Positive Grid Spark 40 settings
⚡ Match a tone on this amp- Amp Type
- Gain
- Bass
- Mid
- Treble
- Master
- Mod
- Delay
- Reverb
- Output
How do you dial in a specific tone on a Positive Grid Spark 40?
The Positive Grid Spark 40 is a modelling amp, so a tone match here has two halves: which model or voicing to select, and where to set the controls once it is selected. Getting the second right on the wrong model gets you nowhere. Tonelify picks the voicing first and writes the knob positions against it, using the front panel this unit actually has.
Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact guitar amp, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.
Settings for this amp only ever use controls it actually has, because its front panel is stored in our gear database. You will not be told to set a knob that is not on the amp.

Free download
Printable cheat sheet: PDF and PNG
The clean, blues, classic rock, metal and lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.
Starting settings on the Positive Grid Spark 40
Positions on a 0 to 10 scale, with 5 at twelve o'clock. They are where to begin, not Positive Grid's numbers: pick the amp type first, then move one control at a time from here.
Clean
Black Duo, the Spark model Positive Grid says is inspired by a Fender Twin Reverb. Gain 2 to 3, Bass 5, Mid 5, Treble 6, Reverb about 3. Turn Amp Type to CLEAN, and if the Spark app shows a model other than Black Duo, pick Black Duo there: Positive Grid's manual says the knob changes the amp model in the current preset and the app reaches the models it cannot. Keep Gain low and take the level from Master, so the clean stays clear when you strum hard. Silver 120, inspired by a Roland JC120, is the other clean to try at the same settings.
- Gain 2 to 3
- Bass 5
- Mid 5
- Treble 6
- Reverb about 3
Edge of breakup and blues
Lux Verb, inspired by a Fender Deluxe Reverb, or Blues Boy, inspired by a Fender Blues Junior. Gain 3 to 4, Bass 5, Mid 6 to 7, Treble 5 to 6, Reverb about 3. Positive Grid puts both in its Crunch group, so start with Amp Type on CRUNCH and pick the model in the app. Set Gain where hard picking just starts to break up, then use the guitar's volume: back to 7 or 8 for rhythm, up to 10 for a solo. For more push, put Over Drive or Tube Drive from the app's Drive group in front of the amp with its drive low.
- Gain 3 to 4
- Bass 5
- Mid 6 to 7
- Treble 5 to 6
- Reverb about 3
Classic rock
Plexiglas, inspired by a Marshall Super Lead 100, or JM45, inspired by a Marshall JTM45. Gain 5 to 6, Bass 5, Mid 6 to 7, Treble 6, Reverb about 2. Keep the mids up: rock guitar sits in the midrange, and scooping it is the usual reason a preset sounds thin next to a band. For hard rock, raise Gain to 6 or 7 and leave Mid where it is. Both models are in Positive Grid's Crunch group, with Lux Verb and Blues Boy, so Amp Type goes on CRUNCH.
- Gain 5 to 6
- Bass 5
- Mid 6 to 7
- Treble 6
- Reverb about 2
Metal
Insane, inspired by an EVH 5150 III, Treadplate, inspired by a Mesa Boogie Triple Rectifier, or Insane 6508, inspired by a Peavey 6505. Gain 6 to 7, Bass 4 to 5, Mid 5, Treble 6 to 7, Reverb 1 or off. All three are in the Metal group, so turn Amp Type to METAL and pick the model in the app. Switch on the Noise Gate, the one effect in the app's Gate group, so the silence between riffs stays silent. Each step of Gain past 7 adds fizz and blurs palm mutes more than it adds weight.
- Gain 6 to 7
- Bass 4 to 5
- Mid 5
- Treble 6 to 7
- Reverb 1 or off
Noise Gate on in the Spark app.
Lead
SLO 100, inspired by a Soldano SLO-100, or American High Gain, inspired by a Mesa Boogie JP-2C, both in the High Gain group, so start with Amp Type on HI-GAIN. Gain 6, Bass 5, Mid 6 to 7, Treble 6, Delay about 3, Reverb about 2. For a solo, add Delay rather than more Gain, and set its time with the TAP button: Positive Grid's manual says tapping it more than twice sets the delay tempo, and the help centre says the TAP light flashes at the tempo the delay and modulation effects read. The Delay knob sets how much delay you hear; Digital Delay, Vintage Delay, Echo Tape and the rest are chosen in the app.
- Gain 6
- Bass 5
- Mid 6 to 7
- Treble 6
- Delay about 3
- Reverb about 2
Delay timed on TAP: tap it more than twice.
Saving the five to the four preset buttons
The Spark 40 stores four presets, on the buttons numbered 1 to 4. Tap a button to load its preset; once you turn a knob or change something in the app, the button's red LED flashes to show the preset has been modified, and holding the button down saves the current tone to that slot, after which the LED stops flashing. Four slots for five settings means one has to wait in the app: clean, classic rock, metal and lead on 1 to 4 covers most songs. A factory reset erases all four presets and the Bluetooth pairing, so back them up in the Spark app first.
Chasing one song? Name it and the matcher writes that song's settings for the Positive Grid Spark 40.
Positive Grid Spark 40 amp list
Positive Grid's list has 33 amp models once the three preamps marked for the Spark LIVE and EDGE are left out, and 33 is the count in the Spark 40's specification: 25 for electric guitar in five groups, 4 acoustic and 4 bass. The Amp Type knob has seven positions named after the groups, ACOUSTIC, BASS, CLEAN, GLASSY, CRUNCH, HI-GAIN and METAL. Positive Grid does not say which model each position loads, and the Spark app picks any of the 33 for the current preset.
| Spark model | Group | Inspired by |
|---|---|---|
| Silver 120 | Clean | Roland JC120 |
| Black Duo | Clean | Fender Twin Reverb |
| AD Clean | Clean | Orange AD 30 |
| MATCH DC | Clean | Matchless DC30 |
| ODS 50 | Clean | Dumble ODS 50 HRM |
| Tweed Bass | Glassy | Fender Bassman |
| AC Boost | Glassy | Vox AC30 |
| Checkmate | Glassy | Teisco Checkmate 20 |
| Two Stone SP50 | Glassy | Two Rock Studio Pro 50 |
| American Deluxe | Crunch | Fender '57 Custom Deluxe |
| Plexiglas | Crunch | Marshall Super Lead 100 |
| JM45 | Crunch | Marshall JTM45 |
| Lux Verb | Crunch | Fender Deluxe Reverb |
| Blues Boy | Crunch | Fender Blues Junior |
| RB 101 | High Gain | Bogner Ecstasy 101 |
| British 30 | High Gain | Orange AD30 |
| American High Gain | High Gain | Mesa Boogie JP-2C |
| SLO 100 | High Gain | Soldano SLO-100 |
| YJM100 | High Gain | Marshall YJM100 Signature |
| Treadplate | Metal | Mesa Boogie Triple Rectifier |
| Insane | Metal | EVH 5150 III |
| SwitchAxe | Metal | H&K Switch Blade |
| Rocker V | Metal | Orange Rockerverb 50 |
| BE 101 | Metal | Friedman BE100 |
| Insane 6508 | Metal | Peavey 6505 |
| Pure Acoustic | Acoustic | PG Original |
| Fishboy | Acoustic | Fishman Acoustic Amp |
| Jumbo | Acoustic | PG Original |
| Flat Acoustic | Acoustic | PG Original |
| RB-800 | Bass | Gallien-Krueger 800RB |
| Sunny 3000 | Bass | Sunn 300T |
| W600 | Bass | Eden WTP600 |
| Hammer 500 | Bass | Aguilar Tone Hammer 500 |
Positive Grid Spark 40 effects list
44 effects in Positive Grid's list once the vocal and mic effects marked for the Spark LIVE and EDGE are left out, in six groups. The Spark 40's specification gives 43, and the list does not say which one the Spark 40 lacks. On the amp, the Mod, Delay and Reverb knobs set how much of each effect you hear; the effect itself and its detailed settings are chosen in the Spark app. Auto Wah is in the Comp group because Positive Grid puts it there.
- Gate (1)
- Noise Gate
- Comp (6)
- LA Comp, Sustain Comp, Red Comp, Bass Comp, Optical Comp, Auto Wah
- Drive (10)
- Booster, Tube Drive, Over Drive, Fuzz Face, Black Op, Bass Muff, Guitar Muff, Bassmaster, SAB Driver, Clone Drive (Klon Centaur)
- MOD/EQ (12)
- Tremolo, Chorus, Flanger, Phaser, Vibrato, UniVibe, Cloner Chorus, Classic Vibe, Tremolator, Tremolo Square, Guitar EQ, Bass EQ
- Delay (6)
- Digital Delay, Echo Filt, Vintage Delay, Reverse Delay, Multi Head, Echo Tape
- Reverb (9)
- Room Studio A, Chamber, Hall Natural, Plate Short, Hall Ambient, Plate Rich, Hall Medium, Plate Long, Room Studio B
What controls does the Positive Grid Spark 40 have?
The Positive Grid Spark 40 has 10 controls on its front panel: Amp Type, Gain, Bass, Mid, Treble, Master, Mod, Delay, Reverb and Output.
Positive Grid Spark 40 specifications
- Power
- 40W stereo
- Speaker
- 2x4"
- Voicings
- Acoustic, Bass, Clean, Glassy, Crunch, Hi-Gain, Metal
- Front panel
- Amp Type, Gain, Bass, Mid, Treble, Master, Mod, Delay, Reverb, Output
What the Positive Grid Spark 40 panel means when you dial it in
40W stereo through a 2x4". There is enough headroom to hold a clean setting at band volume, so the gain control does the driving rather than the master. There is no presence control on this panel, so everything above the treble band has to come from the treble control and the guitar's own tone knob. A setting copied from an amp with presence has to be rebalanced here. Gain and master volume are separate, so the preamp can be driven hard at a volume that is liveable. Where a tone sits between the two is part of the answer, not a detail. Reverb is onboard, so a tone that needs it does not need a pedal in the chain. The selectable voicings are Acoustic, Bass, Clean, Glassy, Crunch, Hi-Gain and Metal. Picking the voicing comes before the knob positions, because the same numbers land somewhere else on each one.
Positive Grid Spark 40 questions
What amps are in the Positive Grid Spark 40?
33 amp models, Positive Grid's specification says: 25 for electric guitar in five groups, Clean, Glassy, Crunch, High Gain and Metal, plus 4 acoustic and 4 bass. Positive Grid names the amp each is inspired by, from Silver 120 (Roland JC120) and Black Duo (Fender Twin Reverb) to Plexiglas (Marshall Super Lead 100), Treadplate (Mesa Boogie Triple Rectifier) and Insane (EVH 5150 III). The first manual gave 30; firmware 1.4.3.174, in July 2021, added ODS 50 (Dumble ODS 50), Blues Boy (Fender Blues Junior) and Insane 6508 (Peavey 6505). The full table is below.
What does the Amp Type knob on the Spark 40 do?
It changes the amp model in the current preset. It has seven positions, ACOUSTIC, BASS, CLEAN, GLASSY, CRUNCH, HI-GAIN and METAL, the names of the groups in Positive Grid's amp list. Positive Grid's manual says to use the Spark app for amp models the knob cannot select, and it does not say which model each position loads, so check the app after you turn it.
What effects does the Spark 40 have?
Positive Grid's specification gives 43, in six groups: Noise Gate, compressors, drives, modulation and EQ, delays and reverbs. Its app list has 44 that are not marked for the Spark LIVE or EDGE, and it does not say which one the Spark 40 lacks. The Mod, Delay and Reverb knobs on the amp set how much of each effect you hear; the effect type and its detailed settings are chosen in the Spark app.
How do you save a preset on the Spark 40?
Hold down one of the preset buttons, 1 to 4: the current tone is saved to that slot, and its LED stops flashing. A flashing red LED means the loaded preset has been changed, by the knobs or in the app, and not saved. In the Spark app, Save to Hardware saves the current preset to one of the amp's four slots.
Can you use the Spark 40 without the app?
Yes. Positive Grid says it works as a standalone amp, with the four presets saved on it and the knobs on top. To set up amps and pedals, change parameters or manage presets you need the Spark app, and anything you change there has to be saved to the amp to be there when you play without the app.
Does the Spark 40 have a tuner?
Yes. Hold the TAP/TUNER button. The amp is muted while the tuner is on, and the four preset LEDs show whether the string is flat, sharp or in tune. Single-tap TAP/TUNER or a preset button to leave it. Positive Grid calls it a chromatic tuner, and the Spark app shows the exact note if you connect it.
Does the Spark 40 have a looper?
No. Positive Grid says the Spark 40 has no looper on the amp or in the app, because the feature needs more RAM and Flash memory than its hardware has.
Can you record with the Spark 40 over USB?
Yes. Connected to a computer with its USB cable it is an audio interface called Spark USB Audio, one in and two out at 16 bit and 48 kHz, for macOS and Windows; Positive Grid's help centre has a Windows driver for ASIO. By default the guitar is recorded after the amp and effects. For a dry signal, bypass all the amp and effect modules in the app. The MUSIC VOLUME knob sets the USB playback level, and OUTPUT what you hear from the amp.
Can the Spark 40 play music over Bluetooth?
Yes. Pick Spark 40 Audio in your device's Bluetooth list, and MUSIC VOLUME sets the music's level. Positive Grid's specification gives Bluetooth 4.2. To clear the pairing, switch the amp on while holding preset button 4 for 3 seconds, then remove the Spark from your device's Bluetooth settings before pairing again. A cable in AUX In turns Bluetooth and USB playback off.
Can you use headphones with the Spark 40?
Yes, on the 1/8 inch headphone jack on the top panel. Plugging in mutes the speakers.
Can you use a footswitch with the Spark 40?
Yes, Positive Grid's Spark Control X, which connects through the Spark app. Update the app and the amp's firmware first: firmware 1.9.7.246, in May 2024, added Spark Control X expression pedal support. With a Spark 40 the app has to stay open in the foreground and connected to the amp while you use it.
How do you factory reset the Spark 40?
Switch it off. Hold TAP while you switch it on and let go when it starts to blink, then hold the blinking TAP until all four preset LEDs blink once and let go straight away. When TAP blinks with the CH1 LED on, the reset is done; a short press on TAP before then cancels it. It erases all four presets on the amp and the Bluetooth pairing, so back up your presets in the Spark app first.
What power supply does the Spark 40 use?
The adapter in the box: 19 V at 2.5 A, on a barrel plug 5.5 mm outside and 2.1 mm inside, centre positive, from 100 to 240 V mains at 50 or 60 Hz. Positive Grid's manual says to use only the specified adapter, since any other may cause malfunctions.
What is the Experience Jimi Hendrix pack on the Spark?
An in-app purchase of six amps and six effects modelled on Hendrix's gear, among them J.H. 45/100 (Marshall JTM45/100), J.H. Tone City 100 (Sound City One Hundred) and J.H. Legendary Wah (Vox 846). Firmware 1.5.4.102, in October 2021, enabled it on the Spark 40. Positive Grid stopped selling it on 30 April 2026.
What are the best Positive Grid Spark 40 settings for metal?
Start with Insane or Treadplate at Gain 6 to 7, Bass 4 to 5, Mid 5, Treble 6 to 7 and Reverb 1 or off, with the Noise Gate on in the app. These are starting points rather than Positive Grid's numbers. For tighter palm mutes, put a drive from the Drive group in front of the amp with its drive near zero and its level high, and take Gain a step lower.
Does Tonelify support the Positive Grid Spark 40?
Yes, and its front panel is stored, so settings only ever reference controls this guitar amp has: Amp Type, Gain, Bass, Mid, Treble, Master, Mod, Delay, Reverb, Output. You will not be told to set a knob that is not there.
Sources
Panel, specifications and dates checked against these on .
- Positive Grid: Spark amp user manual (PDF)
- Positive Grid: Technical Specification for Spark (40)
- Positive Grid: Amp & Effect List
- Positive Grid: Spark (40) Firmware Release Notes
- Positive Grid: How to Save/Switch Presets on Spark 40
- Positive Grid: Can I use the Spark Amp without the Spark app?
- Positive Grid: Onboard Tuner on Spark 40
- Positive Grid: Tap Tempo on Spark 40
- Positive Grid: Does Spark (40) come with a looper?
- Positive Grid: Connect Spark Control X to Spark 40
- Positive Grid: Factory Reset for Spark (40)
- Positive Grid: Technical Specification for Spark (40)'s Power Supply
More Positive Grid gear
Similar amps from other makers
Settings for the song you are chasing
Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for the controls the Positive Grid Spark 40 has. A first plan starts with 7 days free, $0 today.