Tonelify
Black Friday40% off yearly
Multi-FX and modellersFloor modeller

NUX MG-101 presets and settings

Entry-level floor modeller with two footswitches, a built-in expression pedal and a 2.4 inch colour screen. 25 electric amps, 25 cabinet IRs and 45 effects in ten blocks, a 40 second mono looper with a drum machine, USB recording and a TRRS jack for a headset mic.

⚡ Match a tone on this unit

How do you dial in a specific tone on a NUX MG-101?

A multi-effects unit gives you the whole chain in one box, which means the order of the blocks is as much of the answer as the values inside them. Settings for the NUX MG-101 name the amp model, the block order and the parameters together, rather than handing you numbers with no chain to put them in.

Name the song you are chasing in the tone matcher and Tonelify returns the settings for this exact multi-effects unit, not the settings the original artist used. Those are two different things: the recording was made on gear most players do not own.

NUX MG-101 Settings Cheat Sheet: knob positions for clean, blues, classic rock, metal and lead on one page

Free download

Printable cheat sheet: PDF and PNG

The clean, blues, classic rock, metal and lead settings from this page, together on one sheet with short tips. The PDF prints on white; the PNG is the dark version for your phone.

Starting settings on the NUX MG-101

Positions as clock times, since the knobs carry no numbers: 12:00 is the middle of the travel. They are where to begin, not NUX's numbers: pick the amp model first, then move one control at a time from here.

Clean

Twin Rvb. Gain 9:00, Bass 12:00, Mid 12:00, Treble 1:00, with LEVEL to balance it against your other patches. NUX's manual lists no patch values, so every setting here is Tonelify's starting point, the same positions as on our MG-400 page, since both units run NUX's TSAC-HD amps. On the MG-101's screen a knob pointing straight up reads 50. Press EDIT/EXIT to enter AMP editing, turn SELECT to choose the amp and use the three Parameter Adjustment knobs; PAGE turns to BASS, MID and TREB. For width, add CE-1 in the MOD block, and pick TWIN 212 in the IR block.

Twin Rvb ampMG-101 clean
  • Gain 9:00
  • Bass 12:00
  • Mid 12:00
  • Treble 1:00

CE-1 in MOD for width, TWIN 212 in IR.

Edge of breakup and blues

Brit Blues. Gain 12:00, Bass 11:00, Mid 1:00, Treble 12:00, and any other amp knob at 12:00. Dig in for grit and play lighter to clean up. For more push, put T Screamer in the EFX block, keep its drive low and its level up, so it pushes the amp rather than adding its own distortion. BRIT 212 in the IR block suits it.

Brit Blues ampMG-101 edge of breakup
  • Gain 12:00
  • Bass 11:00
  • Mid 1:00
  • Treble 12:00

T Screamer in EFX, drive low, level up.

Classic rock

PLEXI 100. Gain 2:00, Bass 12:00, Mid 1:00, Treble 1:00. Keep the mids up: rock guitar sits in the midrange, and scooping it is the usual reason a patch sounds thin next to a band. PLEXI 45, BRIT 800 and 1987 X 50W work from the same positions, and GREEN 412 or G12M 412 in the IR block suit them.

PLEXI 100 ampMG-101 classic rock
  • Gain 2:00
  • Bass 12:00
  • Mid 1:00
  • Treble 1:00

Metal

VBER HIGAIN, as the manual prints it, last in the Reference page's amps; its cabinet is UBER 412 in the IR block. Gain 2:00, Bass 1:00, Mid 11:00, Treble 1:00. Turn on the NG block, first in the chain, just high enough to quiet the hiss between chords. Before raising Gain, try T Screamer in the EFX block with its drive low: it tightens palm mutes, where more Gain blurs them. DUAL RECT with RECT 412 is the other high-gain pairing.

VBER HIGAIN ampMG-101 metal
  • Gain 2:00
  • Bass 1:00
  • Mid 11:00
  • Treble 1:00

NG on; T Screamer in EFX before you raise Gain.

Lead

SLO 100. Gain 2:00, Bass 12:00, Mid 1:00, Treble 12:00, with Digi Delay in the DLY block at a low level and a little Hall in RVB. Tap the TAP button in PRESET mode to set the delay's tempo; the button flashes 16 times at the BPM. The MG-101 has no scenes, so put the lead on the patch next to your rhythm patch and step to it with the UP footswitch, and press SAVE to keep it.

SLO 100 ampMG-101 lead
  • Gain 2:00
  • Bass 12:00
  • Mid 1:00
  • Treble 12:00

Digi Delay in DLY, low level; TAP for tempo.

Chasing one song? Name it and the matcher writes that song's settings for the NUX MG-101.

Match a song to this unit7 days free, $0 today

NUX MG-101 amp list

The manual's Reference page shows 25 electric guitar amps, the count NUX gives on the product page. An amp's knobs sit on two pages: on the manual's screens DUAL RECT shows GAIN, PRES and LEVEL, PAGE turns to BASS, MID and TREB, and JAZZ CLEAN has BRIGHT where DUAL RECT has PRES. NUX does not say which real amps they are modelled on.

AMP (25)
Jazz Clean, Deluxe Rvb, Bassmate, Tweedy, Twin Rvb, Hiwire, Cali Crunch, Class A15, Class A30, PLEXI 100, PLEXI 45, BRIT 800, 1987 X 50W, SLO 100, Fireman HBE, DUAL RECT, DIE VH4, Vibro King, Budda, MR.Z.38, Super Rvb, Brit Blues, Match, BRIT 2000, VBER HIGAIN

NUX MG-101 cab list (IRs)

The IR block holds 25 guitar cabinet IRs at 512 samples, and the manual's Reference page shows four microphones for them. Each patch also has a USER slot for its own IR, and there are 12 IR COLLECTION slots besides, loaded from NUX's QuickTone editor.

IR (25)
JAZZ 212, BLACK 112, TWEED 410, TWEED 112, TWIN 212, CUSTOM 412, CALI 112, BLUE 112, BLUE 212, GREEN 412, G12L 412, T75 412, V30 412, SLO 412, HBE 412, RECT 412, BOTM 412, VIBRO 412, EVL 112, BUTQ 212, SUPER 212, BRIT 212, DC 212, G12M 412, UBER 412
Microphones (4)
C414, E906, S57, U87

NUX MG-101 effects list

The manual's Reference page, block by block: 45 models outside the amps and cabinets. The blocks run NG, CMP, EFX, AMP, IR, EQ, MOD, DLY, RVB and P.L, which has MIN/MAX and PRE/POST settings. The wah lives on the expression pedal: the EXP button sets the pedal to WAH, EFX, AMP, MOD, DLY or RVB.

NG (1)
NG
CMP (2)
Red Comp, Rose Comp
EFX (14)
Dist +, RC Bst, AC Bst, Dist UNO, T Screamer, Blues Drive, Morning Drive, Modern Dist, Red Dirt, Katana, Crunch, Touch Wah, Red Fuzz, Muff Dist
EQ (2)
G-EQ, 10-EQ
MOD (14)
CE-1, ST.Chorus, Flange, SCH-1, Ph 90, Phase 100, Chorus+, U-Vibe, Trem, Rty Spk, Vibrato, Harmony, Detune, Classic Chorus
DLY (7)
Analog Delay, Phi Delay, Digi Delay, Modulate, Tape Echo, Reverse, Pan
RVB (5)
Room, Hall, Plate, Spring, Shimmer

NUX MG-101 patch list

NUX prints no full patch list. Patches are numbered by group, 1 to 9, and letter, A to D, and the QuickTone screenshot in the manual shows the names below for 1C to 7C. The front-panel drawing shows 8D, 70's Hard Rock. Firmware updates can change them, so check your own unit.

From the QuickTone screenshot on page 14 of NUX's MG-101 user manual.
PatchName
1CCT J Clean
1DCT TweedB Edge
2AAB Fat Crunch
2BAB Luxe Lead
2CAB Old Clean
2DAB Vocal Solo
3AJoko Ambi Clean
3BJoko Djent
3CJoko Krunch
3DJoko LavaLead
4AYab Clean
4BYab JazzClean
4CYab Comp
4DYab MS Crunch
5ATAMESHIBIKI CL
5BTAMESHIBIKI OD
5CTAMESHIBIKI DS
5DTAMESHIBIKI BLUE
6AAVE ROCK OTOT
6BAVE FIREBOY
6CAVE 40124
6DAVE DJ000NT
7ACella High Gain
7BCella Lead
7CCella Crunch
8D70's Hard Rock

NUX MG-101 specifications

Released
2024

NUX MG-101 questions

What is the NUX MG-101?

NUX's entry-level floor amp modeller, with its manual dated 2024. It runs NUX's TSAC-HD White-Box amp modelling with 25 electric guitar amps and 25 cabinet IRs in 10 signal blocks, on a 2.4 inch colour screen. It has two footswitches, DOWN/LOOP and UP/DRUM, a built-in expression pedal, a looper with a drum machine, USB recording and a TRRS headphone jack for a headset mic. It weighs 920 g.

What amps are in the NUX MG-101?

The manual's Reference page shows 25 electric guitar amps, from Jazz Clean, Deluxe Rvb and Twin Rvb to PLEXI 100, BRIT 800, SLO 100, DUAL RECT, BRIT 2000 and VBER HIGAIN. NUX does not say which real amps they are modelled on. There is no bass or acoustic amp in the list.

Where are the NUX MG-101 presets?

Patches are numbered by group and letter, 1A to 9D, and NUX prints no full list. The QuickTone screenshot in the manual shows 1C to 7C, such as AB Fat Crunch, Joko Djent and Cella High Gain, and the front panel drawing shows 8D, 70's Hard Rock. LEFT and RIGHT jump between groups, and the UP and DOWN footswitches step one patch at a time.

How do you save a patch on the MG-101?

Press SAVE, in PRESET mode or while editing. The screen opens a character grid for the name, then shows Data Saving. In QuickTone, NUX's editor for Mac and PC, you can also save, load and export patches and load IRs.

How many effects does the MG-101 have?

The manual's Reference page shows 45 models outside the amps and cabinets: the NG noise gate, 2 compressors, 14 EFX drives and boosts including Touch Wah, 2 EQs, 14 modulation effects, 7 delays and 5 reverbs. The expression pedal can also run a wah, chosen with the EXP button.

Can you load IRs into the MG-101?

Yes, through NUX's QuickTone editor. NUX gives the IR resolution as 512 samples. Each patch has a USER slot for its own IR, and there are 12 IR COLLECTION slots besides. The built-in IRs are 25 guitar cabinets, with four microphones shown on the Reference page: C414, E906, S57 and U87.

How do you use the tuner on the MG-101?

Press the UP and DOWN footswitches together. A short press on SELECT switches between mute and monitoring, turning SELECT switches between CHROM., G CPS and G STD, and knob 3 sets A4 from 430 to 450 Hz. NUX calls G CPS its guitar compensated tuning. Press UP and DOWN again, or EDIT/EXIT, to leave.

How long is the MG-101 looper?

40 seconds in mono or 20 seconds in stereo. Press JAM, then the LOOP footswitch: one press records, the next plays and the next overdubs; holding it undoes and redoes; two presses stop it, and press and hold clears it. In AR, Auto Recording, the looper waits and starts when you hit the strings.

Does the MG-101 have a drum machine?

Yes. Press JAM, and the DRUM footswitch starts and stops it. The TAP button sets the drum tempo under JAM, PAGE opens more drum options and a BASS, MIDDLE and TREBLE EQ for the drums, and NUX's product page describes auto tempo detection.

What can the MG-101's expression pedal control?

Press EXP to choose the block it runs: WAH, EFX, AMP, MOD, DLY or RVB, or none. In GLOBAL SETTING, EXP Independent makes it act like a separate pedal that stays on when you change patch. NUX's product page says it has a physical toe switch and needs no calibration, though the manual says to run EXP CALIBRATION after a firmware update.

How do you use the MG-101 with a guitar amp?

Press MODE and turn SELECT to one of five output modes: STACK FRONT, STACK REAR, COMBO REAR, COMBO FRONT and STUDIO DIRECT. Knobs 1 to 3 set a global LOW, MID and HIGH EQ for the mode. NUX says every mode except STUDIO DIRECT turns the IR off by default, which is what you want into an amp's input or return.

Does the MG-101 have a master volume?

No. NUX's manual says the MG-101 has no global master volume, so you set the OUTPUT level, and the PHONES level, under GLOBAL SETTING and GLOBAL EQ. Press EDIT/EXIT and SAVE together to open GLOBAL SETTING. The same page holds the input trim and a three-band global EQ at 80 Hz, 500 Hz and 4 kHz.

Can the MG-101 record to a computer or a phone?

Yes. Over USB it works as a recording interface at 48 kHz and 32 bit, and with an OTG adapter it connects to a phone. The 1/8 inch TRRS headphone jack takes a headset with a microphone for live streaming, and MIC & USB in GLOBAL SETTING sets the mic volume, its noise gate and the USB in and out levels.

How do you update the MG-101's firmware?

Connect the USB cable to a computer and hold the DOWN and UP footswitches while you turn the MG-101 on: that starts DFU, Device Firmware Update, mode. NUX's product page has the firmware, V1.1.1 at the time of writing, and an update guide. Afterwards, run a FACTORY RESET and an EXP CALIBRATION, as the manual says.

What is the difference between the MG-101 and the MG-400?

The MG-400 is the bigger unit. Its manual shows 26 amps, a bass and an acoustic among them, four footswitches, three scenes a preset and a looper of 60 seconds in mono. The MG-101 has 25 electric amps, two footswitches, no scenes and a 40 second mono looper, in a smaller box at 920 g. Both run NUX's TSAC-HD amps and load IRs.

What power supply does the MG-101 need?

9V DC, negative tip, from NUX's ACD-006A adaptor, which comes in the box with a USB cable. The manual gives the current draw as under 250 mA.

How do you build a patch on the NUX MG-101?

Pick the amp model first, then set its controls, then add the blocks in signal-chain order: drive before the amp, time and modulation after it. A patch built the other way around ends up compensating for the wrong stage. Tonelify returns the model, the order and the parameters together.

Does Tonelify support the NUX MG-101?

Yes. Name it in the tone matcher along with the song you are chasing and the settings come back adapted to it. Gear does not need to be in the catalog for a match to run.

Sources

Panel, specifications and dates checked against these on .

More NUX gear

Similar multi-effects units from other makers

Settings for the song you are chasing

Name a song and Tonelify reads the documented rig behind the recording, then writes the settings for a rig with the NUX MG-101 in it. A first plan starts with 7 days free, $0 today.