Tone, Time, Mode
What the Boss RV-6 Reverb panel means when you dial it in
Its controls are E.Level, Tone, Time and Mode, and settings for this pedal are written against those names rather than a generic level, tone and gain.
Boss RV-6 Reverb questions
What do the knobs on the Boss RV-6 do?
BOSS's manual says E.Level adjusts the volume of the reverb sound, Tone adjusts its tone color, Time adjusts its length, and the Mode knob selects the reverb effect mode. BOSS's product page adds that many parameters are adjusted inside as you turn Time and Tone.
Does the RV-6 change my dry guitar tone?
BOSS's product page says your straight guitar tone always remains pure analog as the effect is blended in. So the dry signal stays analog while the reverb is added, per BOSS.
Does the RV-6 have trails when you turn it off?
Yes. BOSS's manual says the reverb sound remains even when you turn off the effect. There is one exception: in the wet-only setup through INPUT-B, the outputs are muted when the effect is off.
How do I get a 100% wet signal from the RV-6?
Plug into INPUT-B only. BOSS's manual says you then get only the reverb sound with no direct sound, and its product page calls it a 100-percent wet sound for rigs with parallel chains and mixers. The outputs are muted when the effect is off.
Can I use the RV-6 in stereo?
Yes. BOSS's product page lists mono, mono-to-stereo and stereo-to-stereo operation, and the manual draws all three. For a mono output, use OUTPUT-A (MONO).
Which expression pedal works with the RV-6?
BOSS's manual names the Roland EV-5 and BOSS EV-30 at the jack, and also lists the FV-500H and FV-500L as options. BOSS's product page lists the FV-500H, FV-500L and Roland EV-5. The manual says to use only the specified pedal. BOSS says it controls the reverb depth or effect level in real time.
How much current does the RV-6 draw?
BOSS's two documents differ. The owner's manual says 70 mA, and the product page says 95 mA. The page also gives about 3 hours on an alkaline battery where the manual gives about 4.5 hours. Tonelify would plan your power supply around the higher 95 mA.
Does the RV-6 run on a battery?
Yes. BOSS's manual says to use an alkaline battery, and that the INPUT jack doubles as the power switch, so unplug the input cable to save it. It also takes a BOSS PSA series adaptor, sold separately. The effect is on immediately after power-up.
What is the difference between Hall and Modulate on the RV-6?
BOSS says Hall simulates the reverberation of a hall, and Modulate adds modulation to hall reverb, producing extremely good-feeling reverberation. Modulate is the swirling one: BOSS's product page calls it swirling richness.
How big is the Boss RV-6?
73 mm wide, 129 mm deep and 59 mm high, and 450 g, per BOSS's manual and product page. The input impedance is 1 M ohm, the output impedance 1 k ohm, and the recommended load is 10 k ohm or greater.
Where does the Boss RV-6 Reverb go in the signal chain?
After the drive stage. Running a time or modulation effect into a distorted input smears the repeats into the distortion instead of layering them over it, which is why this kind of pedal usually belongs in an effects loop where the amp has one.
Does Tonelify support the Boss RV-6 Reverb?
Yes, and its front panel is stored, so settings only ever reference controls this pedal has: E.Level, Tone, Time, Mode. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
BOSS's manual draws no settings for the RV-6, so every clock position on this page is Tonelify's starting point. What the modes and knobs do is BOSS's, from the owner's manual and the product page.
More Boss gear
Similar pedals from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the Boss RV-6 Reverb in it. A first plan starts with 7 days free, $0 today.